University of Engineering and Technology, Lahore, Pakistan
The University of Engineering and Technology (main) located in the northern part of Lahore on the historical "Grand Trunk Road (G.T. Road)", near the magnificent Shalimar Gardens built during the great Mughal Empire.
The institution started its career in 1921 as the ‘ Mughalpura Technical College ’. Later it became the ‘Maclagan Engineering College’, a name given to it in 1923 when Sir Edwards Maclagan, the then Governor of the Punjab who laid the foundation stone of the main building, now called the Main Block, which still retains its majesty despite the wear and tear of over eight decades.
The institution started its career in 1921 as the ‘ Mughalpura Technical College ’. Later it became the ‘Maclagan Engineering College’, a name given to it in 1923 when Sir Edwards Maclagan, the then Governor of the Punjab who laid the foundation stone of the main building, now called the Main Block, which still retains its majesty despite the wear and tear of over eight decades.
University of Engineering and Technology, Lahore Alumni
Azaz Ahmad
Software Engineer, Imaging Algorithms at Microsoft
Telecommunications
Education
Tampere University of Technology 2009 — 2013
Master’s Degree, Electrical and Computing Engineering, 5.00 / 5 (GPA of 100%)
University of Engineering and Technology, Lahore 2005 — 2009
Bachelor's degree, Electrical and Electronics Engineering
Experience
Microsoft April 2014 - Present
Nokia April 2013 - April 2014
Nokia May 2012 - April 2013
Symbio May 2010 - May 2012
Tampere University of Technology November 2010 - April 2012
Nokia Research Center / Demola October 2009 - June 2010
China Mobile June 2008 - September 2008
NETS June 2007 - August 2007
Skills
Programming, Matlab, Research, Software Testing, Embedded Software, Digital Signal..., C++, Signal Processing, Embedded Systems, Mobile Devices, Windows Phone, Algorithms, Software Engineering, Testing, C, Mobile Applications
Azfar Ahmad Khan
Level3 Optical Transmission Engineer
Telecommunications
Education
University of Engineering and Technology, Lahore 2002 — 2005
Engineering, BSC Electrical Engineering (Specialization in Telecom Engineering)
Experience
Huawei March 2008 - July 2009
Huawei February 2007 - March 2008
Huawei December 2005 - January 2007
Skills
IP, Routing Protocols, DWDM, Transmission, SDH, Project Planning
Aziz Sheikh
APMP, Prince2, CertRBCB
Financial Services
Education
University of Engineering and Technology, Lahore 1999 — 2003
B.Sc., Industrial And Manufacturing Engineering, First
University College London, U. of London
Project Management (APMP)
University of Westminster
Project Management (Prince2 Practitioner)
Experience
HSBC Retail Banking and Wealth Management January 2011 - Present
Crescent Bahuman Ltd August 2006 - May 2009
Gulistan Group Of Companies October 2003 - July 2006
Skills
Supply Chain Management, Project Planning, Engineering, Project Management, Risk Management, Team Management, Continuous Improvement, Microsoft Project, Production Planning, Negotiation, Business Process, Microsoft Excel, Strategy, Procurement, Management, Process Improvement, Analytical Skills, Product Development, Microsoft Office
Basit Amin, MCIPS
Telecommunications
Education
Chartered Institute of Purchasing and Supply, UK 2013 — 2014
MCIPS, Graduate Diploma in Purchasing and Supply, Procurement and Supply Chain
Lahore University of Management Sciences 1997 — 1999
MBA, Finance, Operations
University of Engineering and Technology, Lahore 1990 — 1994
Bachelors of Engineering, Electronics and Communications
Experience
Circle Housing Group April 2011 - October 2013
Freelancer December 2010 - March 2011
Telenor Group April 2005 - November 2010
AkzoNobel December 1999 - March 2005
Engro Chemical Pakistan Ltd February 1995 - June 1997
Basit Khan
Director, Oil & Gas End Market, EMEA & India, Environment & Ground Engineering (E&GE) Business at AECOM
Environmental Services
Education
Imperial College London 1994 — 1995
MSc, Environmental Engineering
Highbury Collge, Portsmouth 2008 — 2010
SpDipEM, Environmental Management
University of Engineering and Technology, Lahore 1985 — 1990
BSc, Civil Engineering
University of Engineering and Technology, Taxila 1985 — 1990
BSc, Civil Engineering
Experience
AECOM (AECOM and URS have joined together as one company) January 2015 - Present
AECOM July 2012 - December 2014
AECOM April 2011 - July 2012
Intertek-Metoc Limited April 2008 - April 2011
MOL April 2005 - October 2007
Premier Oil October 2004 - April 2005
Premier Kufpec Pakistan BV 2000 - 2004
Premier Oil 2000 - 2004
World Wide Fund for Nature December 1995 - March 2000
LEAD International (Leadership for Environment and Development) 1996 - 1998
Skills
Project Planning, Oil, Water, Business Development, Engineering, Environmental Awareness, Environmental..., Risk Assessment, ISO 14001, Due Diligence, Environmental Impact..., Gas
Beenish Ali
Planning Engineer
Civil Engineering
Education
University of Engineering and Technology, Lahore 2004 — 2006
Msc, Civil Engineering
University of Engineering and Technology, Lahore 1999 — 2003
Bsc, Civil Engineering
Experience
Calgary Project Consultants August 2011 - July 2012
fino international ,Interior finishing Contractor March 2010 - July 2011
Al Turath Engineering Consultant October 2008 - December 2009
National Engineering Services Pakistan (Pvt) Limited (NESPAK) 2003 - 2006
Skills
Primavera P6, Project Coordination, CSCS Card, Engineering, AutoCAD, Project Planning, Asta Powerproject, Civil Engineering
Bilal Chishti
Student at University of Liverpool
Electrical/Electronic Manufacturing
Education
University of Liverpool 2009 — 2012
BEng, Mechatronics and Robotic Systems, !st
University of Engineering and Technology, Lahore 2008 — 2009
BSc, Mechatronics and Control Engineering
Salamat International Campus For Advanced Studies 2006 — 2008
A Levels, Mathematics, Further Mathematics, Physics, Chemistry and Economics, 2A's and 3B's
Experience
Home Fundraising Ltd March 2011 - May 2011
Bilal Fazal
Oil & Energy
Education
University of Engineering and Technology, Lahore 1993 — 1998
Bachelor's degree, Electrical and Electronics Engineering
Divisional Public School Faisalabad 1980 — 1990
high school
Experience
Schlumberger October 2014 - Present
Schlumberger June 2012 - Present
Schlumberger June 2010 - May 2012
Schlumberger November 2007 - May 2010
Schlumberger March 2006 - October 2007
Schlumberger January 2000 - January 2005
Skills
Wireline, Upstream, QHSE, Petroleum, Sales Management, Formation Evaluation, Oil & Gas, Operations Management, Oilfield, Technical Recruiting, Project Managers, Recruiting, Onshore, Offshore Operations
Bilal Shahzad
ASIC Designer at Ericsson
Electrical/Electronic Manufacturing
Education
KTH Royal Institute of Technology 2008 — 2010
University of Engineering and Technology, Lahore 2004 — 2008
BSc Electrical Engineering, Electronics And Communication
Experience
Ericsson June 2011 - Present
KTH August 2008 - June 2011
Skills
Simulations, VHDL, SystemVerilog, RTL design, C++, Integrated Circuit..., Verilog, FPGA, Signal Processing, ASIC, Xilinx, Embedded Systems, SystemC, C, Hardware Architecture, ModelSim
Danial Ali
Tunnelling and Geotechnical Engineer
Civil Engineering
Education
Chalmers tekniska högskola 2009 — 2012
M.Sc, Geo and Water Engineering
University of Engineering and Technology, Lahore 2003 — 2007
Bachelor of Science (B.Sc.), Mining Engineering
Experience
King Faisal University September 2012 - Present
Neelum Jhelum Consultants, Pakistan June 2009 - August 2009
Kohala Hydropower Consultants, Pakistan July 2008 - May 2009
Skills
Civil Engineering, Logging, Engineering Geology, Drilling, Tunnels, Geotechnics, Geology, Geotechnical Engineering, Tunneling, Rock Mechanics, Engineering
Dawood Khan
Programme Manager at Jaguar Land Rover
Management Consulting
Education
Warwick Business School 2009 — 2013
Master of Business Administration (MBA), Business Administration and Management, General
