University of Engineering and Technology, Lahore, Pakistan
The University of Engineering and Technology (main) located in the northern part of Lahore on the historical "Grand Trunk Road (G.T. Road)", near the magnificent Shalimar Gardens built during the great Mughal Empire.
The institution started its career in 1921 as the ‘ Mughalpura Technical College ’. Later it became the ‘Maclagan Engineering College’, a name given to it in 1923 when Sir Edwards Maclagan, the then Governor of the Punjab who laid the foundation stone of the main building, now called the Main Block, which still retains its majesty despite the wear and tear of over eight decades.
The institution started its career in 1921 as the ‘ Mughalpura Technical College ’. Later it became the ‘Maclagan Engineering College’, a name given to it in 1923 when Sir Edwards Maclagan, the then Governor of the Punjab who laid the foundation stone of the main building, now called the Main Block, which still retains its majesty despite the wear and tear of over eight decades.
University of Engineering and Technology, Lahore Alumni
Shahid Mehmood
Project Officer at Swansea University
Research
Education
Swansea University 2011 — 2015
PhD, Experimental mat. characterisation & testing procedures for complex computational modelling, (Material Testing, Modelling and Simulations, Polymers, Metals and Composites)
Bournemouth University 2004 — 2005
Master, Project Management
University of Engineering and Technology, Lahore 2000 — 2004
BSc, Metallurgical and Materials Engineering
Experience
Swansea University January 2011 - Present
Risø National Laboratory for Sustainable Energy August 2009 - December 2010
Grays of Cambridge (Pak) Ltd November 2005 - September 2008
Skills
Fracture Mechanics, Materials Science, Modeling, Scanning Electron..., Plastics, Nanomaterials, Hypermesh, Optical Microscopy, Simulations, R&D, Differential Scanning..., Experimentation, Characterization, Research, Simulation, Polymers, Product Development, Manufacturing, Engineering, Nanotechnology, Material Selection, Materials, Mechanical Testing, Testing, Finite Element Analysis, Project Management, Failure Analysis, Dynamic Mechanical..., Design of Experiments, Abaqus, Metallurgy, LaTeX, Microsoft Office, ANSYS, Optimization, Composites
Shahzad Gishkori
Postdoctoral Research Associate at Imperial College London
Wireless
Education
Delft University of Technology 2009 — 2014
Doctor of Philosophy (PhD), Electrical Engineering
Delft University of Technology 2007 — 2009
Master of Science (M.Sc.), Electrical Engineering
University of Engineering and Technology, Lahore 1998 — 2002
Bachelor of Science (B.Sc.), Electrical Engineering
Experience
Imperial College London January 2015 - Present
Université libre de Bruxelles June 2014 - December 2014
Technische Universiteit Delft November 2009 - June 2014
Pakistan Telecommunication Company August 2004 - July 2007
Lahore Electric Supply Company (Wapda) August 2002 - July 2004
Skills
Linear Algebra, Machine Learning, Signal Processing, Simulations, Digital Signal..., Statistical Signal..., Algorithms, Convex Optimization, Wireless Sensor Networks, Digital Signal..., Pattern Recognition, Matlab, Mathematical Modeling, Compressive Sampling, Compressive Sensing, Ultra-wideband Systems, LaTeX, Statistical Learning, Sensors
Shahzad Hafeez
M.Sc. Student FriedrichAlexanderUniversität ErlangenNürnberg, Germany
Research
Education
University of Erlangen-Nuremberg 2013 — 2016
Elite Master’s Programme (M.Sc. with honours), Advanced Materials and Processes
University of Engineering and Technology, Lahore 2009 — 2013
Bachelor of Science (B.Sc.) in, Metallurgical and Materials Engineering, 3.91/4
Experience
Institute of Particle Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg September 2014 - Present
Chair of Glass and Ceramics (WW3), Friedrich-Alexander-Universität Erlangen-Nürnberg April 2014 - August 2014
Ravi Autos Pvt. Ltd. June 2011 - July 2011
Skills
Research, Matlab, Microsoft Office, ImageJ, AFM, UV/Vis, Solid Edge, C++, Nanotechnology
Shahzad Iqbal
Senior RF Engineer at Huawei Technologies
Telecommunications
Education
University of Engineering and Technology, Lahore
Experience
Huawei Technologies July 2014 - Present
AIRCOM International April 2013 - April 2014
Nokia Siemens Networks July 2009 - December 2012
Motorola January 2009 - June 2009
LCC February 2008 - December 2008
Motorola January 2007 - January 2008
Motorola January 2006 - December 2006
Skills
LTE, NetAct, Drive Test, WCDMA, MapInfo, GPRS, TEMS, Actix, TEMS Investigation, Edge, Network Optimization, 3G, BSS, NSN, UMTS, RF, RAN, CDMA, Optimizations, WiMAX, Telecommunications, 2G, Optimization, GSM, RF Planning, HSPA
Shahzad Naveed AHMAD
Vice President EMEA Operations at Interactive Intelligence
Telecommunications
Education
IAE Aix-en-Provence, France 1999 — 2000
MBA Masters AND DESS, Gerneral Management, certificat d'administrartion des entreprises
University of Engineering and Technology, Lahore 1993 — 1998
B.Sc, Electrical Engineering
University of the Punjab, Lahore
Experience
Interactive Intelligence August 2015 - Present
Interactive Intelligence February 2014 - Present
Interactive Intelligence July 2013 - January 2014
Interactive Intelligence April 2011 - July 2013
Interactive Intelligence September 2008 - April 2011
Interactive Intelligence September 2005 - September 2008
Interactive Intelligence January 2005 - December 2005
Interactive Intelligence January 2004 - December 2004
Interactive Intelligence January 2003 - December 2003
Interactive Intelligence June 2000 - December 2002
Skills
Pre-sales, Enterprise Software, Contact Centers, Unified Communications, Management, Strategy, Business Development, PRINCE2, IVR, Salesforce.com, Process Improvement, Service Management, Cloud Computing, Sales Operations, Solution Architecture, Outsourcing, Project Management, Professional Services, Leadership, Telephony, Data Center, Solution Selling, IP, SaaS, ITIL, Call Centers, VoIP, CTI, Telecommunications, Services Management
Shahzeb Rehman
M.Sc. Chemical and Energy Engineering
Chemicals
Education
Otto-von-Guericke-Universität Magdeburg 2011 — 2014
Master of Science (M.Sc.), Chemical and Energy Engineering
University of Engineering and Technology, Lahore 2004 — 2008
Bachelor of Science (B.Sc.), Chemical Engineering
Experience
Sonex Tiles & Ceramic Industries Ltd. Pakistan May 2010 - October 2010
Panaflex Pvt. Ltd. Pakistan May 2009 - April 2010
Dawood Hercules Chemicals, Pakistan June 2007 - July 2007
Skills
Oil, Aspen HYSYS, Wastewater Treatment, Chemistry, Ceramic, Nanotechnology, Process Engineering, Matlab, Process Simulation, Project Engineering, P&ID, Quality Assurance, Chemical Process..., Microsoft Office, Characterization, Chemical Engineering, HAZOP Study, Process Optimization, Environmental..., Quality Control, PowerPoint, Polymers, Petroleum, R&D
Shakeel Muhammad
New Process and Technologies for Infant Nutrition, Health Care Nutrition , Instant Milk Powders
Food & Beverages
Education
University of Engineering and Technology, Lahore 1998 — 2001
Chemical Engineering, Process design and operation, A++
Uet lahore 1997 — 2001
Bachelor of Engineering (B.E.), Chemical Engineering
University of Engineering and Technology, Lahore 1997 — 2001
BSc, Chemical Engineering
Experience
Nestlé January 2014 - Present
Nestle S.A. February 2013 - Present
Nestle Pakistan August 2012 - January 2014
Nestle Pakistan Ltd September 2009 - August 2012
