University of Engineering and Technology, Lahore, Pakistan
The University of Engineering and Technology (main) located in the northern part of Lahore on the historical "Grand Trunk Road (G.T. Road)", near the magnificent Shalimar Gardens built during the great Mughal Empire.
The institution started its career in 1921 as the ‘ Mughalpura Technical College ’. Later it became the ‘Maclagan Engineering College’, a name given to it in 1923 when Sir Edwards Maclagan, the then Governor of the Punjab who laid the foundation stone of the main building, now called the Main Block, which still retains its majesty despite the wear and tear of over eight decades.
The institution started its career in 1921 as the ‘ Mughalpura Technical College ’. Later it became the ‘Maclagan Engineering College’, a name given to it in 1923 when Sir Edwards Maclagan, the then Governor of the Punjab who laid the foundation stone of the main building, now called the Main Block, which still retains its majesty despite the wear and tear of over eight decades.
University of Engineering and Technology, Lahore Alumni
Mohammed baqir Raza
Attended University of Engineering and Technology, Lahore
Telecommunications
Education
University of Engineering and Technology, Lahore 2008 — 2012
Bachelor's degree, Mechanical Engineering
Experience
ACN January 2014 - Present
Mohibi Hussain
Technology Strategy & Research Consultant RIFE project at University of Cambridge
Information Technology and Services
Education
Massachusetts Institute of Technology 2011 — 2013
Master's degree, Technology & Policy Management
University of Engineering and Technology, Lahore 1997 — 2001
Elect.Engg, Electronics/Telecommunications
Experience
University of Cambridge September 2015 - Present
Punjab Information Technology Board March 2015 - September 2015
Digital Globe Services, Inc. February 2014 - February 2015
MIT Communications Future Program, CSAIL, USA August 2011 - September 2013
IBM December 2007 - May 2011
Mobilink- Orascom Telecom October 2001 - November 2007
Skills
Information Technology, Managed Services, Governance, System Deployment, Network Design, Virtualization, Information Security, Data Center, Program Management, Information Security..., PMP, PMO, Service Delivery, Business Development, Business Strategy, Solution Architecture, Network Security, Security, Enterprise Architecture, Strategy, Business Analysis, Team Management, Product Management, Business Process, IT Service Management, Network Architecture, Business Continuity, Pre-sales, Vendor Management, Integration, Enterprise Software, Project Management, SaaS, IT Operations, IT Management, Infrastructure, Management, Firewalls, Mobile Devices, Project Portfolio..., ITIL, Leadership, Cloud Computing, Disaster Recovery, Networking, Juniper, Telecommunications, Outsourcing, IT Strategy, Business Intelligence
Mohsin Ali Khan
Software Engineer | Accenture
Computer Software
Education
Lahore University of Management Sciences 2012 — 2014
Master's degree, Computer Science
University of Engineering and Technology, Lahore 2007 — 2011
Bachelor's degree, Computer Science, A
Experience
Accenture UK May 2015 - Present
NetSol Technologies Inc. June 2014 - April 2015
Lahore University of Management Sciences January 2014 - May 2014
NetSol Technologies Inc. April 2012 - September 2012
trg tech September 2011 - March 2012
Skills
CodeIgniter, Team Leadership, Oracle, Software Development, Software Engineering, HTML, Entity Framework, MySQL, ASP.NET MVC, JavaScript, Web Services, jQuery, Visual Studio, Distributed Systems, C++, Enterprise Software, WCF, Web Development, XAMPP, Software Design Patterns, ASP.NET, SQL, Object Oriented Design, Java, Agile Project Management, C#, VB.NET, Microsoft SQL Server, XML, OOP, JSON, .NET, MSMQ, CSS, Web Applications, SDLC
Mohsin Hassan
Sr. VoLTE/LTE Design/Testing/Solution/Performance/Optimisation Consultant
Telecommunications
Education
University of Maryland - Maryland Technology Enterprise Institute 2013 — 2013
Coursera Course: Developing Innovative Ideas for New Companies
University of Virginia - Darden Graduate School of Business Administration 2013 — 2013
Coursera Course: Grow to Greatness: Smart Growth for Private Businesses, Part I
University of Engineering and Technology, Lahore 2001 — 2004
Bachelor of Science (BSc), Electrical Engineering
Experience
EE September 2015 - Present
Huawei Technologies August 2014 - September 2015
Ericsson April 2009 - July 2014
Nokia Siemens Networks (NSN) - Dubai, UAE October 2008 - April 2009
Huawei June 2008 - October 2008
Ericsson August 2007 - June 2008
Warid Telecom, Lahore, Pakistan September 2006 - August 2007
Huawei August 2005 - August 2006
Aircom International, Pakistan January 2005 - July 2005
Skills
Transmission, 3G UMTS, RF/RAN Performance, VAS, RF Planning, Mobile Communications, LTE, NSN, 2G GSM, HSPA, Telecommunications, HSDPA, 2G, Entrepreneurship, GSM, RNC, Cellular Communications, 4G, RAN, Network Optimization, BSS, Project Management, Actix, Communications Audits, UMTS, Leadership Development, Open Source Software, Team Leadership, RF, 4G LTE, Rollout, Performance Tuning, RF/RAN Optimisation, HSUPA, Drive Test, GPRS, 3G, UTRAN, Project Planning, WCDMA, WiMAX, RF/RAN Design, Optimization, Edge
Mohsin Javed
PhD student, Numerical Analysis, Oxford
Research
Education
University of Oxford 2012 — 2016
Doctor of Philosophy (PhD), Computational and Applied Mathematics
University of Oxford 2010 — 2011
Master of Science, Mathematical Modeling and Scientific Computing
University of Engineering and Technology, Lahore 2005 — 2009
Bachelor of Science (Hons), Electrical Engineering; Telecommunication & Electronics
Experience
Aleron.org June 2015 - Present
University of Oxford April 2012 - Present
UET Lahore September 2009 - Present
University of Oxford October 2010 - September 2011
KICS July 2009 - October 2010
UET Lahore January 2006 - January 2009
Skills
Applied Mathematics, Mathematical Modeling, Simulations, Linux, Microcontrollers, Matlab, Software Engineering, Simulink, Research, Algorithms, HTML, Numerical Analysis, C, Electrical Engineering, C++, Programming
Mohsin Saleemi
Lab Manager at National Facility, Scientist, Researcher, PostDoc, Tool Responsible, Material Chemist.