University of Engineering and Technology, Lahore 1997 — 2001
Bachelor of Science (BSc), Electrical and Electronics Engineering
Skills
Program Management, Project Planning, Outsourcing, Competitive Analysis, Product Development, Training, Manufacturing, Strategy, Analytics, Service Management, Business Process..., Sustainable Business..., Testing, Scope Management, Long-term Customer..., Leadership, Business Strategy, Organizational..., Strategic Planning, Project Portfolio..., Business Planning, Risk Management, Supplier Quality..., Electronics, Product Management, Cross-functional Team..., Project Management, Management Consulting, PESTLE, Consulting, Management, Business Process, Change Management, Outsourcing Management, Team Management
Dr Nisar Ahmad Qureshi
Program Chair at Higher Colleges of Technology
Mechanical or Industrial Engineering
Education
Thames Valley University, London, UK 2010 — 2011
Diploma for Teaching in the Lifelong Learning Sector (DTLLS), Education
The University of Sheffield, UK 1998 — 2004
Doctor of Philosophy (PhD), Mechanical Engineering
University of Engineering and Technology, Lahore 1984 — 1987
MSc Engineering, Mechanical Engineering
University of Engineering and Technology, Lahore 1974 — 1979
BSc Engineering, Mechanical Engineering
Experience
Higher Colleges of Technology September 2014 - Present
Higher College of Tehchnology, Al Ain UAE September 2011 - Present
Thames Valley University (University of West London) September 2008 - August 2011
Sheffield City Council September 2005 - August 2008
University of Engineering and Technology Lahore Pakistan August 1990 - August 1997
University of Engineering and Technology Lahore, Pakistan August 1984 - July 1990
University of Engineering and Technology Lahore, Pakistan April 1979 - August 1984
Skills
Research, Inspiration, Engineering, Mechanical Engineering, Product Development, Friendly Personality, Team Management, Matlab, Microsoft Word, Project Management, Strategic Planning, Intelligence, Manufacturing
Dr Prince O'Neill Iqbal CEng MICE
Designated Project Engineer (Civil Design and Construction) at Network Rail
Transportation/Trucking/Railroad
Education
Engineering Council, UK
CEng MICE, Chartered Civil Engineer
The University of Tokyo 2005 — 2008
PhD Civil Engineering, Civil Engineering
University of Engineering and Technology, Lahore 2001 — 2004
MSc Civil Engineering, Structural Engineering
University of Engineering and Technology, Lahore 1997 — 2001
BSc Civil Engineering, Civil Engineering
Skills
Team Management, Concrete, Civil Engineering, Inspection, Structural Engineers, Railways, Durability of Concrete, Bridge Assessment and..., Asset Management, Steel Structures, Maintenance Management, Sustainable Development
Dr Raja Khan (CEng FIMMM)
Director (Business Development)
Mechanical or Industrial Engineering
Education
Engineering Council, UK
Chartered Engineer, Pass
The University of Sheffield 2004 — 2009
PhD, Metallurgy, Pass
The University of Sheffield 2003 — 2004
Master in Advanced Metallurgy, Metallurgical Engineering, Distinction
University of Engineering and Technology, Lahore 1989 — 1994
Bachelor of Engineering (BEng), Metallurgical Engineering and Materials Science, A
Experience
Advanced Interactive Materials Science Ltd September 2015 - Present
TWI June 2014 - August 2015
University of Birmingham July 2009 - June 2014
University of Sheffield October 2004 - February 2009
University of Sheffield September 2003 - September 2004
National Engineering and Scientific Commission January 1999 - August 2003
Lion Steel Industries (pvt) Ltd. January 1996 - December 1998
F.S. Corporation August 1994 - December 1995
Skills
Tribology, Mechanical Testing, Offshore, Multiple Project..., Project Management, CRM, Surface Engineering, Cathodic Protection, SolidWorks, Nanoindentation, Diffusion Bonding, TIG welding, Corrosion, X-ray Stress Analyst, Project Planning, FTIR, Electroplating, Metallurgy, Scanning Electron..., 3D Laser Scanning, Materials Science, NADCAP, Powder Metallurgy, NDT, Electron Microscopy, Oil & Gas, Business Development, Hot Isostatic Processing, Problem Solving, Powder X-ray Diffraction, Proposal Writing, Quality Management, Optical Microscopy, Welding, Experimentation, Microscopy, AFM, Net Shape Manufacturing, FIB, Vacuum Brazing, TEM, X-ray, Alloys, Nanotechnology, PVD, Metallography, Geomagic, Gleeble, Materials
Dr. Arshad Hussain
INTEGRATED RESERVOIR STUDY TEAM LEAD
Oil & Energy
Education
Imperial College London 1993 — 1997
PHD, CHEMICAL ENGINEERING (EOR)
Imperial College London 1992 — 1993
MSC, PETEROLEUM ENGINEERING
University of Engineering and Technology, Lahore 1983 — 1988
BSC, PETROLEUM ENGINEERING
Experience
Saudi Aramco August 2013 - Present
SAUDI ARAMCO September 2011 - Present
CONOCOPHILLIPS UK May 2001 - August 2011
Qatar Petroleum 2005 - 2009
TROY PETROLEUM SERVICES (CONSULTANT TO BAKER HUGHES) August 1999 - April 2001
SCIENTIFIC SOFTWARE-INTERCOMP/BAKER HUGHES, LONDON August 1997 - April 1999
Oil & Gas Development Company Ltd. Pakistan 1990 - 1991
Skills
Reservoir Engineering, Reservoir Simulation, Production Optimization
Dr. Asif Iqbal
Executive Manager at Applications Center
Research
Education
Universität Siegen 2003 — 2007
Ph.D., Electrical Engineering
King Fahd University of Petroleum & Minerals 2001 — 2003
M.S., Control Systems Engineering
University of Engineering and Technology, Lahore 1994 — 1999
B.Sc., Mechanical Engineering
Experience
Hexagon AB September 2015 - Present
Hexagon Technology Center GmbH January 2013 - Present
Hexagon Technology Center GmbH June 2010 - December 2012
Leica Geosystems July 2007 - June 2010
Universität Siegen 2003 - 2007
Dr. Muhammad Kashif
Assistant Professor chez University Of Central Punjab (Official)
Automotive
Education
Université Pierre et Marie Curie (Paris VI) 2009 — 2012
M2 Energetique, propulsion terrestre
2008 — 2009
Master 2 Energetique, Science de l'ingenieur
University of Engineering and Technology, Lahore 2000 — 2004
B.Sc., Mechanical Engineering
Experience
University Of Central Punjab (Official) August 2014 - Present
Universty P.Curie UPMC-Paris6 October 2009 - September 2013
National Engineering and Scientific Commission, Islamabad, Pakistan October 2004 - February 2008
Gasco Airconditioning Private Limited, Lahore, Pakistan June 2004 - October 2004
Skills
Project Planning, Engineering, Simulations, LaTeX, HVAC, Matlab, Fluid Mechanics, Research
Ehsan Ul-Haq
Partner at ArchiGrace Limited
Architecture & Planning
Education
University of Engineering and Technology, Lahore 1997 — 2002
Bachelor of Architecture (B.Arch.), Architecture, A
Experience
ArchiGrace Limited August 2013 - Present
Barton Willmore September 2006 - February 2014
Riaz Ur Rehman & Assiciates Lahore, Pakistan 2002 - 2006
Skills
Revit, 3D visualization, Comprehensive Planning, Design Research, Architectural Drawings, AutoCAD Architecture, Architectural Design, Project Management, Architectures, Submittals, SketchUp, Residential Design, Mixed-use, Sustainable Design, Steel Detailing, Construction Drawings, Building Codes, BIM, Project Coordination, Interior Architecture, Sustainable Architecture
Ehsan Ur-Rehman
Sr. Engineer Technical Services at Aspect Software
Computer Software
Education
Universität Ulm 2000 — 2003
Master of Science (MSc), Communications Engineering
University of Engineering and Technology, Lahore 1991 — 1996
Bachelor of Science (BSc), Electrical, Electronics and Communications Engineering
Experience
Seapine Software May 2011 - March 2012
Seapine Software December 2007 - May 2011
Universität Ulm 2000 - 2003
Skills
Unix, Agile Methodologies, Software Project..., .NET, Visual Basic, Quality Assurance, Project Management, SQL, Linux, Microsoft SQL Server, C++, Java, Software Development, C#, HTML, XML
Engr Haseeb Uz Zaman
Civil Engineer
Civil Engineering
Education
Metropolia Ammattikorkeakoulu 2013 — 2014
Master of Science (MS), Construction and Real Estate management, 87.2 % (1.77 German Grading System)