Nestle Pakistan Ltd June 2007 - September 2009
Nestle Pakistan Ltd January 2006 - June 2007
Nestle Pakistan Ltd January 2005 - June 2005
Nestle Pkistan Ltd September 2001 - December 2004
Skills
Project Management, Team Management, FMCG, Quality System, Change Management, Food Technology, Factory, Quality Assurance, GMP, Manufacturing, Confectionery, 5 Why, 5S, Dairy, Food, Process Engineering, Production Planning, Quality Auditing, Management, TQM, Food Science, Food Manufacturing, ISO, HACCP, Project Planning, Team Leadership, Sensory Evaluation, Leadership, Operations Management, Product Development, Problem Solving, DMAIC, Quality Management, Six Sigma, Lean Manufacturing, Dairy Products, Food Industry, ISO 22000, TPM, Ingredients, Continuous Improvement, Hygiene, Raw Materials, SAP, Cross-functional Team..., Food Safety Management..., Food Safety, Food Processing, Supply Chain
Sheharyar Saeed
Head CSC EMEA Managed Services at Giesecke & Devrient
Telecommunications
Education
Kungliga Tekniska högskolan 2010 — 2012
Master of Science (M.Sc.), Communication Systems
University of Engineering and Technology, Lahore 2004 — 2008
Bachelor of Science (B.Sc.), Electrical Engineering, Telecommunication & Electronics
Experience
Giesecke & Devrient Nordic AB October 2014 - Present
Giesecke & Devrient Nordic AB February 2014 - September 2014
Giesecke & Devrient Nordic AB December 2012 - February 2014
Ericsson April 2012 - November 2012
Motorola March 2009 - September 2010
CMPak, Pakistan December 2008 - March 2009
CMPak, Pakistan June 2007 - July 2007
Skills
Telecommunications, Cisco Technologies, IP, BGP, Microsoft Office, HTML, WiMAX, Visio, Computer Network..., Mathematica, IP Multimedia Subsystem, MPLS, GNS3, Nagios, GSM, UDP, QoS, RIP, OSPF, ISIS, Routing Protocols, Ethernet, MPLS-TP, Matlab, EMS Management, Wireshark, TCP/IP, VMware, Java, IP Multicast, MS Office, Cisco IOS, JUNOS, Eclipse, Switches, C, Linux Kernel, VoIP, Juniper
Sheheryar Hassan
Business Consultant at CGI
Utilities
Education
Middlesex University, London 2005 — 2007
MA Marketing with Economics
University of Engineering and Technology, Lahore 2001 — 2005
BSc Computer Science and Engineering
Experience
CGI May 2015 - Present
Alliance Marketing Limited June 2011 - May 2015
Shine Utilities Limited June 2010 - May 2011
Shine Utilities Limited April 2007 - May 2010
CureMD Corporation May 2005 - September 2005
Skills
Relationship Management, Business Process..., AceProject, Key Account Management, Systems Analysis, PL/SQL, Sales, SME sector, Stake Holder Management, Business Analysis, Black Box Testing, Requirements Gathering, CRM, Written Communication, Requirements Analysis, Training, Oral Communication, Business Transformation, Management, Negotiation, User Acceptance Testing, Business Workflows, Business Development, Energy Industry
Sheheryar Qureshi
Masters student seeking internship in Civil Engineering/Hydropower
Civil Engineering
Education
Grenoble INP - Ense3 2014 — 2016
Master's Degree, Hydraulics and Civil Engineering
University of Engineering and Technology, Lahore 2006 — 2010
Bachelor's Degree, Civil Engineering, A
Experience
Sinotec CO.,Ltd February 2012 - August 2014
Freelance October 2013 - July 2014
Snow Mountain Engineering Corporation (SMEC) August 2013 - July 2014
JERS ENGINEERING CONSULTANTS October 2010 - January 2012
Skills
SAP2000, Steel Structures, Project Management, HEC-RAS, Microsoft Project, Drainage, Microsoft Office, Structural Analysis, Construction, Finite Element Analysis, STAAD-Pro, Bridge, GeoStudio, Civil Engineering, ABAQUS FEA, Project Planning, ETABS, Structural Engineering, AutoCAD, PLAXIS, Concrete, CADAM, Microsoft Word
Shehzad Ali Ashraf
Master Thesis Student at Ericsson
Telecommunications
Education
RWTH Aachen 2011 — 2013
Master of Science (M.Sc.), Communications Engineering
University of Engineering and Technology, Lahore 2007 — 2011
Bachelor of Science (B.Sc.), Electrical, Electronics and Communications Engineering
Experience
Ericsson April 2013 - Present
RWTH Aachen University December 2012 - January 2013
Skills
Xilinx, PSIM, VHDL, HM 6.1 (HEVC software), Eclipse, LaTeX, Verilog, Proteus, Assembly Language, OPNET, C Language, Qt, Linux, C++ Language, Eagle, OpenCV, Altera Quartus, SPICE, Matlab, Labview
Shehzad Javed
Education
Institute of Chemical Engineering (IChemE) 2013 — 2014
Associate Member
University of Trinity Saint David 2010 — 2012
Master of Business Administration (MBA), Marketting
University of Engineering and Technology, Lahore 2002 — 2006
Bachelor's degree, Chemical Engineering
PAF Degree College 2000 — 2002
FSc, Pre-Engineering
Experience
Sitara Chemical Industries Limited October 2007 - November 2009
Sitara Chemical Industries Limited September 2006 - October 2007
Skills
Time Management, Project Planning, Factory, PowerPoint, Microsoft Office, Process Engineering, Process Simulation, Teamwork, Engineering, Process Optimization, Polymers, Chemical Engineering, Commissioning, Power Plants, DCS, Aspen Plus, Product Development, English, PFD, Pumps, SAP, Petrochemical, Process Safety, Process Control
Shoaib Awan
Lead Engineer at Jaguar Land Rover
Automotive
Education
University of Engineering and Technology, Lahore 2006 — 2008
Master of Science (MSc), Engineering Management
University of Engineering and Technology, Lahore 2000 — 2004
Bachelor of Science (BSc), Mechanical Engineering
Experience
Jaguar Land Rover March 2012 - Present
Skills
Engineering, Commissioning, Microsoft Project, Project Management, Continuous Improvement, Project Planning, Project Engineering
Shoaib Azhar
Scientist, Chemical Engineer
Research
Education
KTH Royal Institute of Technology 2009 — 2015
Doctor of Philosophy (Ph.D.), Fiber and Polymer Science
Luleå University of Technology 2005 — 2008
M.Sc, Chemical Engineering
University of Engineering and Technology, Lahore 1999 — 2003
B.Sc, Chemical Engineering
Experience
Wallenberg Wood Science Center, KTH September 2009 - March 2015
SSAB January 2009 - May 2009
Skills
Chemical Engineering, Process technology, Wood chemistry, Biomass separation, Gas Chromatography, HPLC, Liquid Chromatography, Science, Matlab, Pulp technology, Materials Science, Polymers, Carbohydrates, R&D, Ion Chromatography, Analytical Chemistry, Chemistry, Polymer Characterization, Characterization
Shoaib Javed
R&D Manager at Telegesis (UK ) ltd
Telecommunications
Education
University of Engineering and Technology, Lahore 1996 — 2000
B.Sc, Electrical Engineering
Sir Syed School, Wah Cantt 1990 — 1995
F.Sc, Engineering
Experience
Telegesis (UK ) ltd November 2011 - Present
Telegesis (UK ) ltd June 2010 - November 2011
West Instruments Ltd November 2009 - May 2010
West Control Solutions November 2009 - May 2010
Wireless Measurement Ltd September 2005 - November 2009
And-Or Logic Inc. July 2000 - May 2005
Skills
C, USB, Agile Project Management, Embedded Linux, PCB design, Sensors, Digital Signal..., ZigBee, Embedded Systems, Hardware Development, Wireless, Microchip PIC, Embedded C, Embedded Software, SPI, Team Management, Smart Metering, Xilinx, Algorithms, RS232, Software Engineering, ARM7, Low-power Design, UART, FPGA, Testing, Firmware, Bluetooth, System Architecture, Microcontrollers, RF, Resource Management, Analog, MSP430, Wireless Sensor Networks, Serial Communications, Debugging, ARM, RS485, AVR, I2C, Project Planning, RTOS, Microprocessors
Sohail Khalil
Regional Sales Manager/Sales Engineer ExHeat Ltd.