Research
Education
KTH Royal Institute of Technology 2010 — 2014
Doctor of Philosophy (Ph.D.), Materials Chemistry, Paased
KTH Royal Institute of Technology 2007 — 2009
Masters, Nanotechnology
University of Engineering and Technology, Lahore 2003 — 2007
BS, Metallurgy and Materials Engineering
Experience
KTH Royal Institute of Technology October 2014 - Present
Stockholm University August 2014 - Present
Skills
Matlab, Semiconductors, Simulations, Spectroscopy, COMSOL, Nanotechnology, Experimentation, Microscopy, R&D, Surface Chemistry, Physics, LaTeX, Nanofabrication, Powder X-ray Diffraction, Nanomaterials, Microfabrication, Characterization, Research, Mathematica, Thin Films, Nanoparticles, AFM, Science, Materials Science, Materials, Electron Microscopy, Scanning Electron..., Chemistry, Electrochemistry
Mubasher Saleem
PhD Scholar
Research
Education
GIK Institute 2008 — 2010
Master of Science (MS), Electrical and Electronics Engineering
University of Engineering and Technology, Lahore 2004 — 2008
Bachelor of Science (BSc), Electrical and Electronics Engineering
Experience
Politecnico di Torino January 2012 - Present
GIK Institute June 2010 - January 2012
GIK Institute August 2009 - May 2010
Skills
Photolithography, BioMEMS, Microfabrication, Simulations, MEMS, Microfluidics, Labview, Sensors, Microtechnology, Matlab, Characterization, ANSYS, Design of Experiments
Mudasser Rasool
Young Talent service Engineer at TetraPak Packaging solutions S.P.A
Packaging and Containers
Education
University of Engineering and Technology, Lahore 2007 — 2011
Bachelor of Science (BSc), Electrical and Electronics Engineering
Experience
Tetra Pak Packaging solutions S.P.A, Italy November 2013 - Present
TetraPak Pakistan June 2011 - October 2013
Immatronics Engineering services September 2007 - January 2010
MicroTech Industries(pvt) Ltd. June 2006 - September 2007
Skills
Problem Solving, Operations Management, Engineering, Automation, Electrical Engineering, C, Customer Relations, Switchgear, Instrumentation, Preventive Maintenance, Maintenance Management, Sensors, PLC Programming, Control Systems Design, Microcontrollers, Troubleshooting
Muhammad A. Saleem Qureshi, PRINCE2 Practitioner
Consultant 3rd Line Transmission Support at Huawei Technologies
Telecommunications
Education
NWFP University of Engineering & Technology, Peshawar-Pakistan 2005 — 2007
MSc. Telecom Engineering Management, Engineering Management
University of Engineering and Technology, Lahore 1994 — 1999
B.Sc. Electrical Engineering (Major in Electronics & Communications), Major in Electronics & Communications
Islamia University, Bahawalpur 1991 — 1993
B.Sc, Physics, Mathematics
Experience
Huawei Technologies March 2013 - Present
Ericsson August 2010 - March 2013
Indigo Telecom Group October 2009 - August 2010
Clarent Enterprises July 2009 - September 2009
Huawei Technologies, Pakistan March 2006 - June 2009
Easy Phone (Pvt) Ltd Pakistan October 2001 - February 2006
Skills
Optical Fiber, SDH, Microwave, DWDM, Transmission, Provisioning, GSM, Managed Services, VoIP, Network Design, NSN, Fiber Optics, Switches, RAN, ATM networks, FTTx, IP, Computer Network..., NMS, Telecommunications, Broadband, 2G, BSS, Integration, Network Optimization, Open Source Software, MPLS, Rollout, WiMAX, 3G, Ethernet, UMTS, Wireless
Muhammad Abdullah Khan
PhD researcher at Chair of High Frequency Electronics (HFE) at RWTH Aachen University
Electrical/Electronic Manufacturing
Education
Rheinisch-Westfälische Technische Hochschule Aachen / RWTH Aachen 2010 — 2011
Master Thesis Student, RF Power Amplifiers
Kungliga tekniska högskolan 2008 — 2010
Master's Degree in System on Chip (SoC) Design with Specialization in RF (and Analog) Circuit Design
University of Engineering and Technology, Lahore 2003 — 2007
Bachelor's degree in Electrical Engineering with Specialization in Electronics and Telecommunication
LaSalle Higher Secondary School and College, Multan
Experience
RWTH Aachen University February 2013 - Present
IMMS gGmbH April 2011 - December 2012
KTH Royal Institute of Technology 2010 - 2011
Skills
Cadence Schematic..., RF Measurements, ADS Schematic and..., RFIC Design, CMOS, PCB Design
Muhammad Abdur Rahman
Support Coordinator at Climate and Development Knowledge Network
Management Consulting
Education
University of Cambridge 2013 — 2014
Master of Philosophy (MPhil), Engineering for Sustainable Development
University of Agriculture, Faisalabad 2008 — 2010
MBA, Marketing
University of Engineering and Technology, Lahore 2003 — 2006
B.Sc Computer Engineering, Telecommunication, Mobile Communication
Experience
Climate and Development Knowledge Network January 2015 - Present
Lead - Inspiring leaders for a sustainable world December 2014 - Present
Ministry of Planning, Development and Reforms June 2014 - September 2014
GoSense Wireless Ltd January 2014 - March 2014
Mobilink June 2011 - September 2013
Pakistan Mobile Communications Ltd January 2010 - June 2011
Mobilink January 2008 - December 2009
Mobilink (An Orascom Company) February 2007 - December 2007
Pakistan Telecommunication Company Limited June 2006 - August 2006
Skills
SS7, NMS, BSS, Links, Cellular Communications, Govern, Telecommunications, IP, Sustainable Agriculture, 2G, Legislative Policy, Testing, Open Source Software, PDH, Network Optimization, MapInfo, Rollout, MW, Sustainability, SDH, 3G, Project Management, GPRS, Core Network, Public Policy, GSM, Networking, Pathloss, Integration, Governance, Project Planning, QoS, WiMAX, Transmission, Technology Policy, Sustainable Development, Microwave Links, Renewable Energy, NEC, WBS, NSN, Troubleshooting, Microwave, ATM networks, Climate Change, Sustainable Energy, RF
Muhammad Adil Javed
Student Research Assistant at Institut für Werkzeugmaschinen
Civil Engineering
Education
University of Stuttgart 2011 — 2013
Masters of Science, Water Resources Engineering and Management
University of Engineering and Technology, Lahore 2007 — 2011
Bachelors of Science, Civil Engineering
Forman Christian College 2005 — 2007
F. Sc. (Higher School), Pre-Engineering
Experience
Institut für Werkzeugmaschinen March 2012 - Present
University of Stuttgart August 2011 - Present
UetBlogs.com July 2010 - January 2012
University of Engineering and Technology, Lahore September 2007 - August 2011
Forman Christian College, Lahore August 2005 - August 2007
Skills
Finite Element Analysis, AutoCAD Civil 3D, Project Planning, Hydraulics, EOR, Visual Basic, Civil Engineering, Primavera P6, Hydraulic Modeling, Water Management, Stress Analysis, Project Engineering, SAP2000, SAGD, Structural Analysis, Engineering Design, Engineering Management, Oil Sands, ANSYS, APDL, Wordpress, Structural Engineering, AutoCAD, Water, Groundwater Modeling, Hydrology, Geotechnical Engineering, Engineering, Watershed Management, CAD, MediaWiki, STAAD, Hydropower, Environmental..., Feasibility Studies, ArcGIS, Planning, Water Resources, MS Project, Construction Management, GIS, Hydraulic Design, ETABS, Modeling, Primavera, Flood Control, Microsoft Office, Photoshop, Groundwater, WordPress
Muhammad Adnan Azmat
RTDS/RSCAD Simulation Engineer at ABB HVDC.
Electrical/Electronic Manufacturing
Education
Chalmers tekniska högskola / Chalmers University of Technology 2010 — 2012
Master's degree in Electric Power Engineering, Electrical Power Engineering
University of Engineering and Technology, Lahore 2005 — 2009
Bachelor's degree in Electrical Engineering, Electrical Power, 3.83
Experience
ABB HVDC April 2013 - Present
Engineering Partner AB April 2013 - Present
ABB, Waves4Power, Chalmers March 2012 - November 2012
NFC Institute of engineering and Fertilizer Research January 2010 - August 2010
PTCL August 2008 - October 2008
Skills
Simulink, Power world, Visio, Digsilent, Electrical Engineering, Simulations, FICOXpress MP, Microsoft office Visio, PowerWorld, Power Systems, Matlab, Engineering, Power Electronics, PSpice, Microsoft Excel, RSCAD Modeling (HVDC..., Power Engineering, COMSOL, Power Transmission, PSCAD, Pspice, Microsoft Word, Power System Studies
Muhammad Ahmed Ali
Application Lead at 3 Sverige
Information Technology and Services
Education
KTH Royal Institute of Technology 2006 — 2008
Masters, Software Engineering of Distributed Systems, A
University of Engineering and Technology, Lahore 2003 — 2006
Bachelor's degree, Computer Science, A+
Experience
3 Sverige 2013 - Present
Appear Networks April 2008 - October 2013
Nostratic AB May 2007 - March 2008
Services Institute of Medical Sciences June 2006 - August 2006
Chartac Business Services June 2005 - August 2005
Skills
Java Enterprise Edition, OOP, Java, Distributed Systems, Agile, Tomcat, J2EE, Integration, TIBCO Business Studio, Ant, Software Development, IBM MQ, Apache Camel, Software Engineering, Mobile Applications, Subversion, JavaSE, Web Services, J2SE, XML, Linux, Web Development, JUnit, TIBCO Rendezvous, AJAX, MySQL, Oracle, CSS, JBoss Application Server, UML, Software Design, Scrum, JPA, Web Applications, SOA, Android, SQL, VB.NET, REST, Hibernate, Microsoft SQL Server, Agile Methodologies, JSP, Eclipse, SQL Server, HTML, JavaScript, jQuery, Spring, JBoss
Muhammad Ahsan Bashir
PhD Student at University Claude Bernard Lyon 1, France
Chemicals
Education
Aalto University 2010 — 2012
M.Sc Process Systems Engineering, Chemical/Polymer Engineering
University of Engineering and Technology, Lahore 2004 — 2008
B.Sc, Chemical Engineering specialization in Polymers
Experience
University Claude Bernard Lyon 1 November 2012 - Present
Borealis November 2011 - September 2012
Aalto University School of Science and Technology May 2011 - September 2011
COMSATS Institue of Information Technology, Lahore August 2009 - May 2010
Coats Pakistan September 2008 - August 2009
Skills
Matlab, Thermodynamics, Polymerization, Polyolefin Reactor..., Polymers, Chemical/Polymer..., Simulations, Reactor, Process Simulation, Reaction Engineering, Catalysis, Chemical Engineering, R&D, Polymer Science
Muhammad Ahsan Javaid
null Professional
Government Administration
Education
University of Leicester 2010 — 2011
MSc, Management
University of Engineering and Technology, Lahore 2005 — 2009
BSc, Electrical Engineering
Experience
Office for National Statistics 2011 - 2011
Babar Electric Company August 2009 - September 2010
Skills
IT Skills: Windows,..., Technical Software:..., Programming Language C,...