Hochschule für Technik und Wirtschaft Berlin 2012 — 2014
Master of Science (MS), Construction and Real Estate Management, 87.2 % (1.77 on German Grading System)
University of Engineering and Technology, Lahore 2011 — 2012
Master of Science (M.S.), Structural Engineering
Bahauddin Zakariya University 2006 — 2011
Bachelor of Science (BSc), Civil Engineering, 83.44% (~1.83 German Grading System)
Punjab college for Information and technology Multan, Pakistan 2004 — 2006
Intermediate, Pre Engineering
Experience
Izhar Group of Companies, Pakistan July 2011 - August 2012
Skills
Construction, Real Estate Financing, Microsoft Office, Civil Engineering, Project Estimation, Real Estate Development, Tekla Structures, Construction Management, Concrete, BIM, Vico Control, ArchiCAD, Project Management, Microsoft Project, Structural Engineering, Solibri, MS Project, Reinforced Concrete, Engineering, Procurement, Project Planning
FAHAD NOOR
Lecturer at UET Lahore
Mechanical or Industrial Engineering
Education
Queen Mary, U. of London 2010 — 2013
Doctor of Philosophy (PhD), Mechanical Engineering
University of Engineering and Technology, Lahore 2009 — 2010
Master of Science (MSc), Sustainable Energy Systems
Experience
UET Lahore July 2006 - Present
Skills
C++, Microsoft Office, Simulations, Matlab, ANSYS, Numerical Analysis, Materials Science, AutoCAD, Research, Finite Element Analysis, Lecturing, LaTeX
FATIMA MUNIR
Architect at SDWCLP
Architecture & Planning
Education
Middlesex University 2012 — 2013
Master's degree, International Business
University of Engineering and Technology, Lahore 2002 — 2007
Bachelor's degree, Architecture, A
Experience
SUSTAINABLE DEVELOPMENT WALLED CITY LAHORE PROJECT 2009 - 2012
Architectural Studio Plus July 2008 - July 2009
Landmark Consultants Pvt. Ltd. (ISO Certified) August 2007 - June 2008
Department of Archaeology (Govt of the Punjab) March 2007 - July 2007
Fahim Riaz
Student at Delft University of Technology
Electrical/Electronic Manufacturing
Education
Delft University of Technology 2014 — 2016
Master's Degree, Electrical and Electronics Engineering
University of Engineering and Technology, Lahore 2009 — 2013
Bachelor's Degree, Electrical and Electronics Engineering
Experience
Water and Power Development Authority March 2013 - June 2013
QAPCO June 2011 - July 2011
Skills
Electronic workbench, Power Simulator, Matlab, Arduino, 8051 Microcontroller, Electric Power, ISIS Proteus Simulation..., C++
Faisal Akhtar EXPERT
Commissioning Engineer
Mechanical or Industrial Engineering
Education
Vaasan yliopisto / University of Vaasa 2012 — 2014
Masters in Industrial Management, Mechanical Engineering
University of Engineering and Technology, Lahore 2004 — 2008
2004 BS; University, Mechanical Engineering
Government College University, Lahore 2002 — 2003
Fsc, Pre-Engineering
Experience
MAN Diesel & Turbo September 2013 - August 2014
S-visor January 2013 - May 2014
Wartsila January 2013 - May 2013
Wärtsilä September 2008 - September 2012
Azgard9 Ltd April 2007 - September 2008
Nestle Waters Factory H&O,LLC, Dubai, UAE April 2007 - May 2007
Kohinoor Energy Limited June 2006 - July 2006
Skills
Oil/Gas, Generators, Gas Turbines, Power Plants, Energy, Valves, Wartsila Engine Control..., Overhaul, Endoscopy, Construction, Metal Fabrication, Power Generation, MS Project, Pumps, Rotating Equipment, PMP, PowerPlant Commissioning, Air Compressors, Commissioning, Thermal Imaging, Welding, PLC, Gas, Turbines, Boroscopy, Project Planning, DCS, Automation, Project Management, Piping, Steam, Troubleshooting, Engineering, Boilers, Project Control, Quality Assurance, Factory, Instrumentation, Steam Turbines
Faisal Dilshad Siddiqui
Graduate Structural Engineer
Civil Engineering
Education
The University of Manchester 2013 — 2014
Master of Science (MSc), Structural Engineering, Distinction.
University of Engineering and Technology, Lahore 2008 — 2012
Bachelor of Science (BSc), Civil Engineering, CGPA of 3.049 out of 4.0
Punjab Group of Colleges Lahore, Pakistan 2005 — 2009
Intermediate Examination, Science, Grade A+ Marks (927/1100)
Beaconhouse School System, Lahore, Pakistan 2002 — 2005
Ordinary Level
Experience
Engineering Consultancy Services Punjab (Pvt.) Ltd. www.ecsp.com.pk November 2012 - August 2013
Skills
AutoCAD, Eurocodes, Structural Analysis, Steel Structures, Individual Work, Structural Engineering, Microsoft Word, Organizational..., ETABS, SAP2000, Microsoft Excel, Concrete Testing, PowerPoint, Teamwork, Leadership, Microsoft Office, Easily Adaptable, Reinforced Concrete
Faisal Shahzad
Project Manager at eHome AUTOMATION LLC
Mechanical or Industrial Engineering
Education
SKEMA Business School, Paris 2013 — 2015
Master's Degree, Project & Program Management and Business Development
EIT 2010 — 2010
Certificate, Instrumentation, Automation, and Process Control, A
University of Engineering and Technology, Lahore 2004 — 2008
Bachelor's Degree, Mechatronics & Control Engineering, A
Experience
e-Home AUTOMATION LLC February 2011 - Present
e-Home AUTOMATION LLC November 2008 - February 2011
Skills
Project Planning, Domotique, Domotics, Project Estimation, Contracts & Claims..., Control Systems Design, Project Management, Project Engineering, Integration, Electronics, Security, Automation, DCS, Management, Electricians, Power Generation, CCTV, Commissioning, EPC, Electrical Engineering, PLC, Microsoft Project, Procurement, Access Control, Business Development, IP Surveillance, Audio Visual System..., Mechatronics, Home Automation, Engineering, MS Project, PRINCE2
Faraz Habib
Energy Analyst @ KIC INNO ENERGY/ European Institute of Technology ( EIT)
Mechanical or Industrial Engineering
Education
ESADE Business School 2012 — 2012
Crash Course on Entrepreneurship, Entrepreneurship/Entrepreneurial Studies
Universitat Politècnica de Catalunya 2011 — 2012
MS in Renewable Energy Resources, Engineering and Entrepreneurship
University of Engineering and Technology, Lahore 2006 — 2010
Bachelor's degree, Mechanical Engineering
Experience
Universidad de Polytechinca Catalunya , BarcelonaTech August 2011 - Present
University of Engineering & Technology , Lahore October 2010 - October 2011
Ravi Autos Pvt. Ltd. July 2009 - November 2009
Atlas Honda Limited July 2008 - September 2008
Skills
Solid Edge, ANSYS, Mechanical Engineering, Matlab, EES, Simulink, Heat Transfer, HOMER, Project Engineering, Pro Engineer, CFD, Energy Systems Analysis, Engineering Management, Thermodynamics, Energy Management, Engineering, Renewable Energy, AutoCAD Mechanical, CAD, Sustainable Energy, Energy Planning, AutoCAD, Cogeneration, Primavera P6
Faraz Ul Haq
Sub Agent at Skanska UK
Construction
Education
University of Surrey 2014 — 2016
Master's Degree, Civil Engineering
University of Engineering and Technology, Lahore 1997 — 2001
Bachelor's Degree, Civil Engineering, A
Government College Gujranwala 1994 — 1996
F Sc, HSC
Experience
Skanska UK January 2014 - Present
Skanska UK October 2012 - January 2014
Skanska UK January 2012 - December 2012
Skanska UK November 2008 - January 2012
Skanska UK January 2008 - November 2008
Skanska UK September 2006 - January 2008
Al Naboodah Laing O' Rourke January 2006 - September 2006
Site May 2004 - January 2006
Skills
Primavera P6, Earthworks, Project Coordination, Construction, Risk Management, Contract Management, Planning, Design Management, AutoCAD, Engineering, Civil Engineering, Project Planning, Project Management, MS Project, Highways, Procurement, Construction Management
Farhan Bin Khalid
System Engineer for ADAS at Infineon Technologies
Telecommunications
Education
Technische Universität München 2012 — 2014
Master of Science (MSc), Communication Engineering
University of Engineering and Technology, Lahore 2007 — 2011
Bachelor of Science, Electrical Engineering
Punjab College of Science, Lahore 2005 — 2007
F.Sc., Pre-Engineering
Pakistan International School, Al-Khobar 1994 — 2001
Matriculation, Physics, Mathematics, Computer Studies.