Mechanical or Industrial Engineering
Education
University of Sunderland 2007 — 2008
Master of Business Administration (M.B.A.), Business Administration and Management, General, A
University of Engineering and Technology, Lahore 1998 — 2002
BSc, Mechanical Engineering
Experience
EXHEAT November 2013 - April 2015
E-port TEchnologies December 2009 - November 2013
Flamco UK Ltd July 2006 - November 2009
Skills
Energy, Engineering, Management
Sohail Saeed
Materials & Corrosion Engineer (Technical Authority) at Chevron
Oil & Energy
Education
Henley Management College 2010 — 2013
MBA, General Management
The University of Manchester Institute of Science and Technology, UK 2005 — 2006
MSc, Corrosion Control Engineering
University of Engineering and Technology, Lahore 1995 — 2000
BSc, Mechanical Engineering
Experience
Chevron November 2012 - Present
Oceaneering July 2009 - October 2012
Oceaneering January 2008 - June 2009
Oceaneering October 2006 - December 2007
Oil & Gas Development Company Ltd. Pakistan July 2001 - October 2006
The University of Manchester 2005 - 2006
Al-Maqsoom Publishing March 2000 - July 2001
Skills
Offshore, Engineering, Petrochemical, Metallography, Piping, Pressure Vessels, Risk Management, Cathodic Protection, Onshore, FPSO, Technical Reports, Microsoft Office, Offshore Drilling, Materials, Mechanics of Materials, Pipelines, NDT, Subsea, Asset Integrity, Corrosion Engineering, Welding, ASME, Material Selection, Subsea Engineering, Oil & Gas, Coatings, Inspection, API, EPC, Oil/Gas, Failure Analysis, Corrosion, Refinery
Suleman Saleem Chaudhry
IP Planning Expert at Nokia Siemens Networks
Telecommunications
Education
Aalto-yliopisto 2009 — 2011
Masters in Communication Engineering, Networking Technology
University of Engineering and Technology, Lahore 2001 — 2004
Electrical Engineering
Experience
Nokia Siemens Networks March 2010 - Present
Nokia Siemens Networks June 2008 - March 2010
Nokia Siemens Networks May 2006 - May 2008
Nortel Networks June 2005 - May 2006
Skills
GPRS, 3G, ATM networks, IP, QoS, UMTS, NSN, MPLS, LTE, Core Network, GSM, SDH
Syed Abdul Samad
Senior iOS developer at Jongla
Computer Software
Education
Tampereen yliopisto 2010 — 2013
Master's degree, Computer Software Engineering, 3.65
University of Engineering and Technology, Lahore 2005 — 2009
Bachelor in Software Engineering, Computer Science
Experience
Jongla Oy July 2015 - Present
Meta Watch November 2013 - July 2015
Nokia June 2013 - September 2013
Tampere University of Technology September 2010 - May 2013
Cambridge Docs July 2009 - August 2010
Skills
Python, StyleCop, Statistical Data..., Java, Qt, C, Windows Phone, C++, Eclipse, C# 4.0, Combinatorics, Matlab, Xcode, Machine Learning, C#, XAML
Syed Adnan Ali
Programme Engineer at Jaguar Land Rover
Automotive
Education
University of Engineering and Technology, Lahore 2000 — 2004
BSc., Mechanical Engineering
Forman Christian College, Lahore Pakistan 1997 — 1999
FSc., Pre-Engineering
Experience
Jaguar Land Rover September 2011 - Present
Honda Atlas Cars ( Pakistan) Limited 2004 - 2009
Skills
Project Management, New Model Launch, APQP, Continuous Improvement, MS Project, Project Planning, Manufacturing..., Powertrain, Manufacturing, Microsoft Project, 5S, Pro Engineer, Lean Manufacturing, Problem Solving, Production Planning, Quality Management, Automotive, Vehicles, PPAP, Automotive Engineering, Catia, Engineering, CAD, Kaizen, Manufacturing..., CATIA
Syed Amir Ali Shah
Research Engineer at KTH Royal Institute of Technology
Oil & Energy
Education
Chalmers tekniska högskola / Chalmers University of Technology 2009 — 2012
Master's degree, Innovative and sustainable chemical engineering
University of Engineering and Technology, Lahore 2004 — 2008
Bachelor's degree, Chemical Engineering
Experience
KTH Royal Institute of Technology October 2014 - Present
Perstorp AB January 2012 - December 2012
SPEC-PRO August 2008 - September 2009
Skills
Process Simulation, Aspen Plus, Comsol Multiphysics, Simulink, Simulations, Mathematical Modeling, Optimization, Materials Science, Aspen HYSYS, Project Engineering, Matlab, Energy, Scanning Electron...
Syed Karar Hussain
Civil Engineer seeking new opportunities
Civil Engineering
Education
Czech Technical University in Prague 2013 — 2015
Master of Science (Civil Enginering), Sustainable Constructions Under Natural Hazards and Catastrophic Events, Distinction
Université de Liège 2014 — 2015
Master of Science (Civil Engineering), Sustainable Constructions under Natural Hazards and Catastrophic Events, Higher Distinction
Universitatea „Politehnica” din Timișoara 2014 — 2014
Master of Science (M.Sc.), Sustainable Constructions Under Natural Hazards and Catastrophic Events, Distiction
Université de Liège 2013 — 2014
Master's degree, Sustainable Constructions Under Natural Hazards and Catastrophic Events, Distinction
University of Engineering and Technology, Lahore 2008 — 2012
Bachelor of Science (B.Sc.), Civil Engineering, CGPA:3.526/4.000
Experience
Drever International August 2014 - September 2014
FAST-NUCES November 2012 - August 2013
University of Management and Technology September 2012 - November 2012
Skills
Road, Engineering, Geotechnical Engineering, Finite Element Analysis, Civil Engineering, Microsoft Office, Highways, Construction Management, AutoCAD, SAP2000, Drainage, Design-Build, Bridge, MS Project, ETABS, Concrete, Microsoft Excel, SeismoStruct, Construction, Project Management, Design of structures, Structural Engineering, Structural Analysis, Microsoft Project, Design builder
Syed Kashif Amjad Ali
Independent Principal Process Engineer at WorleyParsons.
Oil & Energy
Education
University of Surrey 2003 — 2005
MSc, Process & Environmental Systems Engineering
University of Engineering and Technology, Lahore 1995 — 2000
BSc., Chemical Engineering
Experience
WorleyParsons September 2014 - Present
KBR, Inc. June 2014 - September 2014
WorleyParsons September 2013 - June 2014
WorleyParsons July 2013 - September 2013
WorleyParsons, UK. February 2013 - July 2013
Petrofac October 2012 - February 2013
Petrofac August 2012 - October 2012
KBR, Inc. January 2012 - August 2012
CB&I September 2011 - January 2012
WorleyParsons, UK. September 2007 - September 2011
Skills
EPC, Process Design, Hydraulics, Process Simulation, Refinery, Control Valves, LNG, Process Safety, P&ID development, Valves, Pressure Vessels, Hydraulic Calculations, Engineering, Commissioning, Pumps, Refineries, Oil/Gas, Onshore, Calculations, Promax, Petrochemical, Offshore, Refining, Chemical Engineering, Columns, Pipelines, Process Engineering, Petroleum, Engineering Design, Offshore Drilling, Aspen HYSYS, FPSO, Equipment Sizing, Gas, P&ID, Sizing, Plant Design, Detail Engineering, PFD, Tanks, HAZOP, FEED, Factory, Oil&Gas, Gas Processing, GTL, Data Sheets, SIL, Flarenet, Heat Exchangers
Syed Murtaza Abbas Zaidi
Civil & Structural Engineer II at CB&I
Civil Engineering
Education
University of Engineering and Technology, Lahore 2007 — 2011
Bachelor of Science (B.Sc.), Civil Engineering, A+
Beaconhouse Defence Campus 2005 — 2007
Advanced levels (GCE Cambridge University Board), Pre-Engineering & Pre-Medical, 4A's
Beaconhouse Defence Campus 2004 — 2007
Ordinary Level (GCE Cambridge University), Sciences, 8A's
Experience
Chicago Bridge & Iron Nederland B.V September 2011 - Present
Chicago Bridge & Iron July 2013 - February 2014
CB&I October 2012 - July 2013
CB&I (Chicago Bridge & Iron Company N.V.) February 2012 - August 2012
CB&I (Chicago Bridge & Iron Company N.V.) September 2011 - February 2012
Project Management Unit (PMU), Government of Punjab June 2010 - August 2010
Pakistan Railways, Directorate of Bridge Rehabilitation June 2009 - July 2009
Skills
Offshore Oil & Gas, Materials, Bridge, Engineering, Construction, Project Engineering, PDMS, PDS Frameworks, Microstation, Instrumentation, Steel Structures, Offshore Drilling, Procurement, Tanks, Offshore Construction, Database Administration, Petrochemical, Pumps, Refinery, Structural Analysis, Piping, SAP2000, PDS, Inspection, Structural Engineering, AutoCAD, Project Management, EPC, Project Control, FEED, Database Design, Microsoft Office, Welding, Metal Fabrication, LNG, Onshore, STAAD
Syed Nabeel Hasan Jafri
Civil and Structural Engineering
Civil Engineering
Education
The University of Sheffield 2008 — 2009
MSc, Structural Engineering
University of Brighton 2007 — 2008
PG. cert, Civil Engineering
University of Engineering and Technology, Lahore 2003 — 2007
BSc, Civil Engineering
Garrison Science Degree College Lahore 2000 — 2002
HSSC (Higher Secondary School Certificate, Pre-Engineering Science Subjects
Ibne-Sina College Lahore 1998 — 2000
SSC (Secondary School Certificate), Matriculation in Science Subjects
Syed Najaf Sajjad
