Institut national des Sciences appliquées de Strasbourg, France
L'Insa de Strasbourg est un établissement public à caractère scientifique culturel et professionnel (EPSCP). L'école, dont les origines remontent à 1875, a rejoint le groupe Insa en 2003. Grande école d'ingénieurs et d'architectes sous la tutelle du ministère de l'enseignement supérieur et de la recherche, ses formations d'ingénieurs sont accréditées par la commission des titres d’ingénieur, celle d'architecte est accréditée par la commission culturelle, scientifique et technique du ministère de la culture.
Institut national des Sciences appliquées de Strasbourg Alumni
Matthieu Binder
Engine Dyno Test Engineer chez Delphi Powertrain Systems
Automotive
Education
IFP School - Ecole National Supérieure du Pétrole et des Moteurs 2009 — 2010
Ingénieur, Moteur à combustion interne
2006 — 2009
Ingénieur, Génie Mécanique option Energétique Industrielle
IUT de Mulhouse 2004 — 2006
DUT, Génie Mécanique et Productique
Experience
Delphi Powertrain Systems January 2011 - Present
PSA Peugeot Citroën September 2009 - January 2011
Renault March 2009 - August 2009
CENAERO June 2008 - August 2008
Haemmerlin June 2007 - July 2007
TRW April 2006 - July 2006
Matthieu Lefebvre
Executive Director France at Aerodata International Surveys
Aviation & Aerospace
Education
Institut national des Sciences appliquées de Strasbourg 2002 — 2005
Master of Science (M.Sc.), Geodesy, Land Survey, GIS and Remote Sensing
Experience
Aerodata International Surveys March 2015 - Present
Aerodata International Surveys November 2013 - Present
AFIGEO June 2014 - Present
Aerodata International Surveys January 2011 - October 2013
I2G July 2006 - December 2010
ADULM February 2005 - June 2006
GE-INFRA July 2004 - August 2004
IRD July 2003 - August 2003
Skills
Cartography, Business Development, Remote Sensing, Project Management, Spatial Analysis, Geospatial, GIS, Surveying, Photogrammetry, LiDAR, Innovation, Geomatics
Maxime Etienne
Toolshop LeaderPlant CI Leader Plastic Omnium Auto Exterior
Plastics
Education
ntnu 2010 — 2011
Institut national des Sciences appliquées de Strasbourg 2006 — 2011
Ingénieur Mécanique Spécialité Plasturgie, Ingénierie des polymères / plastiques
Rascol
Baccalauréat, Sciences de l'ingenieur
Experience
Plastic Omnium January 2014 - Present
Plastic Omnium July 2013 - January 2014
Plastic Omnium July 2011 - July 2013
NTNU August 2010 - December 2010
Faurecia Interior Systems June 2010 - August 2010
Plastic Omnium June 2009 - July 2009
Skills
5S, Manufacture
Maxime Leblanc
Ingénieur Logiciel chez Devialet
Computer Software
Education
Institut national des Sciences appliquées de Strasbourg 2008 — 2013
Diplôme d'Ingénieur, Génie Electrique
Ecole de Musique d'Amboise
Experience
Devialet September 2013 - Present
Devialet February 2013 - July 2013
Syracuse University June 2012 - August 2012
Technicentre SNCF - Saint-Pierre-Des-Corps July 2011 - August 2011
Skills
Programming, Git, Electronics, C++ Language, Android SDK, CMake, Android NDK, Java, Mobile Applications, Cross-platform..., QML, Qt
Maxime Lombard
R&D Project Manager at Gerflor
Plastics
Education
Institut national des Sciences appliquées de Strasbourg 2004 — 2009
Master, Plastics Engineering
KTH Royal Institute of Technology 2008 — 2008
Experience
Gerflor March 2010 - Present
Plastic Omnium Auto Extérieur February 2009 - June 2009
Skills
Calendaring, Engineering, Formulation, Manufacturing, Plastics, PVC, Recycling, R&D, Process Improvement
Michael AMSELLEM
Director of Product Management, MultiChannel Services at Ingenico Payment Services
Information Technology and Services
Education
Institut national des Sciences appliquées de Strasbourg 1997 — 2000