Muhammad Ahsan Mir
Engineering & Capital Systems Manager at Procter & Gamble UK
Consumer Goods
Education
University of Engineering and Technology, Lahore 2001 — 2005
B.SC Engg, Mechanical Engineering, 83%
Experience
Procter & Gamble June 2011 - Present
Procter & Gamble June 2007 - May 2011
Atlas Honda Limited December 2004 - April 2007
Skills
Continuous Improvement, Supply Chain Management, Process Simulation, Team Building, Analysis, Factory, Supply Chain..., Maintenance Management, MS Project, Operational Excellence, Operations Management, Manufacturing..., Kaizen, Quality Assurance, ISO, Lean Manufacturing, SAP, Leadership, Manufacturing, Process Engineering, Industrial Engineering, Quality System, Product Development, Process Control, Project Planning, 5S, TQM, Manufacturing Operations, Engineering Management, Procurement, Six Sigma, Project Management, FMEA, Project Engineering, Commissioning, TPM, Management, Quality Management, Production Planning, Root Cause Analysis, Cross-functional Team..., Engineering, Supply Chain
Muhammad Ali Imran
Reader in Communications at University of Surrey
Wireless
Education
PhD 2002 — 2007
Doctor of Philosophy (PhD), Electrical and Electronics Engineering
Imperial College London 2001 — 2007
Doctor of Philosophy (PhD), Communication Systems
University of Engineering and Technology, Lahore 1994 — 1999
Bsc, Electrical Engineering
Experience
University of Surrey June 2009 - Present
EARTH Project 2010 - 2012
KAUST 2010 - 2011
University of Surrey October 2006 - May 2009
And Or Logic 1999 - 2001
Skills
LTE, Mathematica, Mobile Communications, FPGA, Engineering, Machine Learning, Simulink, Simulations, C, Artificial Intelligence, Algorithms, Computer Vision, Cognitive Radio, VHDL, Student Supervision, Cellular Communications, Signal Processing, Wireless, Linux, Programming, Mathematical Modeling, Optimization, MIMO, MATLAB, Mobile Devices, Image Processing, Project Management, Embedded Systems, LaTeX, C++, Matlab, Digital Signal..., Pattern Recognition
Muhammad Ali Malik
Materials Specialist / Project Leader at IKEA
Plastics
Education
KTH Royal Institute of Technology 2004 — 2006
Master of Science (MS), Materials Sciences (Specialization in Nanomaterials & Nanotechnology)
University of Engineering and Technology, Lahore 1999 — 2003
Bachelor of Science (BS), Chemical Engineering
College Benghazi, Libya
Experience
IKEA January 2015 - Present
Borealis 2010 - 2014
Borealis 2007 - 2010
Linköping University 2006 - 2007
Skills
Leadership, Microsoft Office, Project Engineering, Negotiation, Microsoft Excel, Chemical Engineering, New Business Development, Factory, P&ID, Project Management, Petrochemical, Strategic Planning, Engineering
Muhammad Aqeel Ahmed
ERP Consultant
Computer Software
Education
University of Engineering and Technology, Lahore 2007 — 2009
MS (Computer Science), Computer Science, A
Allama Iqbal Open University 2002 — 2005
Master of Business Administration (MBA), Human Resources Management/Personnel Administration, General
Islamia University, Bahawalpur
Experience
SoftElec January 2015 - Present
Skills
Microsoft SQL Server, Software Project..., PL/SQL, Databases, Oracle
Muhammad Arslan Yousaf
Consulting Analyst at IHS
Electrical/Electronic Manufacturing
Education
Technical University Munich 2013 — 2015
Master of Science (M.Sc.), Power Engineering
University of Engineering and Technology, Lahore 2012 — 2014
Master of Science (MSc), Electrical Engineering
Bahauddin Zakariya University 2008 — 2012
Bachelor of Science (BSc), Electrical Engineering
Experience
IHS August 2015 - Present
Moscow Aviation Institute (State Technical University) (MAI) May 2015 - July 2015
BMW Munich Germany September 2014 - May 2015
University of Engineering and Technology Lahore, Pakistan February 2013 - August 2013
Skills
Management, Microsoft Word, Microsoft Office, Project Management, PowerPoint, Microsoft Excel, Customer Service, Leadership, Analysis, Engineering
Muhammad Asadullah
Student at TU Chemnitz, Germany
Nanotechnology
Education
Technische Universität Chemnitz 2014 — 2016
Master's degree, Micro and Nano Systems
University of Engineering and Technology, Lahore 2008 — 2012
Bachelor of Science (BSc), Electrical Engineering
Nusrat Jehan Academy 1994 — 2007
Experience
Skylite Communications August 2013 - September 2014
Delta Tech Global December 2012 - January 2013
Arbisoft September 2012 - December 2012
Skills
Teamwork, Public Speaking, Microsoft Word, PowerPoint, Social Media, Xilinx, Microsoft Excel, Research, C++, English, Customer Service, Microsoft Office, Matlab, Problem Solving, Team Leadership, Windows, Programming, C
Muhammad Asif Rafiq
Student at Technische Universität HamburgHarburg
Research
Education
Technische Universität Hamburg-Harburg 2007 — 2009
Master's degree, Materials Science
University of Engineering and Technology, Lahore 1999 — 2003
Bachelor of Engineering (B.E.), Materials Engineering
Experience
Universidade de Aveiro
Skills
Microsoft Office, Public Speaking, Research, PowerPoint, C, Statistics, English, Teamwork, Microsoft Word, Data Analysis, LaTeX, Microsoft Excel
Muhammad Asif Rafique
Java Developer bei Proximity Germany
Computer Software
Education
RWTH Aachen 2011 — 2014
University of Engineering and Technology, Lahore 2004 — 2008
2008, Computer Science
Experience
Proximity Germany November 2014 - Present
Aixigo AG January 2013 - October 2014
RWTH Aachen University March 2012 - December 2012
RedMath (Pvt.) Limited June 2008 - August 2011
Skills
Test Driven Development, Scrum, Eclipse, Agile Methodologies, AngularJS, Lucom Interaction..., MySQL, Git, iOS development, Web Services, Kanban, Java Enterprise Edition, JavaScript
Muhammad Asim shahzad
Student at Brandenburgische Technische Universität Cottbus
Education
Brandenburgische Technische Universität Cottbus 2012 — 2014
University of Engineering and Technology, Lahore 2007 — 2011
Bachelor's Degree, Electrical Engineering, A
Muhammad Atif Sharif
Business Analyst working in Purchasing Transformation Office at Jaguar Land Rover
Automotive
Education
Lahore University of Management Sciences 2008 — 2010
Master of Business Administration (MBA)
University of Engineering and Technology, Lahore 2000 — 2003
Bachelor of Engineering (BEng), Industrial Engineering
University of Engineering and Technology, Lahore
Master of Engineering (MEng), Engineering Management
Experience
Jaguar Land Rover 2012 - Present
Nestle Pakistan Limited July 2010 - December 2011
SPEL Pakistan January 2004 - May 2008
Skills
Strategic Sourcing, Continuous Improvement, Quality Control, Business Process..., Change Management, Production Management, Competitive Strategies, Supply Chain Management, Supply Chain, Strategic Planning, Internal Audit, Supply Management, Lean Manufacturing, Business Analysis, Business Transformation, Business Strategy
Muhammad Ayyaz Qureshi
RF Specialist HW I&V at Nokia
Telecommunications
Education
Technische Universität München 2010 — 2013
Doctor of Philosophy (Ph.D.), Near-Field Antenna Measurements
Universität Ulm 2008 — 2010
Master of Science (MSc), Communications Technology, ~85%
University of Engineering and Technology, Lahore 2002 — 2006
BSc Electrical Engineering, Electronics and Communication, 78%
Experience
Nokia November 2013 - Present
Symphony Teleca June 2013 - October 2013
Technische Universität München September 2010 - May 2013
University of Ulm March 2008 - May 2010
Nokia 2008 - 2010
Pakistan Mobile Communications Ltd 2006 - 2007
Skills