Planning & Control Engineer, BSc. Mechanical, PMP, MBA
Oil & Energy
Education
SZABIST, Dubai International Academic City 2010 — 2013
MBA, Strategic Management
University of Engineering and Technology, Lahore 2000 — 2004
B.E, Mechanical Engineering
Experience
GE Oil & Gas July 2013 - Present
Tecnoconsult International UK (Ltd.) Abu Dhabi Branch May 2010 - July 2013
Topaz Group of Companies February 2008 - April 2010
Descon Engineering Qatar L.L.C June 2006 - December 2007
Aghas International Pvt. Ltd, Pakistan June 2004 - May 2006
Skills
Project Engineering, FEED, Onshore, Construction, Primavera P6, Commissioning, P&ID, Project Control, Earned Value Management, Oil, Project Planning, Instrumentation, Energy Industry, Onshore and Offshore..., Refinery, Pipelines, Oil & Gas, Control Theory, Pumps, Microsoft Project, Engineering, Procurement, EOT Claims, Detail Engineering, Project Management, Petroleum, MS Project, HAZOP, Piping, Project Estimation, Variations Control, Oil/Gas, LNG, WBS, Gas, Metal Fabrication, Petrochemical, Construction,..., Primavera, Progress Reports, EPC
Syed Talal Hussain
Mechanical engineer
Mechanical or Industrial Engineering
Education
University of Engineering and Technology, Lahore
Tahir Ajmal
Team Lead (R&D Xray) at SensTech
Design
Education
Imperial College London 2001 — 2005
MEng (Hons) ACGI
Westminster College, London 2000 — 2001
A Levels
University of Engineering and Technology, Lahore 1999 — 2000
BSc (Electrical Engineering)
Government College University, Lahore 1996 — 1998
F.Sc. (Pre-Engineering)
Nusrat Jehan Academy 1991 — 1996
Matriculation (SSC)
Experience
Humanity First UK December 2009 - Present
Sens-Tech April 2007 - Present
Electron Tubes August 2005 - April 2007
Electron Tubes June 2004 - October 2004
Viglen March 2000 - October 2000
Skills
Electronics, C, Manufacturing, Protel, Microcontrollers, Team Leadership, X-ray, Power Supplies, Sensors, FPGA, Customer Relations, Team Coordination, Xilinx, VHDL, Testing, Mixed Signal, Analog Circuit Design, R&D, Matlab, Test Equipment, Digital Design, Python, PCB Design, Supply Management, Supplier Management, PCB design, Analog Design, Labview, LabVIEW, Project Management, Hardware
Tahir Asif
Student at Glasgow Caledonian University,Glasgow(UK)
Mechanical or Industrial Engineering
Education
Glasgow Caledonian University 2012 — 2013
Master of Science (MSc), Mechanical and Manufacturing, 1st Class
University of Engineering and Technology, Lahore 2007 — 2011
Bachelor of Science (BSc), Mechanical Engineering
Experience
Ministry of Science and Technology March 2014 - Present
Pepsi June 2011 - November 2011
Descon Integrated Projects pvt Limited June 2010 - July 2010
Skills
Project Engineering, AutoCAD, Project Planning, Solidworks, Manufacturing, Solid Edge, MS Project, C++, PLC, ANSYS, Engineering, Mechanical Engineering, CAD, Pro Engineer, Matlab
Tahir Naveed
EPiServer consultant at The Share Centre
Computer Software
Education
University of Engineering and Technology, Lahore 1999 — 2003
BS(Hons), Computer sciences
Experience
The Share Centre December 2013 - Present
Netcel April 2010 - December 2013
Danske Friferie February 2008 - October 2009
Talented Earth Organization July 2007 - February 2008
NESCOM 2004 - 2007
Skills
Visual Studio, C#, Scrum, JavaScript, Enterprise Library, EPiServer, WinForms, SQL, ASP.NET MVC, Internet Information..., NUnit, VSS, Design Patterns, jQuery, XML, Architecture, Web Development, Subversion, MVC, ADO.NET, Git, ASP.NET AJAX, Software Design, Microsoft .Net, T-SQL, AJAX, TFS, SQL Server 2005/2008, IIS, Github, JSON, SOA, XSLT, Entity Framework, LINQ, Web Applications, Sitecore, ASP.NET, Microsoft SQL Server, .NET, WCF, ASP, EPiServer 7, Software Development, Test Driven Development, CMS
Talha Zafar
Student at Politecnico di Torino
Automotive
Education
Politecnico di Milano 2013 — 2015
Masters in Management Engineering
Politecnico di Torino 2009 — 2013
BS, Automotive Engineering, 102/110
University of Engineering and Technology, Lahore 2008 — 2009
Tariq Bashir
Researcher at University College of Borås
Higher Education
Education
Chalmers University of Technology 2009 — 2014
Doctor of Philosophy (Ph.D.), Material Sciences / Polymer Technology
University of Engineering and Technology, Lahore 2006 — 2008
Master of Science (M.Sc.), Polymer and Process Engineering, A
University of Engineering and Technology, Lahore 2002 — 2005
Bachelor of Science (B.Sc.), Chemical (Polymer) Engineering, A
Experience
University College of Borås April 2013 - Present
University of Engineering and Technology, Lahore, Pakistan December 2012 - Present
Chalmers University of Technology April 2009 - March 2013
SP Technical Research Institute of Sweden June 2011 - September 2011
University of Engineering and Technology, Lahore February 2006 - March 2009
Skills
Materials, Computed Tomography, Aspen HYSYS, Characterization, Polymer Characterization, ATR-FTIR, Teaching, Composites, Powder X-ray Diffraction, Nanotechnology, Rheology, Labview, Differential Scanning..., TGA, Nanomaterials, GPC, AFM, Polymers, Polymer Chemistry, Photovoltaics, Smart Textiles, Process Engineering, Thermodynamics, LabVIEW, Coatings, TEM, Organic Chemistry, Materials Science, Scanning Electron..., Chemical Engineering, Polymer Composites, Surface Chemistry, XPS, Polymer Science
Tariq Dr-Engr Malik
Business Development & Industrial Engineering Advisor
International Trade and Development
Education
Technische Universität Bergakademie Freiberg 1980 — 1984
Dr Engineer, Materials Science, Magna Cum Laude
University of Engineering and Technology, Lahore 1970 — 1975
B.Sc Engr, Metallurgy & Materials Sciences
DAWOOD COLLEGE OF ENGINEERING AND TECHNOLOGY KARACHI 1969 — 1970
B.Sc. Engineering ( FIRST YEAR), GENERAL ENGINEERING
GOVERNMENT COLLEGE LAHORE, PUNJAB UNIVERSITY, PAKISTAN 1967 — 1969
F.Sc., Pre-Engineering, FIRST CLASS
Experience
TM-INTERNATIONAL CONSULTING (owner) April 2011 - Present
Peguform GmbH, Polytec Group January 1997 - March 2011
Peguform 1995 - March 2011
Alcatel-Lucent RFS Trignac March 1991 - November 1994
University of Engineering and Technology Lahore October 1975 - December 1990
Peguform France 1985 - 1987
Skills
Business Strategy, Materials Science, Operations Management, Project Management, Six Sigma, ENGLISH, R&D, Program Management, Procurement, Quality Management, Cross-functional Team..., Injection Molding, Sales Management, Automotive, URDOU / HINDI SPEAKING, German, Materials, Lean Manufacturing, Business Development, Process Engineering, Product Development, Engineering, Negotiation, Continuous Improvement, Purchasing, Manufacturing, Change Management, INDUSTRAIL ENGINEERING, Metallurgy
Tariq Mahmood
Voip Network Engineer at Virgin Media
Telecommunications
Education
University of Engineering and Technology, Lahore 1984 — 1991
Bachelor of Science (B.S.), Electrical, Electronics and Communications Engineering
Islamabad college for boys G 6/4 1982 — 1984
FSc, Engineering
F G Public School Quetta Cantt 1980 — 1982
Matriculation, Science
tennis
Experience
Virgin Media September 2015 - Present
Telefónica UK July 2013 - August 2015
H3G December 2012 - June 2013
Ericsson September 2012 - December 2012
CTS (Gibraltar) Ltd April 2012 - August 2012
Everything Everywhere Ltd August 2007 - March 2012
T-Mobile August 2005 - July 2007
Orange December 2000 - December 2004
Cisco Systems 2000 - 2000
Alcatel UAE 1999 - 2000
Skills
IP, 3G, IMS DB/DC, LTE, Telco, Femtocell, Computer Network..., SMS, QC 10.00, Service Design, Test Driven Development, Testing, Handsets, TCP/IP, RADIUS, ISUP, Optimization, SS7, HTTP, Red Hat Linux, UMTS, INAP, NGN, LCS (Location Services), Integration, Cisco CME, Charging, CAMEL, OCS, Mobile Devices, 3GPP, VPN, SIP, MAP, VAS, Diameter, Deep Packet Inspection, IMS, SIGTRAN, MLP (Mobile Location..., F5 BigIP, Routing, SaaS, Cisco VoIP, GPRS, GSM, 3DS, Cisco Call Manager
Tauqeer Iqbal
European masters in material science engineering
Mechanical or Industrial Engineering
Education
Universite catholique de louvain(UCL) 2011 — 2012
European masters in chemical and material science engineering, Chemical and materials Engineering
Universidad de Huelva 2010 — 2011
European masters in engineering rheology, Materials Engineering
University of Engineering and Technology, Lahore 2005 — 2009
Bachelor's degree, Mechanical Engineering
Experience
University of Central Punjab August 2012 - Present
Université catholique de Louvain September 2011 - June 2012
Water and power Development Authority Pakistan 2009 - 2010
Skills
Maintenance & Repair, AutoCAD Mechanical, Mechanical Engineering, Soft matter science, Pumps, Materials, Gas, Thermal Power Plant, Rheology, Materials Science, Power Plants, Simulations, OriginLab, Characterization, Chemical Engineering, Maintenance, materials...