MS, Software, Electronics, Electrical Engineering
Classes Préparatoires aux Grandes Ecoles / PSI* 1995 — 1997
Condorcet
Experience
Ingenico Payment Services June 2015 - Present
Ingenico Mobile Solutions April 2013 - May 2015
Ingenico Group May 2011 - April 2013
Ingenico Group September 2010 - May 2011
Ingenico Group October 2009 - September 2010
Ingenico Group September 2007 - October 2009
Neopost France April 2005 - September 2007
Chaveriat Robotique April 2004 - April 2005
Nortel Networks April 2002 - April 2004
Thales Communications October 2000 - April 2002
Michel ALBERT
Commissioning Engineer chez GDF SUEZ
Oil & Energy
Education
EC School Los Angeles 2014 — 2014
English Certificat, High intermediate B2
Institut national des Sciences appliquées de Strasbourg 2005 — 2008
Master's degree, Mécanique Production
Cormontaigne
Jean Renoir
Lycée Cormontaigne
Experience
GDF SUEZ December 2014 - Present
GDF SUEZ December 2009 - November 2014
Daimler - Mercedes July 2008 - November 2009
Sandvik January 2008 - June 2008
Skills
5S, Project Engineering, Compressor Stations, Oil/Gas, Machine Tools, Gas Turbines, Gas Pipelines, Benchmarking, Engineering, Methods Engineering, Energy, Painting, Natural Gas
Michel DENIS
Chef d'entreprise, AYMADE eurl
Management Consulting
Education
1974 — 1976
3 ème cycle de management, management
1965 — 1969
ingénieur ENSAIS, Mécanique
EPF Ecole d'Ingénieurs
Experience
AYMADE eurl January 2008 - Present
BLUM France September 2004 - January 2008
HOMMELWERKE September 2000 - July 2004
ETAMIC groupe SAGEM January 1985 - June 2000
Skills
Business Process..., French, Marketing Strategy, Budgets, management de transition, Coaching, New Business Development, management d'entreprise, Project Management, actions commerciales, Sales Management, English, Business Analysis, Business Strategy, Management Consulting, Allemand, Business Development, Management, conseil en management
Michel MARZIN
Project Manager chez CETIM
Mechanical or Industrial Engineering
Education
Institut national des Sciences appliquées de Strasbourg
MECHANICAL ENGINEER
ECPM Ecole européenne de chimie polymères et matériaux de Strasbourg
Plastics Engineering
UFR Sciences et Techniques Besancon
Maitrise ès Science (Master of science), Mechanical Engineering
Experience
Cetim - Centre technique des industries mécaniques November 2011 - Present
MATIS 2008 - 2011
THYSSENKRUPP SOFEDIT 1998 - 2008
Skills
SolidWorks, Automotive Engineering, Test Management, Conception de produit, ANSYS, Testing, Abaqus, Hypermesh, Signal Processing, Manufacture, Design de produits, Finite Element Analysis, Ingénierie, AMDEC, Fatigue Analysis, Gestion de projet, nCode, Mechanical Engineering, Méthode des éléments..., CAD
Michel Nagel
Responsable Agence de Grenoble chez SOTEB
Electrical/Electronic Manufacturing
Education
Institut national des Sciences appliquées de Strasbourg 2001 — 2004
Ingénieur Génie Electrique
Lycée Edouard Branly Lyon 2001 — 2004
Classes préparatoires
Michel Obrecht
Experienced Engineering Manager michel.obrecht@gmail.com
Pharmaceuticals
Education
Ecole nationale supérieure des Mines de Saint-Etienne 1986 — 1987
Master, Informatics
Institut national des Sciences appliquées de Strasbourg 1976 — 1981
Engineer, Energetics
Experience
Syngenta 2009 - 2010
Bayer January 2005 - June 2008
Roche October 1996 - December 2004
Rhône Poulenc 1989 - 1991
Skills
Technology Transfer, Project Management, Engineering, Gestion de projet, Change Management, Validation, BPF, GMP, Amélioration continue, Continuous Improvement, Pharmaceutical Industry, Secteur pharmaceutique, Quality Management, Leadership d'équipe..., Supply Chain, Management, Ingénierie, Contrôle des...