Experience
Infineon Technologies February 2015 - Present
BMW Group May 2014 - November 2014
Infineon Technologies August 2013 - April 2014
Technische Universität München January 2013 - July 2013
LUMS Schools of Science & Engineering August 2011 - September 2012
Institute of Electrical and Electronics Engineers (IEEE) May 2010 - August 2011
LUMS School of Science & Engineering July 2010 - August 2010
British Council May 2007 - June 2008
Skills
C++, VHDL, Event Management, Cooperative..., Digital Image Processing, Embedded Systems, PSpice, FPGA, Project Management, Microcontrollers, Computer Vision, Robot Operating System, Strategic Planning, Algorithms, Xilinx, Pspice, Digital Signal..., C, Wireless Sensor Networks, LaTeX, Simulink, Python, Proteus, SQL, Matlab, Compressive Sensing, IEEE, VLSI, Keil, Robotics, Verilog, Wireless Communications..., Xilinx ISE
Farhan Farooq
Radio Design Manager at Affini
Telecommunications
Education
King's College London, U. of London 2005 — 2006
MSc, Mobile and Personal Communications
University of Engineering and Technology, Lahore 1998 — 2002
BSc, Electrical Engineering
Experience
Vodafone UK February 2015 - July 2015
affini Technology Ltd June 2014 - February 2015
Relish (UK Broadband) October 2012 - May 2014
Cambridge Broadband Networks September 2010 - August 2012
AIRCOM International July 2010 - September 2010
T-Mobile April 2009 - May 2010
ARQIVA October 2006 - March 2009
Ufone October 2003 - September 2005
Skills
Network Benchmarking, Pre-sales, Cellular Suppression..., Microwave, WiFi, IP, Network Performance..., Networking, Lab and Field Trials, Technical Training, RAN Capacity, IP Backhaul, Radio Network Planning..., Network Design, Network Optimization, Project Bidding, RF Systems Design, Telecommunications, Mobile Communications, Technical Leadership, WiMAX, Small Cell Design and..., LTE, TETRA, Project Management, DAS, P2P/PTMP Backhaul, In-Building Radio Design, UMTS, Wireless, Network Troubleshooting, GSM
Farhan Mahmood
Principal Software Engineer at PaceTechnology plc
Consumer Electronics
Education
University of Engineering and Technology, Lahore 2002 — 2007
M.Sc Computer Engineering
University of Engineering and Technology, Lahore 1997 — 2001
B.Sc Electrical Engineering, Electronics and Telecommunication
Experience
Pace May 2013 - Present
Pace November 2007 - May 2013
Mentor Graphics 2005 - 2007
Mentor Graphics 2002 - 2005
Mentor Graphics 2001 - 2002
Skills
MPEG2, Consumer Electronics, C++, MIPS, Multithreading, MPEG, Device Drivers, Integration, Embedded Linux, Set Top Box, Programming, Middleware, DVB, C, System Integration, Linux Kernel, DVB-C, Digital TV, POSIX, VOD, Embedded C++, Embedded C, ARM, RTOS, VxWorks, Embedded Software, DVB-S, Debuggers, Conditional Access, PVR, Embedded Systems
Farhan Mahmood
PHD Candidate at KTH
Electrical/Electronic Manufacturing
Education
KTH Royal Institute of Technology 2010 — 2012
Master, Electrical Power Engineering
University of Engineering and Technology, Lahore 2004 — 2008
Electrical Engineering, Power
Experience
KTH September 2013 - Present
KTH December 2012 - August 2013
KTH January 2012 - November 2012
LESCO April 2010 - August 2010
Pak Elektron Limited January 2009 - April 2010
Skills
Real-time Simulation, Engineering, MS Project, Simulink, Electrical Engineering, Automation, SIMPOW(Sim power system), Transformer, Modelica, Solar Energy, Control Systems Design, Power Systems, DigSilent (Power..., COMSOL, Labview, LabVIEW, AutoCAD, Power Electronics, Matlab
Farhan Maqbool
Research Postgraduate at University of Leeds
Mechanical or Industrial Engineering
Education
Korea Advanced Institute of Science and Technology 2009 — 2011
Masters, Mechanical Engineering
University of Engineering and Technology, Lahore 2003 — 2007
BSc, Mechatronics & Control Engineering
Govt. College Jauharabad Khushab 2001 — 2003
FSc, Pre. Engineering
Experience
University of Engineering and Technology, Lahore (FSD Campus) October 2007 - Present
University of Leeds 2014 - 2014
University of Leeds 2014 - 2014
University of Leeds 2014 - 2014
University of Leeds 2013 - 2014
Skills
Labview, Solidworks, Simulations, SPSS, ANSYS, Vibration Control, R&D, Matlab, Finite Element Analysis, Engineering, Simulink, University Teaching, Solid Edge, Structural Dynamics
Farhan Naeem
Embedded System Engineer
Computer Software
Education
Eindhoven University of Technology 2015 — 2016
Master’s Degree, Embedded Systems
EIT Digital Master School 2014 — 2016
Master’s Degree, Embedded Systems
KTH Royal Institute of Technology 2014 — 2015
Master's Degree, Embedded Systems
University of Engineering and Technology, Lahore 2008 — 2012
Bachelor of Science (BSc), Electrical Engineering, 3.816/4.0
Forman Christian College, Lahore 2006 — 2008
F.Sc, Pre-Engineering
Experience
Powersoft19 November 2012 - August 2014
KICS November 2012 - November 2012
Powersoft19 July 2011 - August 2011
Pak Elektron Limited June 2009 - July 2009
Skills
C++ Language, Teamwork, FPGA, Free Logical Programming, Microchip PIC, RFID applications, C/C++, Assembly Language, Android SDK, C++, Embedded Software, microsoft visual studio..., RS232, Nios II, Visual Studio, Keil, Logic Analyzer, JTAG, TDMA, Android Development, RTOS, Verilog, Algorithm Analysis, Microcontrollers, 8052 controller, Software Defined Radio, Device Drivers, SPI, 8051 Microcontroller, Atmel AVR, high performance..., MISRA, Matlab, renesas 32-bit CPU, Ada programming, Simics, Eclipse, RF, IAR Embedded Workbench, Micro-C OS ii, I2C, Inter processor..., Xilinx ISE, Debugging, Altera Cyclone II, C, Embedded Systems, SCIOPTA RTOS, Firmware, renesas M16C controller
Farhat Irshad
Mechanical or Industrial Engineering
Education
Technische Universität Hamburg-Harburg 2008 — 2011
M.Sc
University of Engineering and Technology, Lahore 2004 — 2006
Post Graduate Diploma in Mechatronics
University of Management and Technology, Lahore, Pakistan 2004 — 2006
MBA
University of Engineering and Technology, Lahore 2000 — 2003
B.Sc (Hons)
Experience
Institute of Laser systems and Process Technologies (TUHH) May 2010 - August 2011
koester Bauchemie May 2009 - January 2010
Institute of Modelling and Computation, March 2009 - October 2009
University of Engineering and Technology, Lahore, PAKISTAN September 2006 - August 2008
University of Management and Technology February 2007 - January 2008
Skills
Testing, Numerical Analysis, AutoCAD, Team Management, Statistical Modeling, Catia, 3D Modeling, Quality Management, English, Matlab, 2D Modelling in AutoCAD, 3D Modelling in CATIA, Statistical Modeling..., Materials Science, Robotics, Materials, Experimentation, Quality Assurance, Microsoft Office, Product Development, Supply Chain Management
Farid Ahmed Khan
Student at University of Engineering and Technology, Lahore
Higher Education
Education
University of Engineering and Technology, Lahore 1995 — 2000
Experience
office 2005 - 2011
Farid Akhtar
Senior Lecturer at Luleå University of Technology
Research
Education
University of Science and Technology Beijing 2003 — 2007
PhD, Materials Sciene and Engineering
University of Engineering and Technology, Lahore 2000 — 2003
MSc, Metallurgical and Materials Engineering
University of Engineering and Technology, Lahore 1994 — 1999
B.Sc, Metallurgical and Materials Engineering
Experience
Luleå University of Technology September 2014 - Present
NeoZeo AB January 2010 - Present
Stockholm University June 2009 - Present
University of Engineering and Technology Lahore, Pakistan. March 2000 - Present
Skills