Tayyab Naseer
Doctoral Candidate at Albert Ludwigs University of Freiburg, Germany
Electrical/Electronic Manufacturing
Education
Technische Universität München 2010 — 2012
MSc, Communication Systems Engineering
University of Engineering and Technology, Lahore 2005 — 2009
Bsc Hons, Electrical Engineering
Experience
Albert-Ludwigs-Universität Freiburg im Breisgau April 2013 - Present
DoCoMo Euro-Labs May 2011 - March 2013
Technische Universität München April 2012 - August 2012
Technische Universität München November 2010 - April 2011
Lahore University of Management Sciences August 2009 - September 2010
Al-Khawarizmi Institute of Computer Sciences, UET Lahore July 2008 - August 2008
AKSA group July 2007 - August 2007
Skills
Machine Learning, Artificial Intelligence, Orcad, LTE, Image Processing, Pattern Recognition, LaTeX, Simulations, C, OrCAD, VHDL, PCB Design, Microcontrollers, FPGA, PCB design, Wireless Sensor Networks, Digital Image Processing, Verilog, Digital Signal..., OpenCV, Sensors, Simulink, Embedded Systems, Pspice, Signal Processing, Matlab, Robotics, Java, Computer Vision, Labview, C++, LabVIEW, Xilinx, Algorithms, Digital Signal...
USMAN BAJWA
Process Engineer
Oil & Energy
Education
University of Greenwich 2009 — 2010
MSc, Engineering
University of Engineering and Technology, Lahore 2002 — 2006
BSc, Chemical Engineering
Experience
Independent April 2012 - Present
MEP Ltd, UK March 2010 - September 2010
Descon Engineering 2005 - 2009
Skills
Aspen HYSYS
Ubaid Khalid
Materials Engineer at Fibre Craft Industries
Plastics
Education
University of Bayreuth 2012 — 2013
Master of Science (M.Sc.), Plastics and Polymer Engineering Technology/Technician
Fachhochschule Aalen 2011 — 2013
Master of Science (M.Sc.), Plastics and Polymer Engineering Technology/Technician, A
University of Engineering and Technology, Lahore 2006 — 2010
Bachelor of Science (B.Sc.), Polymer/Plastics Engineering, A
FC College Lahore
Experience
FIbre Craft Industries May 2013 - Present
University of Bayreuth August 2012 - Present
UET Lahore 2006 - 2010
Packages Limited June 2009 - July 2009
Rupali Polyester Limited July 2008 - August 2008
Skills
Materials, Plastic Extrusion, Manufacturing, German, Polymer Characterization, Polymers, Injection Molding, OriginLab, Microsoft Office, Unigraphics, Microsoft Word, Moldflow, Research, Engineering, Plastics, English, Teamwork, Matlab, Composites, Molding, Materials Science
Umair Ahmad
Associate Consultant Risk & Compliance Specialist (Banking & Financial Services Division) at Antal International
Management Consulting
Education
The University of Dundee 2010 — 2011
Master of Science (MSc), International Business
University of Engineering and Technology, Lahore 2004 — 2008
Bachelor of Science (BSc), Mechatronics, Robotics, and Automation Engineering
Experience
Antal International February 2015 - Present
UV Business Development Ltd May 2013 - February 2015
REED April 2012 - May 2013
Self Employed with Unik Corporation May 2011 - April 2012
VISION TELECOM (PVT) LTD February 2011 - May 2011
Primark Stores Ltd March 2010 - March 2011
Spectrum Chemicals September 2008 - December 2009
Skills
Account Management, International Business, Negotiation, New Business Development, Sales, B2B, B2B services, CRM, Business Management, Strategy, Microsoft Office, Team Management, B2C marketing, Customer Service, Attention To Detail, Team Leadership, Leadership Development, Analysis, Sales Management, MS Office Suite, Contract Negotiation, Fluid Sim, Market Research, Team Building, Teamwork, Project Management, Marketing, Sales Operations, Business Development, Time Management, Direct Sales, Languages, Personal Development, Retail, AutoCAD, B2B Marketing, Solid Edge, Attendance, Attitude, Business Planning, Sales Support, Proteus, Recruiting, Customer Relations, Small Business..., Marketing Strategy, Training, Management, Business Strategy, Public Relations
Umair Asim
Site Engineer at Balfour Beatty Utilities
Utilities
Education
University of Engineering and Technology, Lahore 2002 — 2005
Bachelor of Science (BSc), Electrical and Electronics Engineering
Experience
Balfour Beatty Utilities April 2012 - Present
National Transmission and Despatch Company March 2008 - November 2011
Siemens Energy February 2006 - February 2008
Umair Nazir, FRM
VP Portfolio Management at Barclays
Banking
Education
Manchester Business School, University of Manchester 2009 — 2010
MSc, Quantitative Finance; Financial Engineering
University of Engineering and Technology, Lahore 2005 — 2009
BSc, Electrical Engineering
Aitchison College, Lahore
Experience
Barclays May 2015 - Present
Barclays September 2012 - April 2015
Barclays Corporate September 2011 - September 2012
Manchester Metropolitan University June 2010 - July 2010
Linguahome Learning Centre January 2008 - June 2009
Siemens July 2008 - August 2008
KSB Pumps Company Limited - Pakistan June 2004 - July 2004
Skills
C, Market Risk, Risk Analysis, Excel, Visio, Risk Management, Microsoft Excel, VBA, Trade Finance, C++, Databases, Access, Financial Risk, Credit Risk, Basel II, Project Management, English, Derivatives, Banking, Corporate Finance, Project Planning, Portfolio Management, Credit Analysis
Umar Muhammad
Software Applications Engineer at Sony
Computer Software
Education
University of Engineering and Technology, Lahore 2002 — 2006
BSc (Hons) Computer Science & Engineering, First Class Honours (1st)
Experience
PaymentSense May 2014 - Present
Sony Europe Limited (Semiconductor Development Centre) February 2012 - May 2014
Meta Vision Systems Ltd November 2009 - February 2012
Mentor Graphics June 2005 - October 2009
Skills
Firmware, Digital Signal..., Software Engineering, Device Drivers, FPGA, RTOS, Software Development, Linux, Debugging, Embedded Systems, ARM, Embedded Software, Microcontrollers, C++, USB, Sensors
Umar Sattar
Senior Radio Engineer at O2 (Telefónica UK)
Information Technology and Services
Education
University of Engineering and Technology, Lahore
Experience
O2 (Telefónica UK) July 2015 - Present
Oracle July 2013 - June 2015
Skills
Business Analysis, System Administration, Network Design, Wireless, GSM, LTE, Integration, Telecommunications, Management, BSS, SQL, Project Planning, Project Management, Diameter, Team Leadership, IP, SCTP, IT Strategy, Linux, Team Management
Umer Ilyas
Scientific Researcher at German Aerospace Center
Mechanical or Industrial Engineering
Education
Ruhr University Bochum 2015 — 2018
Doctor of Philosophy (Ph.D.), Mechanical Engineering
Ruhr-Universität Bochum 2011 — 2014