Michel SCHMITT
Sector leader Boring &Tests @ Secotools
Mechanical or Industrial Engineering
Education
Institut national des Sciences appliquées de Strasbourg 2004 — 2007
Ingénieur, Mécanique
LEGTI Haguenau 2001 — 2002
Licence ( Bac +3), Ingénirie de production
Experience
Seco Tools June 2010 - Present
Seco Tools June 2007 - June 2010
Seco Tools September 2004 - June 2007
Skills
Management, Vente, Leadership, Recherche, Formation, Microsoft Word, PowerPoint, Microsoft Excel
Mickaël Martins Afonso
Chef de projet chez Agence d'architecture Brochet Lajus Pueyo
Architecture & Planning
Education
Institut national des Sciences appliquées de Strasbourg 2013 — 2014
HMONP, Architecture
École Nationale Supérieure d'Architecture et de Paysage de Bordeaux 2008 — 2010
Master, Architecture
École Nationale Supérieure d'Architecture de Clermont-Ferrand 2007 — 2008
Licence, Architecture
Lycée René Descartes Cournon d'Auvergne 2005 — 2007
BTS, Design d'espace
Université Michel de Montaigne Bordeaux 3 2004 — 2005
DEUG, Arts Plastiques Mention Arts Appliqués
Escola Secundária Campos Melo, Covilhã 2001 — 2004
Ensino secundário, Artes geral
Experience
Agence d'architecture Brochet Lajus Pueyo September 2010 - Present
Skills
Design de produits, Communication visuelle, Rhinoceros 3D, Microsoft Office, Aménagement d'intérieur, Architecture d'intérieur, Adobe Illustrator, Rendu visuel, Interior Design, Design architectural, AutoCAD, Design d'espace, Adobe Photoshop, Architecture, Revit, Photographie
Morgan Aubert
Enginier at Renault
Automotive
Education
Institut national des Sciences appliquées de Strasbourg 1999 — 2003
Experience
Renault May 2010 - Present
Self-employed May 2010 - Present
Natacha Bou Ferraa
Ingénieur en Génie Climatique, Double formation Architecte/Ingénieur, en recherche active
Research
Education
Institut national des Sciences appliquées de Strasbourg 2010 — 2012
Diplôme d'Ingénieur en Génie climatique et Energétique, Génie Climatique et Energétique
Institut national des Sciences appliquées de Strasbourg 2009 — 2010
HMONP, Architecture
Institut national des Sciences appliquées de Strasbourg 2005 — 2009
Diplôme d'état d'Architecte de l'INSA de Strasbourg, Architecture
Ecole polytechnique fédérale de Lausanne, Suisse 2007 — 2008
Architecture
Lycée général et technologique de Baimbridge 2004 — 2005
Classe péparatoire aux grandes écoles - Mathématiques, Physique et Science de l'ingénieur, Admission au concours d'entrée en Architecture de l'INSA de Strasbourg
Maîtrise de Massabielle 2001 — 2004
Diplôme national du Baccalauréat, Serie S
Experience
EDF OPTIMAL SOLUTIONS May 2014 - March 2015
SNC LAVALIN June 2013 - August 2013
IE CONSEIL November 2012 - June 2013
ALTO Ingénierie February 2012 - July 2012
ALTO Ingénierie June 2011 - August 2011
AWAZU PONFILLY ARCHITECTES March 2010 - August 2010
GENARCHI ARCHITECTES June 2008 - July 2008
PILE & FACE June 2007 - July 2007
ICM June 2006 - July 2006
Skills
Énergie renouvelable, Génie climatique et..., SketchUp, Microsoft Office, Architecture, Recherche, Urbanisme, InDesign, Photoshop, Adobe Photoshop, Chauffage Ventilation..., Construction, Réseau de chaleur basse..., AutoCAD
Natacha Bou Ferraa
Architecte Diplômé d'Etat
Architecture & Planning
Education
Institut national des Sciences appliquées de Strasbourg 2005 — 2009
5éme année, Architecture
2007 — 2008
M1, Architecture
Lycée général et technologique de Baimbridge 2004 — 2005
Bac+1, CPGE - MPSI
Maîtrise de Massabielle
Experience
Agence Générale d'Architecture June 2008 - July 2008