Antennas, 3G, Microsoft Office, Matlab, Testing, Sonnet, RF Engineering, C++, Cellular Communications, Wireless, C, UMTS, Agilent ADS, Mobile Communications, Simulations, Microwave, LTE, Optical Fiber, Signal Processing, LTE Advanced, Transmission, Programming, HSDPA, Field Test, GSM, CST Microwave Studio, Circuit Design, LaTeX, Microsoft Excel, RF
Muhammad Ejaz
CEng, MIMMM, MICorr, Corrosion Engineer/Materials Specialist at LR Senergy
Oil & Energy
Education
The University of Manchester 2004 — 2009
Doctor of Philosophy (PhD), Corrosion and Protection, Thesis submitted without any correction
Korea Advanced Institute of Science and Technology 2002 — 2004
Master of Science (MSc), Materials science and Engineering
University of Engineering and Technology, Lahore 1997 — 2001
Bachelor of Science (BSc), Metallurgical Engineering & Materials Science
Government Islamia College, Civil Lines, Lahore 1994 — 1996
FSc, Pre-Engineering, A
Experience
LR Senergy April 2014 - Present
ENGTEQ October 2012 - April 2014
CAN (Offshore) Ltd September 2010 - September 2012
Kinnaird College (UK) Ltd May 2009 - September 2010
Mughal Steel October 2001 - February 2002
Skills
Pipelines, ASME, RBI, Onshore, Oil/Gas, NDT, Corrosion, Piping, Inspection, Integrity Management
Muhammad Fahad Bashir
Lecturer at FASTNUCES
Civil Engineering
Education
Bauhaus-Universität Weimar 2011 — 2014
Master's Degree, Natural Hazards and Risks in Structural Engineering
University of Engineering and Technology, Lahore 2002 — 2006
Bachelor of Science (BS), Civil Engineering
Experience
FAST-NUCES July 2015 - Present
Sohaib Construction Co. March 2006 - Present
Bauhaus University Weimar October 2011 - March 2014
Skills
SAP2000, Structural Dynamics, Bridge, ANSYS, Earthquake Engineering, Structural Analysis, STAAD, Civil Engineering, Geotechnical Engineering, Finite Element Analysis, ETABS, Reinforced Concrete, Seismic Design, AutoCAD, Structural Engineering
Muhammad Farhan Ahmed
System Integration Consultant at Sonus Networks
Telecommunications
Education
University of Engineering and Technology, Lahore 2001 — 2003
Masters in Computer Systems Engineering, Computer Systems Engineering
unversity of engineering and technology lahore 1995 — 2000
Bachelor of Electrical Engineering, Communications
Experience
Sonus Networks July 2007 - Present
National Engineers September 2006 - June 2007
PTCL December 2002 - August 2006
Skills
AGCF, INAP, Enterprise Telephony, Hosted Services, SQL, Network Border Switch, Integration, SBC, Session Management, TCAP, DNS, IP, Telecommunications, Sun Certified Java..., Telecommunication..., Sonus, H248, voip, SOAP XML, Cloud based Solutions, Softswitch, Programming, MCSE 2003, Diameter, Media Ga, Sonus PSX, GSX, NBS,..., IP Telephony Design, ss7, Network Design, Policy Based Routing, Oracle, Routing and Translations, TDM, SIP-I, VoIP, IPv6, Least Cost Routing, SIP Trunking, IMS, Solaris, SS7, Telecomm Architectue..., SIGTRAN, Java, ENUM, Session Border..., SIP, Telephony, Databases, ISUP
Muhammad Farhan Mairaj
Project Manager – Highways (Tunnels & Structures) at Transport for London
Civil Engineering
Education
University of East London 2003 — 2005
MSc, Civil Engineering
University of Engineering and Technology, Lahore 1998 — 2002
BSc, Civil Engineering
F.G Degree College, Lahore 1995 — 1997
FSc (Equivalent to A-Levels), Maths, Physics, Chemistry, English etc
Experience
Transport for London October 2009 - Present
Atkins May 2006 - October 2009
Amey June 2005 - April 2006
Skills
Road, Engineering, Tunnels, Microsoft Project, Infrastructure, Feasibility Studies, Transportation..., Bridge, Traffic Engineering, Project Control, Highway Tunnels, Construction Management, Project Planning, Commercial Management, Program Management, Highway Design, CDM, Contract Management, Stakeholder Management, Traffic Management, Project Management, Rail, Drainage, Procurement, Highways, Civil Engineering, PRINCE 2, MS Project, Risk Assessment, PRINCE2
Muhammad Humayun
Power system engineer with experience of creative problem solving and project management.
Electrical/Electronic Manufacturing
Education
Aalto University 2010 — 2012
Master's of Science, Electrical Engineering / Power Systems and High Voltage Engineering
University of Engineering and Technology, Lahore 2003 — 2007
Bachelor of Science, Electrical Engineering / Power Systems
Experience
Aalto University School of Electrical Engineering September 2012 - Present
Aalto University School of Electrical Engineering May 2011 - May 2012
AL AHLEIA SWITCHGEAR CO. KSCC February 2008 - August 2010
Siemens June 2007 - January 2008
Skills
Research, Transmission, Energy Planning, LaTeX, Verilog, Optimization, Power Systems, Budgets, Assembly Language, Project Engineering, Transformer, Demand Response, Smart Grid, Energy, Power Distribution, Power System Operations, ETAP, GAMS, Microsoft Excel, Electrical Engineering, Java, Windows, Microsoft Office, Simulations, Programming, Simulink, Mathematical Modeling, Cost Planning, Procurement, Planning, Engineering, PLC, Matlab
Muhammad Humayun Mazhar
Consultant Technical Safety on behalf of Talisman Sinopec Energy UK Limited
Oil & Energy
Education
The University of Sheffield 2007 — 2008
M.Sc, Process Safety and Loss Prevention
University of Engineering and Technology, Lahore 2003 — 2007
B.Sc (Hons), Chemical Engineering
Experience
Talisman Sinopec Energy UK Limited June 2013 - Present
Abbotswell Engineering Ltd January 2012 - Present
AMEC January 2012 - June 2013
AMEC September 2008 - December 2011
BP June 2008 - September 2008
Skills
Planning, Factory, QRA, Construction Safety, EPC, Contractors, Incident Investigation, Offshore Projects, Engineering, SIS, Fault Tree Analysis, Gas, Reliability, Petroleum, Hazard Identification, Safety Analysis, Risk Analysis, HAZOP, Upstream, Risk Assessment, FPSO, Safety Management, Oil/Gas, Offshore, Oil, Risk, Hazard Analysis, Pipelines, Oil&Gas, HAZID, Detail Design, Operation, Offshore Drilling, Process Optimization, Chemical Engineering, Process Safety, Environmental Impact..., Risk Mitigation, Fire Safety, Compliance, Aspen HYSYS, Team Leadership, Quantitative Risk, Natural Gas, Detail Engineering, Safety Engineering, Fire Protection, Risk Management, FEED, P&ID
Muhammad Hussnain
Lecturer at COMSATS Institute of Information Technology
Information Technology and Services
Education
Kungliga Tekniska högskolan 2009 — 2011
M.Sc in Information and Communication Technology, Communication Technology
University of Engineering and Technology, Lahore 2003 — 2007
BE, Computer Engineering
Experience
COMSATS Institute of Information Technology September 2011 - Present
Ericsson May 2010 - October 2010
Lahore University of Management Sciences October 2007 - August 2009
Lahore University of Management Science's research lab October 2007 - August 2009
Skills
VC++, Java, Management, GSM, Network Communications, VOIP,Audio/Video..., Telecom Networks, Andriod, IPTV, JOOMLA (Web site..., GSM,3G,4G
Muhammad Ilyas Yousaf
Student at newcastle university
Higher Education
Education
University of Newcastle-upon-Tyne 2013 — 2014
Master of Science (MSc), Electrical and Electronics Engineering
University of Engineering and Technology, Lahore 2008 — 2012
bsc, electrical engineering
Skills
Power Plants, Electronics, Sensors, Matlab, Automation, Commissioning, Power Systems, Power Distribution, Electrical Engineering, Engineering, Microcontrollers, Control Systems Design, Energy
Muhammad Imran Arshad
Manufacturing Engineer at Jaguar Land Rover
Automotive
Education
University of Engineering and Technology, Lahore 2000 — 2003