Master's Degree, Mechanical Engineering
University of Engineering and Technology, Lahore 2005 — 2009
Bachelor's Degree, Mechanical Engineering
Experience
German Aerospace Center December 2014 - Present
Ruhr-Universität Bochum October 2013 - September 2014
Packages Limited October 2009 - September 2010
Honda Atlas Cars ( Pakistan) Limited August 2007 - August 2007
Skills
Programming, Manufacturing, Materials, AutoCAD, Mechanical Engineering, Solidworks, Materials Science, Analysis, Engineering, Matlab, ANSYS
Umer Javaid
Information Technology and Services Professional
Information Technology and Services
Education
Bonn Rhein Sieg University of Applied Sciences, Sankt Augustin 2010 — 2013
Master's degree of Science, Information Technology (IT) and Autonomous Systems
University of Engineering and Technology, Lahore 2005 — 2009
Bachelor's degree, Mechanical Engineering with specialization in Computer Aided Software Development
Experience
Rhenag January 2013 - Present
Hochsuchle Bonn Rhein Sieg, University of Applied Sciences February 2012 - April 2013
Internetone AG April 2012 - December 2012
Deutsche Luft Raum Fahrt (DLR) March 2011 - February 2012
Hochsuchle Bonn Rhein Sieg September 2010 - April 2011
Skills
C++, .NET, Machine Learning, ASP.NET MVC, Matlab, Algorithms, Microsoft SQL Server, NHibernate, Oracle, Robotics, LaTeX, JavaScript, Phython, Computer Vision, C#
Umer Nawaz
Electrical (Power) Engineer
Electrical/Electronic Manufacturing
Education
Fachhochschule Darmstadt 2010 — 2013
Master's degree
University of Engineering and Technology, Lahore 2004 — 2008
Bachelor's degree
Experience
ABB November 2012 - April 2013
ABB September 2012 - October 2012
Siemens January 2009 - March 2010
SMJ June 2008 - December 2008
Skills
Pro Engineer, C++ Language, Product Offerings, Circuit Breakers, Product Design, Testing, Electrical Engineering, Requirements Analysis, High Voltage, Technical Product Sales, Protective Relays, Measurement Tools, Product Development, Project Management, Tender Offers, SAP, Matlab, Power Systems, GIS, Medium Voltage, Electromagnetic..., Eagle PCB, Borland Together, Product Marketing, Equipment Installation, Simulations, SCADA, Java, PCB design, FEM analysis, Research, Switchgear, Eclipse, Commissioning, Product Management, Transformer, AutoCAD, C#, Engineering, Low Voltage, Microsoft Office, Simulink
Umer Saleem
Student at Glasgow Caledonian University
Mechanical or Industrial Engineering
Education
Glasgow Caledonian University 2012 — 2013
MSc, Mechanical and Manufacturing Engineering
University of Engineering and Technology, Lahore 2007 — 2011
BSc, Mechanical Engineering
Experience
M.A.INTERNATIONAL March 2012 - Present
Descon Engineering February 2011 - August 2011
Descon Engineering July 2010 - September 2010
Kohinoor Mills Limited June 2010 - July 2010
C.a textile mills private limited August 2009 - September 2009
National Productivity Organization July 2009 - August 2009
Pakistan Railways Lahore June 2009 - July 2009
Skills
jaf, Primavera P6, Web Development, Compress, Matlab, Aspen HYSYS, AutoCAD Mechanical, C++, HTML, COMPRESS(Heat Exchanger..., Payroll, Primavera, Painting, Phoenix, Solid Edge, Aspen, Microsoft Office, Sage Line50, Web Design, PowerPoint, Minitab
Usman Afzal
Premier Field Engineer [MSFT] SharePoint/O365/Microsoft Azure
Information Technology and Services
Education
KTH Royal Institute of Technology 2009 — 2012
Master's, Software Engineering of Distributed Systems
University of Engineering and Technology, Lahore 2003 — 2007
BS in Computer Science and Engineering, Computer Science and Electronics, CGPA 3.3
Govt. College of Science 2000 — 2002
High School, Engineering, A+
Experience
Microsoft March 2013 - Present
CGI November 2010 - February 2013
KTH January 2012 - January 2013
Logica AB November 2010 - November 2012
bytebeats.com August 2010 - August 2011
Avanceon August 2007 - July 2009
Rapid Soft Solutions January 2006 - January 2007
Skills
XSLT, Web Services, Microsoft SQL Server, ASP.NET AJAX, SQL, Software Development, Scrum, Web Applications, Silverlight, SharePoint Designer, jQuery, Programming, Solution Architecture, ASP.NET, Agile Modeling, WCF, ASP.NET MVC, VB.NET, Social Media, Entity Framework, Software Engineering, SSRS, LINQ, Microsoft Office..., TFS, WPF, SharePoint, SQL Server, Requirements Analysis, SharePoint Server, XML, Agile Methodologies, UML, IIS, Visual Studio, Software Solution..., SSIS, AJAX, .NET, C#, JavaScript, .NET Compact Framework
Usman Bashir
Senior Big Data Analyst / Developer
Oil & Energy
Education
University of Sussex 2004 — 2005
Master of Science (MS), Artificial Intelligence, 70%
University of Engineering and Technology, Lahore 1999 — 2002
Bachelor of Science (BSc), Electrical and Computer Engineering, First
Experience
BP June 2014 - Present
BP June 2014 - Present
BP September 2013 - May 2014
Ocado September 2008 - August 2013
Accenture June 2006 - September 2008
UBS 2007 - 2008
Techlogix 2003 - 2004
Skills
Oracle, TSP, Scrum, Swarm Intelligence, Java, Orchestration, Mercurial, SQL, Big Data, Test Driven Development, Linux, XML, HBase, Lin Kernighan Algorithm, JIRA, Java Enterprise Edition, Maven, Kanban, C++, Subversion, C#, Business Analysis, MapReduce, Software Development, Jenkins, Client Relations Skills, Hive, Agile Methodologies, JUnit
Uzair Javaid
Doctoral Assistant at EPFL
Electrical/Electronic Manufacturing
Education
Ecole polytechnique fédérale de Lausanne 2014 — 2018
Doctor of Philosophy (Ph.D.), Power Electronics
Ecole polytechnique fédérale de Lausanne 2011 — 2013
Master's degree, Energy Management and Sustainability, 5.1/6.0
University of Engineering and Technology, Lahore 2006 — 2010
Electrical, Power, 3.693/4.0
Experience
Ecole Polytechnique Fédérale de Lausanne (EPFL) April 2014 - Present
Ecole Polytechnique Fédérale de Lausanne (EPFL) January 2014 - March 2014
CSEM-UAE INNOVATION CENTER L.L.C January 2013 - March 2013
Lahore University of Management Sciences October 2010 - August 2011
Pak Elektron Limited July 2009 - August 2009
Worldcall Telecom Limited July 2008 - August 2008
Skills
LaTeX, Power Electronics, Matlab, Simulations, Energy, Electronics, Electrical Engineering, Microcontrollers, FPGA, Verilog, Labview, Renewable Energy, Xilinx, Solar Energy, C, VHDL, Simulink, Signal Processing, ModelSim, Power Systems, Automation
Wahab Ahmed
Senior Reservoir Engineer
Oil & Energy
Education
Heriot-Watt University 2007 — 2008
MSc, Reservoir Evaluation and Management
University of Engineering and Technology, Lahore 2000 — 2003
BSc, Petroleum Engineering
Experience