Pile et Face June 2007 - July 2007
Ingenierie Construction Moderne June 2006 - July 2006
Nick McGough
Associate at reForm Architects
Architecture & Planning
Education
Oxford Brookes University 2004 — 2006
Post Grad (RIBA Part II), Architecture
University of Bath 2002 — 2003
BSc, Architecture
Institut national des Sciences appliquées de Strasbourg 2001 — 2002
Erasmus, Architecture
University of Bath 1999 — 2001
BSc, Architecture
London South Bank University 2008 — 2009
Post Grad (RIBA Part III), Professional Practice
Experience
reForm Architects June 2015 - Present
Oxford Brookes University September 2014 - Present
University of Bath September 2011 - Present
Grimshaw July 2009 - Present
University of Greenwich December 2014 - April 2015
Grimshaw August 2006 - June 2009
Wilkinson Eyre Architects September 2003 - August 2004
Terry Pawson Architects May 2001 - August 2001
Skills
Architectures, BIM, University Teaching, Architectural Design, Architecture, Airports, Tracked Transit Systems..., Comprehensive Planning, Construction, Mixed-use, Light Rail, Wayfinding, Residential Design, Architectural Drawings, Parametric Design, Sustainable Design
Nicolas BRIOT
Etudiant at INSA de Strasbourg
Mechanical or Industrial Engineering
Education
Institut national des Sciences appliquées de Strasbourg 2011 — 2016
Master of Engineering (M.Eng.), Ingénierie électrique et électronique, Voir en PJ
Kungliga tekniska högskolan 2015 — 2015
Ingénierie électrique et électronique
Experience
WorldSkills France - COFOM January 2015 - Present
INSA de Strasbourg September 2011 - Present
Festo France June 2014 - July 2014
Skills
Électronique, Matlab, Français, Génie électrique, Gestion de projet, Programmation, Électronique de..., Anglais
Nicolas Beltran
Freelance consultant Quality and Project management
Aviation & Aerospace
Education
2001 — 2004
Ingénieur, Génie Mécanique
1998 — 2000
DUT GMP, Génie Mécanique et Productique (Mechanical Engineering
Experience
Gambro May 2015 - Present
Duqueine Composites Rhone-Alpes July 2013 - May 2015
ALSTOM GRID May 2011 - July 2013
Philips Lighting March 2009 - May 2011
Philips Lighting May 2008 - November 2010
Bosch Rexroth April 2007 - May 2008
Bosch Rexroth November 2004 - April 2007
Skills
people management, FMEA, Supplier quality, Project management, NADCAP, Technique de résolution..., Manufacture, EN/AS9100, Maîtrise statistique..., Customer quality, Manufacturing quality, Change Management, ISO 9001, Six Sigma
Nicolas Bequet
Plant Manager bei DSM
Chemicals
Education
Institut national des Sciences appliquées de Strasbourg 2002 — 2006
2006, Mechanical Engineering - Production
Lycée Technique Gustave Eiffel Bordeaux 2000 — 2002
2002, Designer of Industrial Products
Experience
DSM January 2014 - Present
DSM Nutritional Products February 2007 - December 2013
DSM Nutritional Products September 2006 - December 2013
Robert Bosch August 2002 - June 2006
Skills
Project Management, Process Engineering, Six Sigma, Chemical Engineering, Chemistry, Engineering, FMEA, Automotive, Business Planning, Supply Chain Management, Operational Excellence, Recruiting, Strategy, Manufacturing, Continuous Improvement, Fertigung, Technology Transfer, Reliability Engineering, HAZOP, Process Optimization, Polymers, Change Management, Management, Lean Manufacturing
Nicolas CHARPENTIER
Contract Manager chez Siemens
Oil & Energy
Education
EM Strasbourg Business School 2001 — 2002
MAE (Master Administration Entreprise)