Bachelor of Technology (Honours), Mechanical Auto & Diesel, FIRST CLASS HONOURS
Experience
Jaguar Land Rover November 2012 - Present
AUTOTECH ENGINEERING September 2008 - November 2012
MORLEY SLATER February 2008 - September 2008
Pak Suzuki Motor Company Limited August 1998 - January 2008
Skills
Automotive Engineering, FMEA, Strategic Planning, Manufacturing, •Special Prize in all..., Quality Management, Engineering, •Diploma in Program of..., Customer Service, Testing, Catia, Vehicles, Product Development, Quality Management..., Lean Manufacturing, Project Planning, Automotive, Process Improvement
Muhammad Imran Rafiq
Principal Lecturer at University of Brighton
Civil Engineering
Education
University of Surrey 2002 — 2005
PhD, Civil Engineering
University of Engineering and Technology, Lahore 1994 — 1999
BSc, Civil Engineering
Experience
University of Brighton February 2015 - Present
University of Brighton May 2013 - Present
University of Surrey September 2009 - January 2013
University of Surrey February 2005 - January 2013
NESPAK September 1999 - August 2000
Skills
Structural Engineers, Concrete, Geotechnical Engineering, Structural Health..., SAP2000, Structural Engineering, Earthquake Engineering, Deterioration modelling, Structural Analysis, Steel Structures, Simulations, Water Resources, ANSYS, Steel Design, Foundation Design, Structural Dynamics, MathCAD, STAAD, University Teaching, Numerical Analysis, Structural Reliability..., Engineering, Fortran, Abaqus, Pedagogy, Environmental..., Modeling, Mathematical Modeling, Finite Element Analysis, Civil Engineering, Matlab, Highways, Reinforced Concrete, Concrete Deterioration
Muhammad Iqbal Bashir
O&M
Oil & Energy
Education
University of Engineering and Technology, Lahore 2001 — 2006
B-Tech(Hons), Mechanical
Experience
MARAFIQ 2750MW IPR October 2012 - Present
ORIENT POWER 225MW CCPP January 2009 - September 2012
Skills
Control Room, Steam, Power Plants, Commissioning, Gas Turbines, Steam Turbines, DCS, Power Generation
Muhammad Iqbal Rana
Freelance Police Station Rep and Immigration Lawyer
Legal Services
Education
Northumbria University 2013 — 2014
Bachelor of Laws (LL.B.), Law
The Manchester Metropolitan University 2010 — 2012
Graduate Diploma in Law, Law
University of Engineering and Technology, Lahore 1986 — 1991
Bachelor of Engineering (B.Eng.), Mechanical Engineering
Experience
Accredited Police Station Representative October 2013 - Present
Iterpreting and Translating September 1992 - August 2014
Skills
Immigration Law, Legal Advice, Appeals, Criminal Law
Muhammad Irfan Kazim
Doktorand (PhD Student) at Linköping University
Electrical/Electronic Manufacturing
Education
Linköpings universitet 2004 — 2006
M.Sc Electrical Engineering, System-on-chip (SOCWARE)
University of Engineering and Technology, Lahore 1997 — 2001
B.Sc Electrical Engineering, Electrical, Electronics and Communications Engineering, Deans Honors List
Experience
Linköping University September 2011 - Present
Institute of Applied Technologies April 2006 - August 2011
Advanced Engineering Research Organization August 2001 - August 2004
Skills
Sensors readout, Mixed Signal, Electrical Engineering, Testing, Low-power Design, Pspice, Algorithms, ASIC, Sensors, Integrated Circuit..., ModelSim, PCB design, Embedded Systems, Electronics, Cadence Virtuoso, Semiconductors, Labview, C++, Digital Signal..., VLSI, Analog Circuit Design, Analog, Verilog, Simulations, C, Simulink, Microcontrollers, Matlab, VHDL
Muhammad Junaid Ayub
Maths Supply Teacher/Cover supervisor
Warehousing
Education
Preston University 2009 — 2011
B-tech (hons), Mechanical Engineering, A
University of Engineering and Technology, Lahore 2005 — 2009
B-tech, Auto & Diesel, B
Govt College Of Technology 2002 — 2005
Diploma of Associate of Engineering, Automotive Engineering Technology/Technician
Board of Intermediate and Secondary Education 1997 — 2002
High School
Experience
State school January 2015 - Present
Best tutors September 2014 - Present
Jsaco February 2014 - Present
Prince Cash and carry & NY London February 2013 - November 2013
LTC Distributotrs Ltd January 2010 - February 2013
Suzuki Motor House March 2004 - August 2006
Skills
Automotive Repair, Instrument Control, AutoCAD, Training, Computer Maintenance, Vehicle Dynamics, Mathematical Modeling, Project Management, Computer Diagnostics, Power Generation, Vehicle Maintenance, Mathematics, Microsoft Excel, Supervision, Wireless Networking, Engineering, Teaching, Project Planning, MS-DOS, Motor Vehicle
Muhammad Junaid Butt
Customer Project Manager @ Ericsson UK (Region Western & Central Europe)
Telecommunications
Education
University of Engineering and Technology, Taxila 2002 — 2004
MSc, Engineering Management (CASE campus)
University of Engineering and Technology, Lahore 1996 — 2000
BSc, Electronics Engineering
Experience
Ericsson UK July 2013 - Present
Ericsson Ireland September 2012 - July 2013
Ericssson January 2011 - July 2012
Ericsson - Iran April 2009 - December 2010
Ericsson - Nigeria July 2006 - April 2009
Ericsson - Pakistan October 2004 - February 2006
Warid Telecom - Pakistan 2006 - 2006
Ufone September 2000 - April 2004
Mobilink 2004 - 2004
Skills
Service Delivery, BSS, PMP, Telecommunications, Project Management, IP, WCDMA, Core Network, Transmission, ITIL, Pre-sales, Switches, SS7, Open Source Software, GPRS, GSM, 3G, Mobile Devices, UMTS, LTE, Computer Network..., VAS, 2G, Integration
Muhammad Mateen, PMP
Project Management specialist
Mechanical or Industrial Engineering
Education
Northumbria University 2014 — 2015
Master of Science (MSc), Project Management
Chalmers University of Technology 2013 — 2015
Master of Science (MSc), International Project Management
University of Engineering and Technology, Lahore 2007 — 2011
BSc. Industrial & Manufacturing Engineering
Experience
Engro Foods Limited October 2011 - August 2013
Procter & Gamble February 2010 - February 2010
Skills
FMCG, Production Planning, PESTEL Analysis, Engineering, Self-motivated Team..., Project Management, GMP, Procurement, Preventive Maintenance, Factory, Teamwork, Change Management, Maintenance Management, Project Planning, Commissioning, Risk Management, Continuous Improvement
Muhammad Mujtaba Abbas
Associate Lecturer at Lahore Leads University
Mechanical or Industrial Engineering
Education
Instituto Superior Técnico 2013 — 2014
Master's degree, Renewable energy, Good
Karlsruhe Institute of Technology (KIT) 2012 — 2014
Master in Entech, Renewable and thermal, Good
University of Engineering and Technology, Lahore 2008 — 2012
Bachelor's degree, Mechanical Engineering, A+
Experience
Lahore Leads University February 2015 - Present
Karlsruhe Institute of Technology (KIT) / University of Karlsruhe (TH) October 2012 - December 2014
KIC InnoEnergy October 2012 - December 2014
Karlsruhe Institute of Technology (KIT) / University of Karlsruhe (TH) March 2014 - September 2014
Instituto Superior Técnico September 2013 - September 2014
Descon Engineering Limited June 2010 - July 2010
Skills
ANSYS, Power Plants, Solidworks, combine cycle power..., Labview, Matlab, SolidWorks, Finite Element Analysis, LabVIEW, Thermodynamics, CFD, Catia, Microsoft Excel, Robotics, Project Planning, AutoCAD, Microsoft Office, Abaqus, Heat Transfer, Solid Edge, Primavera P6, CAD, Project Engineering, Inventor, Engineering, Pro Engineer, Photoshop, Engineering Design, Energy, Simulink, Fluid Mechanics, Simulations, Renewable Energy, Mechanical Engineering, PTC Creo, AutoCAD Mechanical, Engineering Management, HVAC, simulation power plant...