Axis Well Technology October 2014 - Present
Schlumberger Information Solutions October 2013 - October 2014
Schlumberger Information Solutions July 2009 - September 2013
Eni Pakistan Ltd January 2004 - September 2007
Skills
Oil/Gas, Reservoir Engineering, Eclipse, Petroleum Engineering, GAP, Production Technology, Petroleum, Reservoir Simulation, Petrel, Uncertainty Analysis, Product Optimization, Onshore, Production Optimization, Gas, Drilling Engineering, Formation Evaluation, Drilling, MBAL, Reserves, Prosper, Field Development, Well Testing, Petroleum Economics, Petrophysics, Directional Drilling, Reservoir Management, Production Forecasting
Waheed Lateef
Petroleum Engineer
Oil & Energy
Education
Politecnico di Torino
Master's Degree, Petroleum Engineering
University of Engineering and Technology, Lahore
Bachelor's Degree, Petroleum and Gas Engineering
Experience
Oil and Gas Development Company Limited, Pakistan April 2011 - May 2011
Weatherford October 2010 - November 2010
Oil and Gas Development Company Limited, Pakistan June 2010 - July 2010
Skills
Microsoft Office, Decline Curve Analysis, Petrel, Material Balance, Eclipse
Yasar Hayat
Construction Project Mnagement | Planning & Scheduling | Quality Assurance & Control
Construction
Education
Sheffield Hallam University 2006 — 2007
Masters in Construction Management, Construction Management
University of Engineering and Technology, Lahore 2000 — 2003
Bachelor of Science (BSc), Civil Engineering
Skills
Primavera P6, P6, Engineering, Project Estimation, Civil Engineering, Construction Management, Microsoft Project, Concrete, Project Control, Cost Engineering, MS Project, WBS, Quality Assurance, Project Planning, AutoCAD, P3, Progress Monitoring, Earned Value Management, Quality Control, Highways, CPM Scheduling, Construction
Zaheer Ahmad Mansoor
Chemical Engineer/Researcher
Chemicals
Education
Kungliga tekniska högskolan / KTH Royal Institute of Technology 2009 — 2012
M.Sc, Chemical Engineering (Material Sciences)
University of Engineering and Technology, Lahore 2003 — 2007
B.Sc, Chemical Engineering (Polymer)
Nusrat Jahan Inter College 2001 — 2003
F.Sc, Pre-Engineering
Experience
Re:newcell AB June 2015 - Present
KTH Royal Institute of Technology June 2013 - May 2015
Packages Limited April 2008 - August 2009
Skills
Materials Science, Chemistry, Materials, Analysis, Polymer Characterization, Polymers, R&D, Chemical Engineering, Characterization, Product Development, Microsoft Office
Zaheer Sheikh
Senior Operational Tools Specialist at National Grid
Utilities
Education
University of Bath, UK. 2008 — 2010
Post Grad Diploma, Power Systems
University of Engineering and Technology, Lahore 1991 — 1996
B. Sc (Hons), Electrical Engineering
Experience
National Grid 2007 - Present
Canada 2003 - 2007
Hitachi Nichmen JV 2000 - 2003
Siemens 1996 - 2000
Skills
PowerFactory, AutoCAD, Power Transmission, Visio, Python, C++ Language, Power Generation, Visual Basic 2010, Embedded Software, DSA Tools by PowerTech,..., Scripting, SIMATIC, SLDs, Electrical Engineering, High Voltage, Power Network analysis..., Renewable Energy, Power Network Modelling, Power Systems, Power Distribution, Substation, SCADA, PRINCE2, Electricity, Green Engineering, DOS/ X Windows, Energy, Solaris, PERL, Project execution, Software..., Smart Grid, GE XA/21 EMS system, Electric Power, National Grid..., Data Historian by Instep, Basic ORACLE DBA, Linux
Zahid Anwar
Assistant Professor UET Lahore Pakistan.
Mechanical or Industrial Engineering
Education
Kungliga tekniska högskolan 2008 — 2010
Masters, Energy Engineering
University of Engineering and Technology, Lahore 2002 — 2006
BSc, Mechanical Engineering
Experience
University of Engineering and Technology Lahore, Pakistan January 2015 - Present
Royal Institute of Technology (KTH) January 2011 - December 2014
Royal Institute of Technology September 2008 - November 2010
University of Engineering and Technology Lahore January 2007 - September 2008
University of Engineering and Technology Lahore, Pakistan January 2008 - August 2008
Skills
EES, Renewable Energy, Microsoft Office, Simulations, Engineering, Mechanical Engineering, Energy, Heat Transfer, Solid Edge, Thermodynamics, Microsoft Visio, Energy Efficiency, AutoCAD, Finite Element Analysis, Visio, Modeling, COMSOL, Materials Science, Power Generation, Engineering equation..., Autocad, Fluid Mechanics, REFPROP, Fortran, Pro Engineer, ANSYS
Zahoor Mohi-u-din
Elektrotechnik Ingenieur
Electrical/Electronic Manufacturing
Education
fh kiel 2011 — 2013
Master, Wind Engineering, 2,0
University of Engineering and Technology, Lahore 2006 — 2010
Bachelor's degree, Electrical Engineering, 2,69
Experience
Ramboll Management Consulting July 2013 - December 2013
Skills
Engineering, Programming Languages, C, Matlab, C++, WindPro, Python, PLC Programming, PLC-Programmierung, Abaqus, Verilog, Simulink, WindFarmer, Electronics, Project Management, x86 Assembly, Microsoft Office
Zain Ul-Abedin
Commissioning lead WSC/BOP at Alstom Power
Construction
Education
University of Engineering and Technology, Lahore 2005 — 2009
Bachelor's degree, Mechanical Engineering
Stanford University
Project Management Mastery, Project Management
Experience
Alstom Power July 2014 - Present
Alstom Power September 2009 - June 2014
Oil & Gas Development Company Ltd. Pakistan June 2008 - June 2008
JGC-Descon Engg. Pvt. Ltd. July 2007 - July 2007
Skills
Combined Cycle, Microsoft Project, Project Management, Power Generation, Power Plants, Power Plants..., Instrumentation and..., Problem Analysis, Commissioning, Process Improvement, Microsoft Office, Oil fired power plants
Zakria Choudhry
Operations & Projects Manager at Ecowelle
Mechanical or Industrial Engineering
Education
University of Engineering and Technology, Lahore 2000 — 2003
Bachelor's degree, Mechanical Engineering, 1st Div
ABBE UK
Diploma in Energy Auditing, Energy Auditing- Built Environment
Oxf
West London Training Instituite
Diploma in Gas Engineering & Applications, Gas Engineering Applications
Experience
Ecowelle October 2010 - Present
HCI Engineering August 2007 - August 2010
Aldershot Equistrians January 2006 - June 2007
Skills
RdSAP Methodology, Gas Operations, Project Management, Designing and..., Energy Efficiency, Energy Audits, Boilers 2MW, Industrial Gas Heating..., AutoCAD 2010, Air Heaters, Onsite Management, Site Inspections, Mechanical Operations, Design and Development..., Water Heaters 2MW, Man Machine Management, Combustion Travelling..., Product Development, SBEM Methodology, Tube Heaters, Designing, Development,...