Institut national des Sciences appliquées de Strasbourg 1998 — 2001
Ingénieur Généraliste
Experience
Siemens Energy October 2014 - Present
Siemens Energy February 2007 - September 2014
Siemens Energy September 2004 - February 2007
Thales May 2002 - September 2004
Skills
Project Planning, Contract Management, Tender Management, Risk Management, Bid Strategy, Project Management, Energy
Nicolas CHERRIER
En poste (KD group)
Electrical/Electronic Manufacturing
Education
Institut national des Sciences appliquées de Strasbourg 2010 — 2012
Master's degree, Quality, Mention "Bien"
AFPI 2006 — 2007
Licence professionelle, Qualité
Lycée technique Vaucansson 2000 — 2005
Bachelor's degree
Experience
KD Group of companies September 2013 - Present
Schneider Electric September 2010 - April 2013
ST-Ericsson February 2009 - April 2010
ALSTOM April 2008 - January 2009
Skills
JAPANESE JRL & JATE, LVD DIRECTIVE..., Ishikawa, EN71, Microsoft Office, Product Quality, CMMI, AMDEC, Quality System, Six sigma (green belt), BATTERY DIRECTIVE..., BS OHSAS 18001, R&TTE DIRECTIVE..., 5S, G8D, Microsoft Access, ISO 14001, IEC60825-1, Pareto Charts, TOYS DIRECTIVE..., EN62115, Pareto Analysis, EMC DIRECTIVE..., REACH 1907-2006, Microsoft Visio, ISO8124, ISO 9001
Nicolas COLETTI
Business Developer chez Gravotech Group
Management Consulting
Education
2009 — 2010
Specialised Master of Technology & Innovation Management
2006 — 2009
Engineer, Mechatronics
Experience
Gravotech Group September 2014 - Present
GROUPE IT LINK - IT Link System + IPSIS August 2013 - August 2014
GROUPE IT LINK - IT Link System + IPSIS January 2011 - August 2013
MBDA (EADS Group) March 2010 - December 2010
Start-up (name confidential) November 2009 - March 2010
Hager February 2009 - August 2009
INSA Strasbourg September 2007 - January 2009
Skills
Marketing, Business Innovation, Gestion d'équipe, Project Management, New Business Development, Business Development, Conception de produit, Engineering, Mechatronics, Gestion de projet
Nicolas Georges
Ingénieur Structure chez CTE Strasbourg
Civil Engineering
Education
Institut national des Sciences appliquées de Strasbourg 2006 — 2011
Diplôme d'ingénieur, Génie civil
Experience
CTE Strasbourg July 2011 - Present
Nicolas Gilabert
Étudiant(e) (Institut national des Sciences appliquées de Strasbourg)
Education
Institut national des Sciences appliquées de Strasbourg 2014 — 2017
Ingénieur, Génie électrique
Lycée Gustave Eiffel Dijon 2013 — 2014
Classe préparatoire ATS
Lycée Gustave Eiffel Dijon 2011 — 2013
BTS Electrotechnique
Nicolas Gruselle
Senior Civil Engineer Water and Wastewater
Civil Engineering
Education
Institut national des Sciences appliquées de Strasbourg 1999 — 2002
Master, Civil Engineering
Experience
Atkins January 2008 - Present
Mott Macdonald September 2006 - December 2007
Mouchel Parkman February 2006 - September 2006
Setude Ingenieur Conseil February 2003 - September 2005
Skills
Highways, Water Engineering, Pump Stations, Wastewater, Civil Engineering, Road, Wastewater Treatment, Drainage, Hydrology, Sewer, Water Resources, Feasibility Studies, Stormwater Management, Water, AutoCAD, Water Supply
Nicolas HEINRICH
Responsable d'Affaires chez Cegelec Lorraine Alsace
Business Supplies and Equipment
Education
Institut national des Sciences appliquées de Strasbourg 2007 — 2011
Diplôme d'ingénieur, Génie électrique
Nicolas Hartmann
Chef de projet junior chez JetSolutions SA
Machinery
Education
EM Strasbourg Business School 2014 — 2015
Master Administration des Entreprises, Administration des Entreprises