Muhammad Muzamal
PhD Student at Chalmers University of Technology
Research
Education
Chalmers University of Technology 2009 — 2011
Master in Innovative and Sustainable Chemical engineering, Chemical Engineering, 4.5/5
University of Engineering and Technology, Lahore 2004 — 2008
Bachelor of Engineering (BEng) Honors, Chemical Engineering, 80/100
Experience
Chalmers University of Technology September 2011 - Present
Skills
R&D, Science, Engineering, Materials Science, Research in Chemical..., Matlab, C++, Characterization, Spectroscopy, Research, Nanotechnology, Mathematical Modeling, Simulations, Chemical Engineering
Muhammad Naeem Arshad
Computer Software Developig & Testing Professional
Computer Software
Education
KTH Royal Institute of Technology 2006 — 2008
Master, Software Engineering Distributed Systems
University of Engineering and Technology, Lahore 2001 — 2004
Bachelor, Computer Science
Muhammad Naeem Ullah
Process Engineer at Eni
Oil & Energy
Education
National University of Science and Technology 2008 — 2012
Master of Science (MSc), Engineering/Industrial Management
University of Engineering and Technology, Lahore 2003 — 2007
Bachelor of Science (BSc), Chemical Engineering
Experience
Eni April 2014 - Present
BHP Billiton February 2012 - March 2014
OMV September 2007 - January 2012
Skills
Gas, Troubleshooting, SIL, Process Control, Upstream, Project Engineering, Process Simulation, Process Engineering, Commissioning, Process Improvement, Process Safety, Process Optimization, Root Cause Analysis, P&ID, HAZOP Study, Petrochemical, HAZOP, Oil & Gas, Risk Assessment, Petroleum, Engineering, EPC
Muhammad Nasrullah
PhD Researcher at Aalto University, Finland
Research
Education
Aalto University Finland, School of Science and Tecnology 2007 — 2010
Master of Science in Process and Sysytem Engineering, Plant Design
University of Engineering and Technology, Lahore 2001 — 2005
Bachelor of Scince, Chemical Engineering
Experience
VTT Technical Research Centre of Finland October 2010 - December 2014
VTT May 2008 - December 2009
Packages Pvt. Lahore, Pakistan June 2005 - August 2007
Skills
Simulations, Characterization, Chemistry, Heat Transfer, R&D, Science, Reaction Engineering, Matlab, Materials Science, Catalysis, Aspen Plus, Mathematical Modeling, Renewable Energy, Thermodynamics, Research, Microsoft Office, Biomass, Modeling, Biofuels, Chemical Engineering, Process Simulation, Polymers
Muhammad Qadeer
Materials Specialist
Research
Education
Chalmers tekniska högskola 2004 — 2006
Masters in Advanced Materials, Metallurgy
University of Engineering and Technology, Lahore 1995 — 2000
BSc. Metaluurgical Engineering and Materials Science, Metallurgical Engineering
Experience
KTH December 2007 - January 2013
KTH 2007 - 2012
Skills
Scanning Electron..., Failure Analysis, Corrosion, NDT, Experimentation, Physics, Engineering, Microscopy, R&D, Numerical Analysis, Thin Films, Fortran, Nanomaterials, Mathematical Modeling, Polymer Characterization, Science, Materials Science, Nanotechnology, Polymer Science, Characterization, Composites, Metallurgy, Mechanical Testing, Materials, Matlab, Thermal Analysis, Polymers, Chemistry, Material Selection, Welding
Muhammad Raheel
Looking for a job in the field of Quality Assurance, Quality Management or Consultant in Automotive Sector
International Trade and Development
Education
Technische Universität Bergakademie Freiberg 2011 — 2014
International Management of Resources & Environment, Masters of Business Administration
University of Engineering and Technology, Lahore 2005 — 2009
B.E, Metallurgical & Materials Engg
HSSC Fazaia Intermediate College 2002 — 2005
Higher Secondary School Certificate, Pre Engineering Group. Majors: Maths, Physics, Chemistry, A
Experience
HELLA May 2014 - September 2014
HELLA October 2013 - March 2014
TU Bergakademie Freiberg July 2012 - September 2012
Friedrich Alexander University Erlangen-Nürnberg October 2010 - July 2011
Excel Engineering July 2009 - November 2009
OGDC Group Of Companies July 2008 - August 2008
Skills
Report Writing Skills, Materials Science, Inspection, Controlling, Analysis, ISO 9001, Quality assurance tools, Teamwork, Coatings, NDT, Quality Control, Microsoft Word, ISO/TS 16949, 8D Problem Solving, Project Management, Environmental Mangement..., Microsoft Excel, Sustainable Development, Characterization, ISO 14001, Thin Films
Muhammad Saad Ali
M.Sc. Student Advanced Materials and Processes
Nanotechnology
Education
Friedrich-Alexander-Universität Erlangen-Nürnberg 2012 — 2015
Master of Science (MSc) Hons., Advanced Materials and Processes, 1.1
University of Engineering and Technology, Lahore 2008 — 2012
BSc, Metallurgical and Materials Engineering, CGPA: 3.64/4.00
Lahore College of Arts and Sciences (LACAS) 2006 — 2008
A Level, Physics, Chemistry, Mathematics, Economics
Experience
BASF August 2014 - January 2015
Pakistan Standards & Quality Control Authority (Ministry of Sci. & Tech., Govt. of Pakistan) (PSQCA) August 2011 - August 2011
Pakistan Council of Scientific and Industrial Research (PCSIR) August 2010 - August 2010
SENSYS August 2009 - August 2009
Skills
Matlab, Nanomaterials, Engineering, Biomaterials, Scanning Electron..., Presentations, Nanotechnology, Microscopy, Materials Science, Research, Nanoparticles, Mechanical Testing, Microsoft Office
Muhammad Saleh Rashid
Graduate Teaching Assistant at Middle East Technical University, Northern Cyprus Campus
Higher Education
Education
University of Engineering and Technology, Lahore 2008 — 2012
BSC, Electrical engineering, 3.35
Swedish institute of technology gujranwala 2004 — 2007
Diploma in Electrical Engineering, Electrical, 83.77
St.joseph Engish High School GUJ 1994 — 2004
MATRIC, Science, 75.53
Middle East Technical University Northern Cyprus Campus 2015 — 2017
Master's in Sustainable Energy and Environment System, Sustainable Energy, --
Experience
Middle East Technical University NCC February 2015 - Present
Rasheed Panels Gujranwala June 2013 - February 2015
Descon Intregated Projects Pvt Ltd (DIPL) December 2012 - June 2013
NTDC July 2012 - August 2012
Rasheed Panels Gujranwala January 2003 - June 2012
GEPCO WAPDA July 2010 - August 2010
Skills
Power Plants, Pumps, Manufacturing, Gas Turbines, Control Valves, Boilers, Petrochemical, Matlab, PCB design, Power Distribution, P&ID, Generators, Digital Electronics, Factory, Automation, Commissioning, Preventive Maintenance, Pspice, Control Systems Design, Electric Power, Instrumentation, Multisim, Labview, EPC, Keil, Power Generation, C++, HAZOP, Inspection, DCS, Process Control, Troubleshooting, Electricians, Modbus, PLC, Transformer, Gas, Air Compressors, C, Calculations, ETAP, Power Systems, Proteus, SCADA, FEED, Orcad, Relays, Switchgear, Project Engineering, Maintenance Management
Muhammad Saqib Shahzad
Trainee Engineer at Industrial Systems Integrators
Industrial Automation
Education
Technische Universität Hamburg-Harburg 2008 — 2013
Master of Science (M.Sc.), Mechatronics
University of Engineering and Technology, Lahore 2003 — 2007
Bachelor of Science (B.Sc.), Mechatronics and Control Engineering
Experience
Industrial Systems Integrators March 2015 - Present
Hamburg University of Technology August 2011 - November 2011
Hamburg University of Technology May 2009 - November 2010
Skills
Microsoft Project, Regelungstechnik, Genetic Algorithms, LaTeX, Robotics, Embedded C, Simulations, Technical Acoustics, Neuro-fuzzy Systems, Modeling, Distributed Real-Time..., Artificial Neural..., Control Engineering, Matlab, Simulink, Embedded Systems, Fuzzy Systems, Java, Hardware In Loop..., Robust Control
Muhammad Shoaib Malik
Multi Mission Spacecraft Controller at ESOC/ESA
Aviation & Aerospace
Education
Cranfield University 2011 — 2012
MSc, Astronautics & Space Engineering
Technische Universität München 2009 — 2011
EuMAS, Aerospace Engineer
University of Engineering and Technology, Lahore 2004 — 2008
BSc, Mechatronics & Control Engineering
Experience
Telespazio VEGA Deutschland GmbH November 2012 - Present
Cranfield University August 2011 - June 2012
German Aerospace Center June 2011 - October 2011
Technical University Munich October 2009 - August 2011
German Aerospace Center April 2011 - May 2011
University of Engineering and Technology, Lahore September 2004 - August 2008
Skills
Analysis, Satellite Tool Kit, Aerodynamics, Requirements Analysis, Simulink, Aerospace, Satellite, 8051 Microcontroller, PLC Allen Bradley, Embedded Software, Embedded Systems, Automation, PIC, CATIA V5, MPLAB, AutoCAD, Spacecraft, Mission Analysis, MS Office Suite, Matlab, CAD/CAM, Microsoft Office, PLC Programming, Atmel 89C51, Simulations, Solid Edge, STK, Orbital Mechanics, Catia, atmel, Microcontrollers, Simulation, Propulsion, PLC Ladder Logic, Pspice, RSLogix, Keil, MySQL, LaTeX, Aerospace Engineering, Space Systems, Microchip PIC, C++, Computational Modeling, Systems Engineering
Muhammad Tahir Nazir
Project Manager at IAV GmbH
Automotive
Education
The University of Tokyo 2006 — 2008
M.Sc Engineering, Mechano-Informatics
University of Engineering and Technology, Lahore 2001 — 2004
B.Sc Engineering, Mechatronics Engineering
Jadeed Dastgir Ideal School 1998 — 2000
Matriculation, Science
Experience
IAV GmbH October 2014 - Present
Bosch September 2013 - September 2014
Bosch April 2009 - September 2014
Toyota Motor Corporation September 2012 - August 2013
Toyota Motor Corporation September 2011 - August 2012
Skills
Automobile, Software Requirements, Project Coordination, Control Systems Design, Customer Experience, Automotive Engineering, Requirements Gathering, Electronic Control..., Powertrain, Electro-mechanical, Project Engineering, Requirements Analysis, Technical Product Sales, System Testing, System Requirements, Vehicles, Systems Engineering, Functional Requirements, Embedded Systems, Automotive, Electronics, Requirements Management, Project Management, Requirement...