Microsoft Office, Inorganic Chemistry, Climate Change, C++, Product Development, Scanning Electron..., Microscopy, Matlab, LaTeX, Spectroscopy, Research, English, Nanotechnology, Water Treatment, Catalysis, Characterization, AFM, Surface Chemistry, Experimentation, NMR, Qualitative Research, Powder X-ray Diffraction, Nanoparticles, Renewable Energy, Physics, Modeling, Metallurgy, Science, Process Simulation, Electrochemistry, Project Management, Business Strategy, Process Engineering, Polymers, Nanomaterials, Teaching, Materials, Chemical Engineering, Simulations, Materials Science, Engineering, Failure Analysis, Innovation Management, Mathematical Modeling, Entrepreneurship, R&D, Signal Processing, Thin Films, Chemistry, Electron Microscopy
Faris Qazi
UNESCO IHE at Delft, Netherlands
Civil Engineering
Education
UNESCO-IHE, Netherlands & Kasetsart University, Thailand 2012 — 2014
Master of Science (MS), Hydraulic Engineering and River Basin Development
Government of Pakistan, Establishment Division 2011 — 2011
Certificate, Middle Career Management Course ( MCMC12)
Mahawithayalai Kasetsart 2007 — 2009
M.Eng, Construction Management
Stockholm International Water Institute- SIWI 2006 — 2006
Certificate, Intregated Transboundary Water Resource Management
University of Engineering and Technology , Lahore, Pakistan 1998 — 1999
Postgraduate diploma, Environmental Engineering Technology/Environmental Technology
University of Engineering and Technology, Lahore 1992 — 1998
Bachelor's degree, Civil Engineering
Experience
UNESCO-IHE October 2012 - Present
Deputy Commissioner at Government of Pakistan March 2006 - Present
Government of Pakistan, Ministry of Water and Power March 1999 - March 2006
Skills
Contract Management, Environmental Impact..., Hydrology, SOBEK RE, Flood Risk, HEC-RAS, Hydraulics, Project Planning, Hydraulic Modeling, Floodplain Analysis, Reservoir Modeling, LS FLOOD-FP, Hydrologic Modeling, Civil Engineering, Watershed Management, Water, Inspection, Construction Management, Sustainability, Feasibility Studies, Hydropower, Matlab, Aerial Photogrametry, GIS analyst, Environmental..., Construction, Sedimentology, Contractors, Water Resources, Environmental Education, Leadership, GIS, Climate, Integrated Water..., Remote Sensing, Commissioning, Water Management, ISIS, Dams
Farooq Mukhtar
RF Design Engineer
Design
Education
Technische Universität München 2009 — 2014
Doctor of Philosophy (Ph.D.), Electrical and Electronics Engineering
Technische Universität München 2007 — 2009
Master's degree, Microwave Engineering, 1.2
University of Engineering and Technology, Lahore 2003 — 2007
Bachelor's degree, Electrical, Electronics and Communications Engineering, 86.96%
Experience
Technische Universität München October 2010 - September 2013
Technische Universität München December 2009 - August 2010
Technische Universität München November 2008 - October 2009
Skills
Programming, Microcontrollers, VHDL, Algorithms, C, C++, Physics, Matlab, Simulations, Sensors, LaTeX, Signal Processing, Robotics, FPGA, Simulink
Farooq Tanveer
Looking for new opportunity.
Electrical/Electronic Manufacturing
Education
Technical University Munich 2012 — 2015
Master of Science (MS), Electrical (Power) Engineering
University of Engineering and Technology, Lahore 2008 — 2012
B.Sc Electrical Engineering, Power Engineering
Experience
Technical University of Denmark January 2015 - Present
BOSCH July 2014 - December 2014
Technische Universität München August 2013 - December 2013
National Transmission and Dispatch Company July 2011 - September 2011
Skills
Electronics, PSpice, Multisim, Verilog, Electrical Engineering, Xilinx, FPGA, Pspice, VHDL, C++, Simulink, Microcontrollers, Proteus, Matlab, C, AutoCAD
Farrukh Haider
Student at University of Cologne
Environmental Services
Education
Universität zu Köln 2013 — 2015
MS, Environment, Health & Safety
University of Engineering and Technology, Lahore 2013 — 2013
Certification, HSE Certified safety officer(InLine with NEBOSH), A
University of the Punjab, Lahore 2012 — 2013
Eiploma in Environmental Law, Law, A
University of the Punjab, Lahore 2008 — 2012
Bachelor of Science (BS), Environment, A
Experience
University of Cologne October 2013 - Present
Engro Foods Limited January 2012 - November 2013
Packages Limited July 2011 - September 2011
3W Systems Pakistan June 2010 - July 2010
Skills
Risk Assessment, Environmental Impact..., WTP, Safety Management..., Environmental..., Accident Investigation, Fire Safety, Construction Safety, Workplace Safety, IEE, Safety Engineering, HAZOP, EMS, JSA, EHS, EIA, Hazard Identification
Farrukh Majeed
Mobile Core Network Engineer
Telecommunications
Education
Université de Versailles Saint-Quentin-en-Yvelines 2005 — 2006
Master Professional, Radio Communication and Mobile Networks
University of Engineering and Technology, Lahore 2000 — 2003
Electrical Engineer, Electronics and Telecom
Experience
SFR January 2013 - Present
SFR July 2010 - December 2012
SFR June 2009 - May 2010
NSN February 2008 - December 2008
France Telecom R&D April 2007 - November 2007
Siemens,France October 2006 - March 2007
TeleCard Limited January 2004 - January 2005
Skills
LTE, VAS, UMTS, SIGTRAN, VoLTE, VoIP, H.248, UTRAN, Diameter, Mobile Networking, GPRS, System Integration..., IP, SS7, Messaging, MPLS
Farrukh Mian
Entrepreneur | Innovator
Financial Services
Education
University of Warwick - Warwick Business School
MBA
Iowa State University
B Sc
University of Engineering and Technology, Lahore
Bachelor’s Degree
University of Oxford
Continued Professional Development
University of Cambridge
Management Development Programme
Experience
PaaySay Ltd July 2014 - Present
Independent July 2014 - Present
Earthport February 2011 - June 2014
GBST April 2008 - February 2011
EDS, an HP company 2004 - 2008
Skills
Agile Project Management, Business Analysis, Strategy, Project Delivery, Program Management, Management, Team Management, Solution Architecture, Agile Methodologies, Requirements Gathering, Java, Requirements Analysis, Process Engineering, Professional Services, Enterprise Architecture, Risk Management, Project Planning, Business Process, Oracle, Business Intelligence, Telecommunications, Cross-functional Team..., Integration, Leadership, Management Consulting, Business Strategy
Fazal Farooq
Telecommunications Professional
Telecommunications
Education
University of Engineering and Technology, Lahore
M.Sc, Electronics and Communications
University of Engineering and Technology, Lahore 1999 — 2002
BSc, Electrical
Experience
NOKIA July 2011 - Present
Warid Telecom March 2006 - April 2011
Ufone December 2004 - March 2006
WAPDA (FESCO) July 2003 - December 2004
Skills
Vendor Management, WCDMA, PDH, Network Performance, LTE, Drive Test, Rollout, Managed Services, ATM Networks, DWDM, Ethernet, HSDPA, RAN, GPRS, RF, Microwave, Transmission, SS7, WiMAX, Network Optimization, NSN, UMTS, 3G, SDH, 2G, Cellular Communications, IP, Computer Network..., Edge, HSPA, TEMS, Core Network, Telecommunications, GSM, RNC, NMS, TEMS Investigation, ATM networks, MW, BSS
Fazal Hussain
Control Systems Engineer
Oil & Energy
Education
University of Engineering and Technology, Lahore 2000 — 2003
Electrical Engineering, Electronics, Communications, Computer Systems
Experience
Self Employed - Aberdeen February 2012 - Present
Emerson Process Management March 2011 - February 2012
Intech Process Automation June 2007 - August 2010
Intech Process Automation September 2005 - June 2007
Siemens Industrial Solutions and Services Group (I&S) January 2004 - September 2005
Skills