Institut national des Sciences appliquées de Strasbourg 2011 — 2014
Diplôme d'ingénieur, Mécatronique
Experience
JetSolutions SA July 2015 - Present
Nicolas Hennequin
Project Leader Verification chez Volvo Powertrain
Research
Education
2001 — 2005
Ingénieur, Génie mécanique
2004 — 2004
Experience
Volvo Powertrain July 2012 - Present
Volvo Powertrain January 2011 - June 2012
ALTEN March 2010 - December 2010
Continental Automotive Systems February 2007 - March 2010
EMC "Essais Moteur à Combustion" November 2005 - February 2007
Nicolas Lecointe
Available
Mechanical or Industrial Engineering
Education
Institut national des Sciences appliquées de Strasbourg 2005 — 2008
MASTER S DEGREE, Mechanical & Energy
Université Paris Sud (Paris XI) 2002 — 2004
BEng equivalent in Physics, Physics
Experience
FLEXELEC SA September 2013 - December 2014
FLEXELEC UK Ltd September 2010 - August 2013
FLEXELEC UK LTD October 2009 - August 2010
RUMP EQUIPEMENTS February 2008 - June 2008
PHARMASTER September 2007 - January 2008
INERIS April 2004 - June 2004
Skills
Strategy, Electricians, Project Engineering, Electrical, Energy Efficiency, Negotiation, Energy, Engineering, Product Development, Mechanical Engineering, Renewable Energy, Manufacturing
Nicolas Maffre
Responsable BE Mecanique
Research
Education
Institut national des Sciences appliquées de Strasbourg 2008 — 2010
Experience
PA.COTTE May 2015 - Present
Groupe Atlantic August 2011 - May 2015
Nicolas Mertz
Chargé planning Exellence opérationnelle et Lean management
Construction
Education
2007 — 2010
2005 — 2007
DUT, Génie Civil
Experience
spie batignolles November 2013 - Present
spie batignolles January 2013 - October 2013
spie batignolles May 2012 - December 2012
spie batignolles January 2012 - May 2012
spie batignolles July 2011 - December 2011
spie batignolles October 2010 - July 2011
Nicolas NEVEU
Commercial Pilot with ME/IR/MCC/FI/Frozen ATPL
Airlines/Aviation
Education
Wycombe Air Centre (Wycombe Air Park, England) 2011 — 2011
Flight Intructor rating (FI), Aviation
Mayfair School of English (London, England) 2010 — 2011
English course, Business and General English
Top Fly (Sabadell, Spain) 2006 — 2009
Pilot licence : JAR-CPL(A) wiht IR/ME/MCC, Flight Training Organisation (FTO), Aviation
Institut national des Sciences appliquées de Strasbourg 2003 — 2006
Engineer, Electrical Engineering
Lycee Dumont d'Urville (Toulon, France) 2001 — 2003
Physics, Mathematics
Lycee Dumont d'Urville (Toulon, France) 1998 — 2001
Baccalaureat
Experience
Aéroports de la Côte d’Azur April 2015 - Present
VINCI Airports February 2014 - March 2015
Aéroports de la Côte d’Azur May 2013 - November 2013
Aéroports de la Côte d'Azur April 2012 - November 2012
Vueling Airlines December 2009 - June 2010
Politecnika Poznanska (Poznan University of Technology) January 2006 - June 2006
AREP June 2005 - July 2005
Astier Electronique June 2004 - July 2004
Skills
Spanish, Commercial Pilot, English, French, Aviation, Aircraft
Nicolas Peter
Ingénieur Topographe chez MAP Géomatique SA
Construction
Education
2008 — 2011
Ingénieur, Topographie
Lycée Henri Loritz 2006 — 2008
BTS, Géomètre Topographe
Experience
MAP Géomatique October 2011 - Present
Electricité de Strasbourg January 2011 - October 2011
ETAFAT June 2010 - August 2010
Cabinet Clerget June 2009 - July 2009
Cabinet Clerget July 2007 - August 2007
Cabinet Clerget May 2007 - July 2007
Skills
Project Planning, Geomonitor (Solexperts), contrôle d'exécution, French, Engineering, AutoCAD, Covadis, Mensuration de chantier, Autopiste, Microsoft Office, Windows, LaTeX, LTOP