Muhammad Tausif
Managing Director, TA International Ltd
Mechanical or Industrial Engineering
Education
University of Engineering and Technology, Lahore 1989 — 1992
Bachelor of Mechanical Engineering (BEng), Mechanical Engineering, Honors
Experience
TA International Ltd January 2001 - Present
Celestica May 1998 - December 2001
TARIQ ENGINEERING PVT LTD August 1993 - March 1998
Skills
Management, Manufacturing, Lean Manufacturing, Product Development, ISO, New Business Development, Injection Molding, Mechanical Engineering, Materials, Automotive, Negotiation, Sales Management, Continuous Improvement, Engineering
Muhammad Umair Tanvir
Drilling Solutions/Sales Engineer at National Oilwell Varco
Oil & Energy
Education
University of Engineering and Technology, Lahore 2000 — 2003
BSc, Mechanical Engineering
OFS 1 Dubai
Experience
National Oilwell Varco Wellbore Technologies February 2012 - Present
BP North Sea April 2011 - November 2011
Expro March 2009 - March 2011
Halliburton Sperry North Sea Ltd August 2007 - March 2009
Schlumberger Reservoir Evaluation & Wireline April 2005 - August 2007
Oil & Gas Development Company Ltd. Pakistan September 2003 - April 2005
Skills
Upstream, Pressure, Hydraulics, Field Development, Logging, Drilling, Oil & Gas, Cement, Well Testing, Petroleum Engineering, Petrophysics, Oil & Gas Industry, Completion, Oilfield, Offshore Drilling, Log Analysis, Drilling Engineering, Reservoir Management, Formation Evaluation, Product Optimization, Offshore Operations, Completions, Onshore, QHSE, Production Engineering, Geology, Wireline, Well Control, Tubing, Stimulation, Oil/Gas, Directional Drilling, LWD, Petrel, Reservoir Engineering
Muhammad Umar Iqbal
M.Sc. Computational Mechanics at Technische Universität München
Civil Engineering
Education
University of Engineering and Technology, Lahore 2006 — 2010
BSc, Civil Engineering
Govt. Islamia College 2004 — 2006
FSc, Pre Engineering
Govt. Central Model 2000 — 2004
Matric, Science
Experience
Technische Universität München October 2013 - Present
HEC / DAAD April 2013 - Present
National Engineering Services Pakistan Pvt. Ltd. December 2010 - July 2013
Engineering Project Development Consultants (PVT) Lahore July 2009 - August 2009
Skills
Visual Basic, Data Processing, Microsoft Office, Excel VBA, Structural Analysis, Quick Basic, HEC6KC, Xbox 360, Earthworks, AutoCAD, Civil Engineering, Geotechnical Engineering, Microsoft Excel, Highways, Water Resources, Data Analysis, Playstation 3, STAAD, VBA, Road, SAP2000
Muhammad Umar Khan
PhD Student at Tyndall National Institute
Research
Education
University College Cork 2012 — 2016
Doctor of Philosophy (Ph.D.), Photonics
University of St. Andrews 2010 — 2011
Master’s Degree, Photonics, 17/20
Kungliga tekniska högskolan 2009 — 2010
Master’s Degree, Photonics
University of Engineering and Technology, Lahore 2008 — 2010
M.Sc, Electronics & Communication Engineering
University of Engineering and Technology, Lahore 2003 — 2007
Bachelor’s Degree, Electrical (Electronics & Communication) Engineering, A+ (82%)
Experience
Tyndall National Institute June 2012 - Present
COMSATS Institute of Information Technology September 2011 - June 2012
PowerSoft19 (Pvt) Limited March 2009 - September 2009
Lahore University of Management Sciences January 2009 - April 2009
Lahore University of Management Sciences January 2007 - February 2009
Palmchip September 2007 - August 2008
Skills
Verilog, Signal Processing, C, Simulations, Nanofabrication, Hardware Architecture, Embedded Systems, Programming, Xilinx, FPGA, Image Processing, C++, Computer Vision, Electronics, Java, Microcontrollers, Matlab, Digital Signal..., VHDL
Muhammad Umer Prince
MSc Student at Bradenburgische Technische Universität
Oil & Energy
Education
Bradenburgische Technische Universität Cottbus 2011 — 2013
Master of Science (MSc), Power Engineering
University of Engineering and Technology, Lahore 2006 — 2010
BSc, MECHANICAL
Experience
Bradenburgische Technische Universität October 2011 - Present
OGC ORIENT ELECTRONICS (PVT) LIMITED September 2010 - August 2011
Skills
Manufacturing, AutoCAD, Project Engineering, Plant Maintenance, Project Planning, Engineering, Maintenance Management, Solid Edge, Team Management, SAP, Supply Chain Management, Materials Management, Piping, Procurement, Commissioning
Muhammad Usman
LTE/LTEA System Verification Engineer, Team Lead SV Stability at Ericsson AB
Telecommunications
Education
KTH Royal Institute of Technology 2009 — 2011
Masters in Communication Systems, Wireless Networks
University of Engineering and Technology, Lahore 2004 — 2008
B.Sc Electrical Engineering, Telecommunication & Electronics
Experience
Ericsson AB August 2011 - Present
Huawei February 2011 - August 2011
Nokia Siemens Networks August 2008 - August 2009
Nokia Siemens Networks August 2007 - August 2007
SIEMENS Pakistan. Engg. Co. Ltd July 2007 - July 2007
Skills
TCP/IP, Wireless, GPRS, Networking, LTE, VoIP, Computer Network..., TEMS, HSPA, Wireless Networking, UMTS, Network Operations, Testing, RAN, RF, Project Coordination, 3G, Linux, IP, WCDMA, Matlab, WiMAX, GSM, Java, Core Network, Intelligent Networks, SS7, Mathematica, 2G, 3GPP, Integration, BSS, Network Optimization, Simulations, Telecommunications, NSN
Muhammad Usman Bashir
Leader RNO Department Region (North East) at Huawei (Germany)
Telecommunications
Education
University of Engineering and Technology, Lahore 2003 — 2007
BSC Electrical Engineering, Telecommunication
Experience
Huawei (Germany) September 2014 - Present
Huawei (Germany) January 2012 - August 2014
Huawei(Egypt) September 2011 - January 2012
Alcatel-lucent Egypt January 2011 - September 2011
Alcatel-Lucent Pakistan May 2007 - December 2010
Huawei January 2007 - May 2007
Mobilink 2007 - 2007
Skills
TEMS, LTE, TEMS Investigation, PRS, WCDMA, MapInfo, Rhodes and Schwarz, M2000, Key Performance..., Java, NPO, Optimizations, 2G, CME, FMA, NPA, Nastar, Actix, KPI, UNET, 3G, Network Optimization, Microsoft Office, Mapper, RNO, Optimization
Muhammad Usman Butt
Project Manager at BFG INTERNATIONAL group
Mechanical or Industrial Engineering
Education
IFAM Fraunhofer, Germany 2013 — 2013
EAS----European Adhesive Specialist, Adhesives Bonding and DIN6701
University of the Punjab, Lahore 2007 — 2008
PGD, Total Quality Management
University of Engineering and Technology, Lahore 2003 — 2007
Bsc Mechatronics and Control Engineering, Mechatronics Engineering
Government College University, Lahore 2000 — 2002
Intermediate, Pre Engineering, A+
Army Burn Hall College Abottabad 1999 — 2000
Matriculation, Sciences, A+
Experience
BFG INTERNATIONAL group July 2010 - Present
National Productivity Organization(NPO) Ministry of Industries and Production, Govt of Pakistan November 2009 - March 2010
Pak Elektron Limited October 2008 - November 2009
HKF Engineering January 2007 - April 2008
HKF July 2004 - August 2004
Skills
Project Management, Observation, Engineering, Management, Product Development, Open Minded, MS Project, Team Management, Teamwork, Manufacturing, Operations Management, TQM, Procurement, Analysis, Quality Management, Iso 9000, ISO, Project Engineering, Quality Control, PMP, Quality Assurance, Project Planning, Training, Contract Management
Muhammad Waqar Aslam
Research Student at The University of Liverpool
Higher Education
Education
University of Liverpool 2009 — 2013
PhD, Electrical Engineering
University of Engineering and Technology, Lahore 2003 — 2007
BSc Electrical, Electrical Engineering
Experience
The University of Liverpool January 2009 - Present
MUST Mirpur Azad Jammu & Kashmir January 2008 - September 2008
Skills