Yokogawa CS3000, Foundation Fieldbus, PLC, DCS, Wonderware, Plant Maintenance, Siemens PCS7, Profibus, Siemens PLCs, Control Logic, P, P&ID, Network Communications, Commissioning, Instrument Control, Project Management, Process Control, Emerson DeltaV, Allen-Bradley, Instrumentation, Project Planning, SCADA, Offshore Oil & Gas, Allen Bradley, Automation, Control Systems Design, Procurement, GE Proficy
Fouzia Zahra
architect/ interior designer freelance
Design
Education
University of Engineering and Technology, Lahore 1990 — 1996
Bachelors, Architecture
Experience
freelance head of design servicesbare designFebruary 2010 - October 2011
dwp design worldwide partnership May 2008 - January 2010
Skills
AutoCAD Architecture, Space planning, Design Management, Space Planning, Furniture, AutoCAD, SketchUp, Residential Design, Concept Design, Sketching, Retail Design, Interior Design, Architectural Design, Rendering, Interior Architecture, Design Research, FF&E, Product Design
G. Murtaza Ali Khan Afghani
Asset Reliability Manager at BP
Oil & Energy
Education
The University of Manchester 2012 — 2014
Post-Graduation, Engineering Management
University of Engineering and Technology, Lahore 1984 — 1990
BSc Engineering, Mechanical
Experience
BP July 2015 - Present
BP UK July 2012 - July 2015
ORYX GTL November 2008 - June 2012
Pakistan Refinery Limited August 2008 - November 2008
BHP Billiton July 2004 - August 2008
OMV October 2002 - July 2004
Fauji Fertlizer Bin Qasim Limited December 1997 - October 2002
Saadi Cement Limited April 1995 - November 1997
Rupali Polyester Limited April 1990 - April 1995
Skills
Business Development, Cost Management, Oil & Gas, Project Management, Budget Setting, Management of Change, Systems, Procurement, Construction Cost..., HSE Management Systems, Change Management, Operations Management, Management of Systems..., Project Portfolio..., Commissioning, Contracts..., Facilities Management, Economics, Refinery, Factory, Information Systems, Petroleum, Maintenance Management, Facilities Engineering, Budget Monitoring, Engineering Management, Engineering, Resource Management, Contract Management, Gas, Inspection, HAZOP, Petrochemical, Management, Budget Process, Project Economics and..., Operational Risk..., Air Compressors, Process Engineering, HAZOP Study
Ghazal Javed
Digital Electronics Engineer; Technical Communication
Research
Education
University of Engineering and Technology, Lahore 2003 — 2007
Bachelors, Electronics and Communication
Experience
Satellite Research and Development Centre, SUPARCO, Pakistan May 2012 - January 2013
Satellite Research and Development Centre, SUPARCO, Pakistan March 2007 - May 2012
Skills
FPGA, Signal Processing, Labview, Simulations, Electronics, VHDL, PCB design, Verilog, C, PCB Design, ModelSim, Simulink, Embedded Systems, Digital Signal..., C++, Embedded Software, Xilinx, Matlab, Microcontrollers, Keil, Digital Signal..., Telecommunications, Microprocessors, LabVIEW, ASIC, Windows
Ghazanfar Ali Safdar
Senior Lecturer at University of Bedfordshire
Higher Education
Education
Queens University Belfast, UK 2002 — 2005
Doctor of Philosophy (PhD), Electrical, Electronics and Communications Engineering
INPG, Grenoble, France 1999 — 2001
Master of Engineering (M.Eng.), Computer Science and Telecommunications
University of Engineering and Technology, Lahore
BSc (Hons) Electrical Engineering
Experience
University of Bedfordshire March 2009 - Present
Schlumberger, France March 2001 - August 2001
CTI (Siemens) February 1998 - March 1999
Skills
Statistics, Staff Development, Academic Administration, Qualitative Research, Research Design, Programming, Educational Technology, SPSS, Science, Public Speaking, Simulations, Theory, Academia, Adult Education, Data Analysis, Lecturing, Matlab, Research, Teaching, Algorithms
Ghulam Moeen uddin
Assistant Professor at UET Lahore
Research
Education
Northeastern University 2007 — 2012
PhD, Mechanical engineering (MBE deposition of nano scale thin films)
Northeastern University 2007 — 2010
MS Computer Systems Engineering, CAD CAM
University of Engineering and Technology, Lahore 2000 — 2004
BSc Engineering, Industrial and Manufactruing Engineering
Crescent Model Higher Secondary School
Experience
UET Lahore October 2014 - Present
University of York October 2013 - September 2014
Interface Engineering Lab September 2012 - March 2013
Northeastern University September 2007 - August 2012
Northeastern University September 2007 - August 2012
Nestle Pakistan Ltd June 2005 - December 2006
AlanDick Pakistan 2004 - 2005
Skills
Statistical Modeling, Surface Chemistry, CAD CAM, Carbon Nanotubes, Nanotechnology, AFM, Nanomaterials, Engineering, Thin Films, CAD/CAM, CVD, Thin Film Solar Cell..., Matlab, Production Planning, Design of Experiments, XPS, Solar Cells, Materials Science, UHV, Scanning Electron..., Morphology, Mass Spectrometry, High Rate High Volume..., Six Sigma, Experimentation, Characterization, Spectroscopy, Molecular Beam Epitaxy, Semiconductor..., Surface Processing, Dielectrophoretic..., Surface, Neural Networks for..., Powder X-ray Diffraction, Manufacturing, Surface Morphology AFM, Semiconductors, Functional Oxide..., X-ray Crystallography..., Vacuum, Nanofabrication, Surface Structure...
Ghulam Rana , PMP
Principal Engineer at Emerson UK
Oil & Energy
Education
University of Engineering and Technology, Lahore 1998 — 2002
BE, Electronics Enginering
Experience
Emerson Process Management UK July 2011 - Present
MPO November 2010 - June 2011
Yokogawa May 2007 - November 2010
Siemens September 2002 - April 2007
Skills
DCS, SCADA, Commissioning, Process Control, Instrumentation, Project Management
Goher Ur Rehman Mir
Recently Completed MSc Engineering and Policy Analysis (TU Delft) | Available for Full Time Employment Opportunities
Public Policy
Education
Delft University of Technology 2013 — 2015
Master of Science (MSc), Engineering & Policy Analysis, 8.15/10
University of Engineering and Technology, Lahore 2006 — 2010
Bachelor of Science (BSc), Electrical Engineering, 3.44/4.0
Experience
TU Delft January 2015 - June 2015
Alcatel-Lucent October 2011 - August 2013
OMV August 2011 - September 2011
Skills
Report Writing, Analytical Skills, Sustainable Development, Economics, Research, Troubleshooting, SPSS, Public Speaking, Project Management, Optimization, Policy Analysis, Electrical Engineering, Public Policy, Vensim, Cross Cultural..., Data Analysis
Gul Ahmed
Application Packaging and Virtualisation Specialist at BT Global Services
Computer Software
Education
University of Engineering and Technology, Lahore 1983 — 1986
Chemical Engineering
Experience
BT Global Services August 2014 - Present
HM Revenue & Customs October 2013 - July 2014
Computacenter Services August 2009 - September 2013
NEC Group March 2009 - August 2009
BT Global Services October 2008 - March 2009
Fujitsu Services September 2007 - October 2008
Capgemini September 2006 - August 2007
Anglo American April 2006 - September 2006
Capgemini January 2006 - April 2006
Norwich Union May 2005 - December 2005
Skills
InstallShield, X64, XP, Windows XP, Integration, Windows Server 2008, Radia, System Administration, App-V, MSI, VBScript, Powershell, Softgrid, Citrix, Application..., Software Installation, Operating Systems, Software Deployment, VMware, SCOM, System Deployment, Windows 8, Application Packaging, Scripting, Hyper-V, Deployment, Windows 8.1, Compatibility Testing, Windows 7, Wise Packaging Studio, Group Policy, Virtualization, Active Directory, Windows Server, Orca, SMS, SCCM
Gulraiz Butt