Nicolas Pruvost
Étudiant(e) (Institut national des Sciences appliquées de Strasbourg)
Renewables & Environment
Education
Institut national des Sciences appliquées de Strasbourg 2013 — 2016
Prepa ATS Génie Civil 2012 — 2013
prepa ATS Génie Civil, Génie Civil
Université de Picardie Jules Verne (Amiens) 2011 — 2012
DUT, Génie civil
Experience
Charles Darwin University June 2015 - Present
EUROVIA July 2013 - August 2013
COLAS June 2011 - August 2011
Skills
AutoCAD, Énergie renouvelable, Gestion de projet
Nicolas SOMMER
PHD Student chez EPFL
Think Tanks
Education
Ecole polytechnique fédérale de Lausanne 2010 — 2012
Master M2, Microtechnique, spécialité robotique et systèmes autonomes
2007 — 2012
Diplôme d'ingénieur, Mécatronique
Experience
EPFL December 2012 - Present
EPFL September 2011 - Present
EPFL March 2012 - November 2012
INSA Strasbourg June 2010 - July 2010
Siemens June 2009 - July 2009
Otto Nussbaum June 2007 - July 2007
Skills
Pattern Recognition, Machine Learning, Simulink, Mobile Robotics, Human-robot Interaction, Robotics, Algorithms, Mechatronics, LaTeX, Artificial Intelligence, C++, Matlab, Labview
Nicolas Videau
Electrical/Electronic Manufacturing
Education
IAE Toulouse, Ecole de Management de l'Université Toulouse 1 Capitole 2014 — 2015
Master, Management de l'Innovation
Institut national polytechnique de Toulouse 2010 — 2014
Doctor of Philosophy (PhD), Génie électrique
IHEDN Institut des Hautes Études de Défense Nationale
74e séminaire jeunes
Ecole polytechnique fédérale de Lausanne 2007 — 2009
Master of Science (MSc), Génie électrique et électronique
Institut national des Sciences appliquées de Strasbourg 2005 — 2009
Ingénieur, Génie électrique
Venturelab CTI Entrepreneurship - Confédération Suisse
Module « Venture Challenge »
Skills
Energy, PCB Design, Innovation Management, Power Electronics, Engineering, Altium Designer, Renewable Energy, Research, Simulations, Hydrogen Battery, Electrical Engineering, Electronics, Semiconductors, Characterization, Matlab
Norbert PHILIPPE
Chef de Projet chez Bombardier Transportation
Transportation/Trucking/Railroad
Education
Norbert Philippe
Senior Project Manager at Bombardier Transportation
Transportation/Trucking/Railroad
Education
Institut national des Sciences appliquées de Strasbourg 1993 — 1997
Olivier Allio
Chef d'entreprise, RENERGETIC
Civil Engineering
Education
1985 — 1988
Ingénieur, Ingénierie
INSA 1985 — 1988
Ingénieur Généraliste
Experience
RENERGETIC January 2010 - Present
KONE October 1997 - March 2009
Leroy Somer January 1989 - October 1996
Skills
Negotiation, Bilan Carbone, English, New Business Development, Product Development, Stratégie commerciale, Sales Manager, French, Gestion de projet, Thermique, Rénovation, Sales Management, Change Management, Business Development, Project Planning, Team Management, Contract Negotiation, Business Strategy, International Sales, MS Project, Management, Management Consulting, Microsoft Office, Project Management, Négociations
Olivier KERVELLA
Contract Manager, EDF
Oil & Energy
Education
Institut national des Sciences appliquées de Strasbourg 2000 — 2003
Civil Engineer - Master's Degree, Civil Engineering
Université Laval 2002 — 2003
Civil Engineering
Lycée Kérichen / Vauban (Brest) 1998 — 2000
Classes Préparatoires aux Grandes Ecoles, PCSI et PSI
Experience
EDF August 2014 - Present
Urbaser Environnement January 2012 - July 2014
Urbaser Environnement January 2010 - January 2012