Machine Learning, Simulations, LaTeX, Research, C++, Electronics, Signal Processing, Matlab, Simulink, Electrical Engineering, Mathematical Modeling, Digital Signal..., Pattern Recognition, C, Simulation
Muhammad Zain Mushtaq
Master Degree Student
Civil Engineering
Education
Technical University Munich 2013 — 2015
M.Sc Advanced Construction & Building Technology, Building Construction Technology
University of Engineering and Technology, Lahore 2006 — 2010
B.Sc Civil engineering, Civil Engineering, 3.396/4.0 (US Based)
Experience
Engineering Consultancy Services Punjab (Pvt) Ltd August 2012 - November 2013
Water and Power Development Authority Pakistan August 2011 - August 2012
Pakarab Fertilizers (pvt) Ltd September 2010 - August 2011
Allied engineering Consultants August 2010 - September 2010
Punjab Irrigation & Power Department July 2009 - August 2009
Skills
Revit, C++, Project Planning, HEC-RAS, Primavera P6, Matlab, Geotechnical Engineering, COMSOL, Autocad, Advanced Construction..., Google Sketchup, Microsoft Office
Muhammad Zeeshan Mughal
Postdoctoral Research Fellow at Università degli Studi Roma Tre
Nanotechnology
Education
University of Engineering and Technology, Lahore 2006 — 2008
Master of Science, Metallurgy and Materials Engineering
Experience
Università degli Studi Roma Tre September 2014 - Present
PCSIR Laboratories Complex January 2014 - July 2014
University of Ulster June 2013 - December 2013
University of Ulster October 2009 - June 2013
PCSIR October 2004 - October 2009
Skills
Nanotechnology, Surface Chemistry, AFM, TEM, Materials Science, Characterization, Microscopy, Nanomaterials, Biomaterials, Thin Films, Nanofabrication, FIB, Electron Microscopy, Nanoparticles, FTIR, Raman Microscopy, Experimentation, Spectroscopy, Surface Engineering, Scanning Electron..., SEM
Muhammad Zubair Salman
Optical Network Development Engineer at Amazon
Telecommunications
Education
Alcatel Lucent, Dubai, United Arab Emirates 2014 — 2014
Training for ALU WDM Products, Coherent OTN Planning and Maintenance
Huawei University, Dubai, United Arab Emirates 2014 — 2014
Training for Huawei Coherent Product Design and Maintenance
Huawei University, Dubai, United Arab Emirates 2013 — 2013
Training with R&D Expert of Huawei
Corvit Systems, Lahore, Pakistan 2010 — 2010
MPLS Training, MPLS and Routing Protocols
Huawei University, Islamabad, Pakistan 2010 — 2010
Product Training, Huawei OSN Series Commissioning and Maintenance
Corvit Systems, Lahore, Pakistan 2009 — 2010
CCNA Training, Switching and Routing
Huawei University, Cairo, Egypt 2008 — 2008
Product Training, Huawei SDH & DWDM
People Perfect,Lahore, Pakistan 2008 — 2008
Training, Positive Attitude Towards Work
Huawei University, Lahore, Pakistan 2007 — 2007
Product Training, Huawei SDH & DWDM
University of Engineering and Technology, Lahore 2003 — 2007
Bachelor of Science (BSc) in Electrical Engineering, Telecom and Electronics
Experience
Amazon July 2015 - Present
Tangent Innovation October 2012 - July 2015
Tangent Innovation October 2010 - October 2012
China Mobile Pakistan (Zong) July 2009 - September 2010
Wateen Telecom Pvt. Ltd. September 2007 - June 2009
Skills
Fiber Optics, MW, NMS, QoS, Ethernet, OPA, OSPF, ASON, Troubleshooting, RIP, DWDM, T2000, Telecommunications, PDH, Analytical Skills, Routers, MPLS, Team Management, 3G, Microwave, GSM, Networking, U2000, Routing, SDH, VoIP, IP, NOC, OTN, BSS, 2G, Optical Fiber, Cisco Technologies, Transmission
Muhammad naveed tariq
Student at University of Engineering and Technology, Lahore
Oil & Energy
Education
University of Engineering and Technology, Lahore 2005 — 2009
Muhammed Athar
Team Leader Commissioning group at ABB
Electrical/Electronic Manufacturing
Education
University of Engineering and Technology, Lahore 1977 — 1982
Bachelor of Engineering (B.Eng.), Electrical Power System, B
Experience
ABB April 2008 - Present
ABB April 2008 - Present
ABB August 2006 - April 2008
Skills
Commissioning, Power Distribution, Instrumentation, Switchgear, DCS, Power Generation, Transformer, Quality Control, Engineering, Power Systems, Substation, Electricians, Power Plants, Electrical Engineering, Automation, Project Engineering
Munawar Butt
Global Services Manager
Oil & Energy
Education
University of Engineering and Technology, Lahore 1975 — 1980
Electrical Engineering, Electrical Eng, Electronics, Digital Systems
Experience
Schlumberger September 2011 - Present
Schlumberger October 2010 - June 2011
Schlumberger August 2009 - September 2010
Schlumberger August 2007 - July 2009
Schlumberger September 2004 - July 2007
Schlumberger (DCS) July 2001 - July 2004
Schlumberger November 1991 - June 2001
Schlumberger July 1998 - October 1999
Schlumberger July 1995 - June 1998
Schlumberger October 1988 - June 1995
Skills
Upstream, Management, Offshore Operations, Reservoir Management, Petroleum Geology, Project Management, Petrophysics, Formation Evaluation, Oilfield, Data Acquisition, Stimulation, Business Development, Field Development, Gas, Field Operations, Global Marketing, Production Engineering, Oil/Gas, Techlog, Pressure, Offshore Drilling, Geophysics, Product Optimization, QHSE, Geology, Onshore, Characterization, Directional Drilling, Log Analysis, Fluids, Oil & Gas Industry, Human Resource..., Drilling, Logging, Reservoir Engineering, Well Testing, Petroleum, Petroleum Engineering, Leadership, Cement, Global Management, Energy Industry, Structural Geology, Energy, Human Resource Planning, Sedimentology, Earth Science, Operations Management, Wireline, Oil & Gas
Muneeb Alam
Graduate Student of Electrical Power Engineering at RWTH Aachen University
Research
Education
University of Engineering and Technology, Lahore 2009 — 2013
Bachelor's Degree, Electrical (Power) Engineering
Punjab College of Science Lahore 2007 — 2009
FSc, Pre Engineering, A+
Spring Field Public School 2005 — 2007
Matric, Science, A+
Experience
RWTH Aachen University September 2015 - Present
Fauji Fertilizer Company Limited September 2014 - August 2015
Fauji Fertilizer Company Limited September 2013 - August 2014
SUPCON Automation Lab July 2012 - August 2012
Skills
Programming, Transformer, Microsoft Excel, Matlab, Microsoft Project, Commissioning, PowerPoint, PWS, Simulink, Teamwork, Power Generation, Switchgear, Microsoft Word, MS Project, C, ETAP, SAP Netweaver, Testing of Relays
Munir Ahmad Malik
Computer Networking Professional
Computer Networking
Education
Edinburgh Napier University 2012 — 2013
Master of Science (M.Sc.), Advance networking
Soth Thames college, Wandsworth,London 2011 — 2012
DIPLOMACity and Guilds, Electronics and Computer Systems
University of Abertay Dundee 2011 — 2012
B.Sc., Applied Networking Technologies
Westminster University 2007 — 2008
CCNA, Cisco Networking
City & Guild 1999 — 1999
Diploma, Electonics and computer system
South Thames College London 1998 — 1999
DIPLOMACity and Guilds, The Training and Business Group, London
South Bank University, London 1994 — 1996
PG diploma, Information System Engineering
University of Engineering and Technology, Lahore 1983 — 1988
BSc, Mechanical Engineering
Edinburgh Napier University
Experience
IFONETELECOM March 2003 - December 2008
ATRIUM COMMUNICATIONS LTD., London January 1997 - January 2003
Harpblake Ltd January 1996 - January 1997
Skills
Routers, Cisco Nexus, HSRP, NAT, Cisco ASA, WLAN, VLAN, DHCP, Cisco Certified, Active Directory, IP Networking, STP, Frame Relay, Firewalls, Wireless Networking, Cisco devices, Catalyst Switches, Cisco Switches, VTP, VPN, PPP, VoIP, Network Administration, WAN, EIGRP, Cisco IOS, Cisco Call Manager, Cisco, PIX, IPSec, TCP/IP, DNS, RSTP, Cisco Technologies, Routing Protocols, MPLS, IP, Cisco Routers, Network Security, RIP, Routing, Switches, OSPF, LAN/WAN, CCNP, CCNA, Cisco Security, BGP, LAN-WAN, VRRP