Radio Access & Mobile Broadband Solutions, Ericsson
Telecommunications
Education
University of Surrey 2000 — 2002
University of Surrey 1987 — 1991
University of Engineering and Technology, Lahore 1982 — 1986
Experience
Ericsson UK October 2009 - Present
Ericsson Saudi August 2005 - September 2006
Ericsson 1997 - 1998
Univerity of Surrey 1989 - 1995
Inmarsat 1992 - 1993
H M Suleman
Sr.Research Officer at UET Lahore
Automotive
Education
Politecnico di Torino 2011 — 2013
Master of Science (M.Sc.), Automotive/Mechanical Engineering
University of Engineering and Technology, Lahore 2005 — 2009
Bachelor of Science (BSc), Mechanical Engineering
Experience
Politecnico di Torino October 2013 - September 2014
ISIL Group November 2013 - April 2014
OLE Group October 2012 - April 2013
Politecnico di Torino March 2011 - June 2011
Government of Punjab February 2010 - November 2010
S.T. ENGINEERING SERVICES (PVT) LTD June 2007 - July 2007
Skills
CAD, Electronics, C, English, Simulink, Engineering, Social Media, Analysis, Teamwork, SolidWorks, Simulations, Microsoft Office, Powertrain, CATIA, Public Speaking, MS Project, Lean Manufacturing, Research, ANSYS, Solidworks, Project Planning, Management, AutoCAD, Product Development, R&D, Catia, Customer Service, Microsoft Excel, C++, Automotive, Mechanical Engineering, Matlab, Continuous Improvement, Finite Element Analysis, PowerPoint, Photoshop, Vehicles, Manufacturing, Microsoft Word, Automotive Engineering
Hafiz Abdul Manan
Design Engineer at Automotive Engineering Design
Mechanical or Industrial Engineering
Education
Tallinn University of Technology 2014 — 2015
Master of Science (MSc) in Engineering, Design-Engineering
University of Engineering and Technology, Lahore 2007 — 2011
Bachelor of Engineering (BEng), Mechanical Engineering, 3.2
Government College University, Lahore 2005 — 2007
FSc, Pre Engineering, A
Army Public School Hyderabad 2003 — 2005
Matriculation, Science, A+
Experience
Automotive Engineering Design September 2011 - Present
Fauji Fertilizer Company Limited July 2010 - August 2010
Skills
Mechanical Engineering, Engineering, SAP ERP, Microsoft Project, Solid Modeling, NX 6, Kinematics, NX Unigraphics, Solid Edge, Matlab, Unigraphics, Product Development, Sheet Metal, ANSYS, CoCreate, Engineering Drawings, Solidworks, Autodesk Inventor, SolidWorks, Resource Management, CAD, Concentrated Solar Power, AutoCAD, Energy, Thermodynamics, MS Project, Manufacturing, Inventor, Design Engineering
Hafiz Aiman Jamshaid
Student at University of Stuttgart
Civil Engineering
Education
Universität Stuttgart 2012 — 2014
Master of Science (MS), Water Resources Engineering & Management
University of Engineering and Technology, Lahore 2007 — 2011
Bachelor of Science (BS), Civil Engineering
Experience
National Engineering Services Pakistan (Pvt) Limited (NESPAK) September 2011 - August 2012
Skills
MS Project, Microsoft Excel, C language, PowerPoint, Microsoft Office, AutoCAD, Engineering, Microsoft Word, Construction
Hafiz Asad Ali Awan
Doctoral Candidate at Aalto University
Electrical/Electronic Manufacturing
Education
Aalto University 2015 — 2019
Doctor of Philosophy (PhD), Electrical and Electronics Engineering
Aalto-yliopisto 2013 — 2015
Master's degree, Electrical Engineering
University of Engineering and Technology, Lahore 2008 — 2012
Bachelor of Science (B.Sc.), Electrical Engineering
Experience
Aalto University April 2015 - Present
Aalto University June 2014 - March 2015
EPESOL Pvt. Ltd July 2012 - July 2013
Skills
dSPACE, Engineering, ETAP, Microcontrollers, Simulations, Power Electronics, Proteus, Simulink, Programming, PSCAD/EMTDC, Electric Drives, PSpice, Matlab, LaTeX, Electrical Engineering, Pspice, Orcad, Control Systems Design, Power Systems, Microsoft Office
Hafiz Mudassir Munir
Electrical/Electronic Manufacturing
Education
University of Greenwich, London 2011 — 2012
Master of Science (M.Sc.), Electrical Power Engineering, Merit
University of Engineering and Technology, Lahore 2005 — 2009
Bachelor's degree, Electrical Power Engineering
PAF College, Mianwali 2003 — 2005
Higher Secondary Certificate Examination, Pre-Engineering
Experience
Thermal Power Plant May 2012 - July 2013
University of Greenwich, London June 2011 - February 2012
MORGAN TECHNOLOGIES, Pakistan. January 2010 - October 2010
Kot-Addu Thermal Power Plant, Pakistan. June 2008 - November 2008
Skills
Excel, Proteus (ISIS & ARES), LOGO-PLC, Word, Customer Relations, C, Power World Simulator, Microsoft Office, Matlab
Hafiz Mustafa
Senior Radio Planning and Optimisation Consultant at Telefonica UK
Telecommunications
Education
Project Management Institue 2014 — 2014
Project Management Professional
King's College London, U. of London 2002 — 2004
MSc, Mobile and Personal Communication
University of Engineering and Technology, Lahore 1998 — 2002
BSc, Electrical Engineering
Experience
Ericsson August 2012 - May 2015
Motorola Mobility July 2010 - August 2012
Vodafone May 2010 - July 2010
Ericsson May 2009 - March 2010
Motorola Mobile Devices June 2006 - February 2009
Aircom International November 2004 - March 2006
O2 UK (a Telefónica Company) September 2004 - October 2004
Alcatel April 2002 - June 2002
Skills
Embedded Systems, GPRS, RF, Telecommunications, WiMAX, WCDMA, UMTS, HSPA, ClearCase, 4G, IP, BSS, 2G, RAN, LTE, TEMS, Core Network, SIP, 3GPP, Cellular Communications, NSN, 3G, Network Optimization, Cloud Computing, CDMA, GSM, SS7, Wireless, MapInfo, Bluetooth, Edge, Mobile Technology, Mobile Devices, HSDPA, Drive Test, WiFi, Mobile Communications
Hafiz Salman Zaheer
Master Thesis Student at PARTEX Oil & Gas
Oil & Energy
Education
Instituto Superior Técnico 2014 — 2015
Master of Science (M.Sc.), Energy Engineering & Management
Silesian University of Technology Gliwice, Poland 2013 — 2014
Master of Science (M.Sc.), Clean Fossil & Alternative Fuels Energy
University of Engineering and Technology, Lahore 2008 — 2012
B.Sc, Petroleum Engineering
Govt. Muslim Model High School Urdu Bazaar Lahore 2004 — 2006
Matriculation, Mathematics, Physics, Chemistry and Biology
Experience
PARTEX Oil & Gas May 2015 - Present
Exalo Drilling S.A. Poland August 2014 - September 2014
Oil & Gas Development Company Ltd. Pakistan July 2012 - July 2012
Skills
Solid Expandable..., Petroleum Engineering, Reservoir Engineering, Petrel, Carbon Capture &..., Microsoft Office, Petroleum Geology, Upstream, Production Optimisation, Completion, Petrophysics, Reservoir Simulation, Drilling Engineering, Production Engineering, Well Testing, Hydraulic Fracturing, Teamwork
Hafiz Wasif
Senior Asset Management Engineer at Intelligent Energy
Oil & Energy
Education
Charter Management Institute CMI 2010 — 2012
Level 5 Diploma, Leadership & Management
The University of Salford 2007 — 2009
MSc, Robotics & Automation
University of Engineering and Technology, Lahore 2002 — 2006
BSc, Mechatronics & Control
Experience
Intelligent Energy July 2012 - Present
Stork Food & Dairy System & University of Portsmouth July 2010 - July 2012
Bolton Plastic Components November 2006 - August 2007
Avanceon April 2006 - September 2006
Skills
FMEA, Data Analysis, Fuel Cells, Data Communication, Simulations, Vehicle Dynamics, Bayesian statistics, Procurement, Machine Learning, Root Cause Analysis, Mathematical Modeling, Fuzzy Logic, Condition Monitoring, Analysis, MATLAB, Instrumentation, Reliability Engineering, Vibration Analysis, Database Management, Matlab, Power Generation, Project Management, Manufacturing, Mechatronics, Project Engineering, Process Automation, Statistical Signal...