Zeshan Ahmad, PhD
Postdoctoral Researcher at University of Genoa
Mechanical or Industrial Engineering
Education
Università degli Studi di Genova 2011 — 2014
Doctor of Philosophy (PhD), Mechanical Engineering
Hanyang University 2008 — 2010
Master's degree, Mechanical Engineering, A
University of Engineering and Technology, Lahore 2002 — 2006
Bachelor's degree, Mechanical Engineering, A
Experience
University of Genoa April 2014 - Present
University of Genoa January 2011 - March 2014
GIK 2010 - 2011
Hanyang University 2008 - 2010
R & D Organization 2007 - 2008
Kohinoor Energy Limited (KEL) 2006 - 2007
Skills
Matlab, Numerical Analysis, ANSYS, Nastran, Hypermesh, Physics, Flexible Manufacturing, AutoCAD, Analysis, Structural Optimization, Engineering, PTC Creo, Structural Analysis, MSC.Patran, Finite Element Analysis, R&D, Genesis, Simulations, Microsoft Office, Research, Pro Engineer, Mechanical Product..., Patran, Solid Edge
Zia Qureshi
Freelance Project Management Consultant
Construction
Education
Cranfield University - Cranfield School of Management 2006 — 2007
MBA, Project Management
University of Engineering and Technology, Lahore 1988 — 1994
BSc, Civil Engineering
Government College University, Lahore 1985 — 1987
Intermediate (FSc), Science Group, A
Aitchison College, Lahore 1975 — 1985
Matriculation, Science Group
Experience
Freelance June 2012 - Present
Basi Construction Ltd. September 2011 - June 2012
Mace Group September 2007 - February 2010
Skills
MS Project, Civil Engineering, Project Planning, Project Control, Primavera P6, Concrete, Program Management, Project Estimation, Quality Management, Purchasing, Subcontracting, Project Management, Team Leadership, Management, Contract Management, AutoCAD, Construction, Contractors
Zubair Aslam
Research Assistant at Fraunhofer ISE
Mechanical or Industrial Engineering
Education
Technical University of Munich 2012 — 2015
Masters, Masters in Power Engineering
University of Engineering and Technology, Lahore 2006 — 2010
BSc Mechanical Engineering, Mechanical Engineering
Punjab College of Science, Lahore 2004 — 2006
FSc (Intermediate), Pre Engineering
Experience
Fraunhofer ISE April 2014 - February 2015
SNGPL May 2012 - September 2012
Emerson, Pakistan (Sumico Technologies Pvt Ltd) January 2011 - January 2012
Millat Equipment Limited August 2009 - August 2009
Engro Foods Limited June 2009 - July 2009
Skills
Rotating Equipment, Statistical Tools, Air Compressors, Condition Monitoring, RCM, Reliability Engineering, Solid Edge, Pumps, Gas Turbines, Turbines, Project Engineering, Engineering, Preventive Maintenance, Thermal Imaging, AutoCAD, Inspection, Dynamic Balancing, Lubrication, 3D CAD CAM, Laser Alignment, Predictive Maintenance
adnan waheed
Assistant Professor at FASTNUCES
Defense & Space
Education
Linköping University 2007 — 2010
Master of Science (MS), Computer System Engineering
University of Engineering and Technology, Lahore 2002 — 2006
Bachelor of Science (BS), Computer Science
Experience
FAST-NUCES August 2012 - Present
Lahore Garrison University August 2011 - August 2012
EADS September 2010 - February 2011
Linköping University March 2010 - August 2010
Skills
Simulations, Linux, Networking, Real Time System Design, Programming, C++, C, C#, Algorithms, Operating Systems, Java, Network Security, Software Engineering, Distributed Systems, Computer Science, Software Development, Systems Engineering
ali mujtaba
Intern at Bosch Power Tec
Research
Education
Universität Paderborn
Masters, Electrical and Electronics Engineering
University of Engineering and Technology, Lahore 2008 — 2012
Bachelors of Science, electrical engineering
Experience
Bosch Power Tec October 2014 - February 2015
Sinotech Engineering Services, Ltd. October 2012 - March 2013
NTDC June 2011 - July 2011
Skills
Human Relationship, Electrical Engineering, Matlab, Power Electronics, Simulink, Embedded Systems, Pspice, PLC, Labview, Electronics, C, Microcontrollers, Verilog, Xilinx, FPGA, PSpice, Programming, Simulations, Orcad, C++, Proteus, PCB design, VHDL
asim gill
Lecturer at University of Engineering and technology Lahore
Research
Education
Queen Mary University of London 2008 — 2009
MSc, Sustainable Energy systems
University of Engineering and Technology, Lahore 1999 — 2003
BSc, Mechanical Engineering
Experience
University of Manchester May 2010 - Present
University of Engineering and technology Lahore March 2008 - Present
Nestle Professional 2004 - 2005
Skills
solar cooling, Solar Thermal, TRNSYS Software, Solar Energy
hania batool
at Dewolfe Music Limited
Computer Software
Education
University of Engineering and Technology, Lahore 2003 — 2009
Experience
Dewolfe Music Limited March 2011 - Present
i2c Inc. August 2009 - August 2010
imran raza
Assistant Rig Manager at KCA Deutag
Oil & Energy
Education
TU Clausthal, Germany 2008 — 2010
M Sc, Petroleum Engineering
University of Engineering and Technology, Lahore 2003 — 2006
B Sc., Mechanical Engineering
Experience
KCA Deutag May 2015 - Present
KCA Deutag December 2014 - Present
KCA Deutag March 2014 - Present
KCA Deutag Drilling Ltd February 2013 - Present
KCA Deutag May 2012 - February 2013
KCA Deutag October 2011 - May 2012
KCA Deutag September 2010 - October 2011
Baker Hughes April 2010 - August 2010
GPS INC June 2007 - July 2008
Skills
Rig, Oil & Gas Industry, Onshore, QHSE, Upstream, Field Development, Directional Drilling, Factory, Procurement, Petroleum, Oil/Gas, Drilling, Completions, Oilfield, Offshore Drilling, Energy Industry, Subsea Engineering, Gas, Oil & Gas, Completion, Offshore Operations, Well Testing, Drilling Engineering, Petroleum Engineering
imran sohail sadiq
process safety engineer
Environmental Services
Education
The University of Sheffield 2009 — 2010
MSc, Process safety and Loss Prevention
University of Engineering and Technology, Lahore 1997 — 2001
Bachelor, Chemical Engineering
Experience
Pizza Hut UK & Ireland June 2011 - September 2012
Millac Foods Pvt. Limited January 2003 - April 2009
Skills
FEED, PSM, P&ID, Hazard Identification, Gas Processing, ISO, Occupational Health, HAZOP, PFD, Petroleum, Chemical Engineering, Commissioning, Refinery, Engineering, Pumps, Process Safety, Factory, Project Engineering, HAZOP Study
jamal umer
Masters in Mechanical / Chemical Engineering
Mechanical or Industrial Engineering
Education
Univerza v Ljubljani 2011 — 2012
Master's Degree, Mechanical Engineering
Katholieke Universiteit Leuven 2010 — 2011
Master's Degree, Erasmus Mundus Masters in Engineering Rheology
University of Engineering and Technology, Lahore 2005 — 2009
Bachelor's degree, Mechanical Engineering
Experience
UET Lahore December 2012 - Present
UET Lahore November 2009 - November 2012
Skills
MS Project, Simulations, Matlab, CAD, Engineering, Finite Element Analysis, Engineering Design, Labview, ANSYS, Materials Science, Manufacturing, Solidworks, Pumps, AutoCAD, Mechanical Engineering, Heat Transfer, Project Engineering, Solid Edge, Fluid Mechanics
javeria iqbal
Group Investment Growwer at MOL Group
Oil & Energy
Education
University of Engineering and Technology, Lahore 2009 — 2013
Bachelors in Chemical Engineering, Chenmical Engineering
Experience
MOL Group March 2015 - Present
khalid ismail
Knitwear Technician and Fashion Professional
Apparel & Fashion
Education
Govt J.M.M High School Gujranwala PAKISTAN 1995 — 1997
Civil Draftsman / autoCAD, Architecture, A
CTTC Gujranwala PAKISTAN
DRAFTSMAN ( civil ), Engineering, A
Govt,ISLAMIA College Gujranwala PAKISTAN
F.A, B
University of Engineering and Technology, Lahore
AUTO CAD, Architectural Drafting and Architectural CAD/CADD, A
Experience
Image Knitwear, Athens, GREECE. December 2013 - Present
MARIO Knitwear Company Serres GREECE January 2011 - May 2011
NOBEL Knitwear Gujranwala PAKISTAN January 2001 - January 2008
Skills
CAD, Civil Drafting, Grading, SHIMA SEIKI knitwear..., Knitwear, Technical Drawing, AutoCAD Civil 3D
maula khan
Research (Image Processing and Data Mining)
Research
Education
Technische Universität Dortmund 2008 — 2011
Master's Degree, Mechatronics, Robotics, and Automation Engineering
University of Engineering and Technology, Lahore 2002 — 2006
Bachelor's degree, Mechatronics, Robotics, and Automation Engineering
Experience
Forschungszentrum Karlsruhe September 2011 - Present
Naubahar Bottling Company (Pvt) Ltd. GRW April 2006 - May 2007
Skills
Matlab, Teamwork, Microsoft Office, Digital Image Processing, Computer Vision, Image Analysis, Research, C++, AutoCAD, Illustrator, CAD, Bioinformatics, Solidworks, Data Mining, LaTeX, Pattern Recognition, Photoshop