Haider Jawad
Design Engineer at AYTON WILLOW
Research
Education
Technische Universität Hamburg-Harburg 2010 — 2013
Master's degree, Mechatronics, Robotics, and Automation Engineering
University of Engineering and Technology, Lahore 2004 — 2008
B.E, Mechanical Engineering
Experience
AYTON WILLOW November 2013 - Present
EADS October 2012 - April 2013
AkzoNobel September 2008 - September 2010
Schlumberger June 2007 - August 2007
Skills
Piping, Commissioning, Heat Exchangers, Python, Engineering, Oil/Gas, HAZOP, Matlab, Mechanical Engineering, Oil & Gas, Pumps, Power Plants, Petroleum, AutoCAD, Preventive Maintenance, Testing, ANSYS, P&ID, EPC, Project Engineering, Power Generation, Manufacturing, Gas Turbines, Control Systems Design, Microsoft Office, Factory, Simulations, Refinery, Simulink, Instrumentation, Inspection
Hamad Ahmed
Research Fellow at Queen's University Belfast
Higher Education
Education
Queen's University Belfast 2009 — 2013
Doctor of Philosophy (PhD), Intense laser driven ion beams and its applications
Queen's University Belfast 2008 — 2009
Master's degree, Plasma Physics
University of Engineering and Technology, Lahore 2004 — 2006
Master of Science (M.Sc.), Applied Physics
Experience
Queen's University Belfast October 2013 - Present
Hamad ur Rehman
Research Assistant at Departmat of Material Science
Research
Education
University of Erlangen-Nuremberg 2007 — 2010
M.Sc., Advanced Material and Processes
University of Engineering and Technology, Lahore 2002 — 2006
B.Sc., Metallurgical and Materials Engineering
Experience
Friedrich-Alexander-University of Erlangen-Nürnberg June 2010 - Present
Hilti April 2009 - August 2009
UET Lahore August 2006 - September 2007
Dawood Hercules Chemicals Ltd. 2006 - 2006
Skills
AFM, Matlab, Materials Science, Nanomaterials, Thin Films, Finite Element Analysis, Spectroscopy, Creep, Electron Microscopy, LaTeX, Nanoindentation, Metallurgy, Materials, EBSD, Simulations, Experimentation, Physics, EDX, Corrosion, Optical Microscopy, Microscopy, Abaqus, Powder X-ray Diffraction, Scanning Electron..., Molecular Dynamics, Nanotechnology, Superalloys, Characterization
Hamid Chughtai
Project Planner
Oil & Energy
Education
University of Engineering and Technology, Lahore 1991 — 1996
BE, Mechanical
Experience
WorleyParsons September 2012 - Present
Foster Wheeler January 2012 - July 2012
Land & Water Srevices Ltd February 2010 - January 2011
Doosan Babcock February 2008 - January 2010
Spie Matthew Hall July 2007 - February 2008
SPIE UK 2007 - 2008
saudi binladin group 2000 - 2005
saudi binladin group 2000 - 2005
Descon Engineering Limited 1996 - 2000
Descon Engineering Limited 1996 - 2000
Skills
EPC, Construction Management, Project Planning, Cost Control, Onshore, Primavera P6, Nuclear, Energy Industry, Petrochemical, Project Control, Gas, Commissioning, Power Plants, Refinery, Project Estimation, LNG, Engineering, Oil/Gas, Petroleum, Energy, Piping, MS Project, Construction, Procurement, Contract Management, Project Engineering, Oil & Gas Industry
Hamza Farooq
Embedded Linux Developer
Automotive
Education
Fachhochschule Darmstadt 2012 — 2014
Master of Science (MSc), Electrical Engineering and IT
University of Engineering and Technology, Lahore 2006 — 2010
BSc Electrical Engineering, Masters in Electrical Engineering and Information Technology
Experience
Visteon Corporation June 2015 - Present
Continental Engineering Services & Products GmbH May 2014 - November 2014
Continental Engineering Services & Products GmbH January 2014 - April 2014
Continental May 2013 - November 2013
MicroTech Industries(pvt) Ltd. October 2010 - August 2012
Electronics Club, UET Lahore September 2009 - July 2010
Skills
MPLAB, Embedded Systems, GSM, Verilog, Assembly, Ethernet, Ladder Logic, Hardware, Testing, Matlab, Manufacturing, IDE, C, Application Development, Electronics, RS485, C#, SPI, Linux Server, Microcontrollers, I2C, Firmware, Software Design, Software Development, Circuit Design, USB, Automation
Hamza Hassan
Master in Space Science and Technology with majors in Robotics and Automation
Aviation & Aerospace
Education
Julius-Maximilians-Universität Würzburg / University of Wuerzburg 2010 — 2014
M.Sc, Aeronautics/Aviation/Aerospace Science and Technology, General
Luleå University of Technology 2010 — 2011
Master, Space Science and Technology
University of Engineering and Technology, Lahore 2005 — 2009
B.Sc, Mechanical Engineering
Experience
Julius-Maximilians-Universität Würzburg / University of Wuerzburg July 2012 - January 2013
Multan Institute of Cardiology April 2010 - August 2010
M/s Hayat Brothers Construction Company, October 2009 - February 2010
University of Engineering & Technology August 2008 - September 2009
Skills
Simulations, Microsoft Project, Solid Edge, Mechanics of Materials, PTC Creo, Modeling, MSVisio, C++, Spacecraft, Simulink, Laboratory Robotics, Matlab, Engineering, Aerospace Engineering, Mechanical Engineering, AutoCAD, Java, LabVIEW, Satellite Communications, Satellite Structures, Satellite Ground Systems, SolidWorks, Robotics, LaTeX, Pumps, Finite Element Analysis, Microsoft Excel, CATIA, LyX, Pro Engineer, Solidworks, Catia, ANSYS, Microsoft Office, Satellite Systems..., CAD, GPS Tracking, Satellite Tool Kit
Haroon Faisal
Project Manager at Nestlé Suisse
Food & Beverages
Education
University of Engineering and Technology, Lahore 1999 — 2003
Experience
Nestlé Suisse January 2004 - Present
Haroon Mahmood
Doctoral Student at University of Trento
Nanotechnology
Education
Università degli Studi di Trento 2014 — 2016
Doctor of Philosophy (PhD), Materials Engineering
National University of Sciences and Technology, Islamabad 2011 — 2013
Master of Science (MS), Materials and Surface Engineering
University of Engineering and Technology, Lahore 2006 — 2010
Bachelor of Science (B.Sc.), Metallurgical & Materials Engineering
Fazaia Intermediate College, Lahore 2004 — 2006
F.Sc, Pre-Engineering
Experience
University of Trento January 2014 - Present
Pakistan, National University of Sciences & Technolgy September 2012 - April 2013
Private Firm January 2011 - September 2011
Pakistan Railways Workshop June 2009 - July 2009
Descon Engineering June 2009 - June 2009
Skills
NDT, Materials Science, Metallography, Quality Management, Scanning Electron..., Matlab, AFM, Electrical Engineering, Heat Treatment, Materials, Quality Assurance, Mechanical Testing, Metallurgy, Testing, Inspection, Optical Microscopy, Atomic Force Microscopy, Surface Engineering, Software Quality..., Corrosion Engineering, Corrosion, Surface, Failure Analysis, Quality Control, Engineering, ISO
Haroon Rajah
Customer Service Advisor at Shell UK
Chemicals
Education
University of Wales, Cardiff 2010 — 2011
MBA Project Managment
University of Engineering and Technology, Lahore 2004 — 2008
BSc Chemical Engineering
Experience
Shell UK June 2010 - Present
G4S Risk Management October 2010 - January 2011
Dewan Salman Fibre Ltd August 2008 - August 2009
Skills
Engineering Management, Oil&Gas, Offshore Project..., Process, Polymers, Chemicals, Utility, Project Engineering, Chemical Engineering
Hasan Shah
Senior Project Engineer Automation and Control Systems
Electrical/Electronic Manufacturing
Education
University of Engineering and Technology, Lahore 2006 — 2008
Masters in Engineering, Control Systems, A
University of Engineering and Technology, Lahore 2002 — 2005
Bachelor of Engineering (BEng), Mechatronics and Control System Engineering, A+
Experience
CCS May 2009 - Present
GE Oil & Gas 2014 - 2015
Nestlé November 2007 - April 2009
Engro Innovative Automation Engineering Ltd January 2006 - November 2007
Skills
Factory, Microsoft SQL Server, Project Management, CSCS, PLC, Automation, Project Engineering, Testing, VBA, Allen Bradley, SCADA, AutoCAD, HMIs, Manufacturing, Control System..., Eplan, Wonderware, Process Automation, Rockwell, Omron