SOCOTEC March 2004 - January 2010
Skills
Ingénierie, Gestion des contrats, Claims, Construction, Gestion de projet, Génie civil
Olivier Klein
Expert Ingénierie
Electrical/Electronic Manufacturing
Education
Cardiff University - School of Engineering 2000 — 2001
Master of Science (MSc), Electronics Engineering
Institut national des Sciences appliquées de Strasbourg 1996 — 2001
Experience
ERDF November 2012 - Present
ErDF - GrDF March 2011 - November 2012
ErDF - GrDF August 2007 - March 2011
ErDF - GrDF September 2004 - August 2007
Gaz de France February 2002 - September 2004
Skills
Energy, Power Generation, Project Engineering, Energy Management, Power Plants, Engineering, Smart Grid, Renewable Energy
Olivier Pinto
Chef de projet conception/indus/amélioration
Mechanical or Industrial Engineering
Education
Institut national des Sciences appliquées de Strasbourg 1992 — 1995
Diplôme d'ingénieur mécanicien, Plasturgie
EICAR
Certificat d'aptitude professionnel, Dramaturgie et scénarisation
Experience
Labinal power September 2013 - February 2015
Labinal Power Systems 2013 - 2015
ALBEA October 2007 - April 2013
sagem 2000 - 2005
Husky Injection Molding Systems 1998 - 2000
Skills
Gestion de projet, Six Sigma, Amélioration continue, Lean Manufacturing, Emballage, Product Development, Ingénierie, AMDEC, Matière plastique, Manufacture
Olivier Raveneau
Supply Chain Projects Manager at Essilor
Information Technology and Services
Education
APICS 2006 — 2007
CPIM, Production and Inventory Management
Institut national des Sciences appliquées de Strasbourg 1990 — 1993
Engineer, Electrical engineering and Electronic
Institut de Recherche Polytechnique (IRP) de Mulhouse
DEA, Automatic and Industrial data processing
Experience
Essilor Project ManagerLogica1995 - 1996
Skills
Supply Chain, Procurement, Supply Chain..., Operations Management, Business Analysis, Cross-functional Team..., Manufacturing, Lean Manufacturing, ERP, Process Improvement, Change Management, Business Process..., Logistics, Supply Chain Management, Continuous Improvement
Olivier SCHMIDT
Directeur Recherche et Développement chez Plastic Omnium
Renewables & Environment
Education
Institut national des Sciences appliquées de Strasbourg 1989 — 1992
Ingénieur, Ingénierie des polymères / plastiques, 2ème de la promotion
Experience
Plastic Omnium December 2014 - Present
Plastic Omnium March 2013 - November 2014
Oscar De La Cruz
Robotics/Mechatronics Engineer Fluent English, French and Spanish
Industrial Automation
Education
Université Pierre et Marie Curie (Paris VI) 2013 — 2014
Master's degree, Advanced Systems and Robotics
Polytech Paris-UPMC 2012 — 2014
Master's Degree, Robotics
Universidad Autónoma de Ciudad Juárez 2007 — 2012
Bachelor of Engineering (B.E.), Mechatronics
Institut national des Sciences appliquées de Strasbourg 2010 — 2011
Mechatronics
Experience
CEA - French Alternative Energies and Atomic Energy Commission April 2014 - September 2014
Karlsruhe Institute of Technology (KIT) / University of Karlsruhe (TH) July 2013 - August 2013
Stoneridge Electronics December 2011 - July 2012
Universidad Autónoma de Ciudad Juárez 2006 - 2011
Skills
Proteus, AutoCAD, Python, OROCOS (Open Robot..., ROS (Robot Operating..., Open Office, CMake, Solidworks, Matlab, C++ Language, Git, LaTeX, Multisim, ProEngineer, Programmable Logic..., Microsoft Office, Catia, xde, Java
PHAM Anh Duc
Étudiant à Institut national des Sciences appliquées de Strasbourg
Civil Engineering
Education
2006 — 2009
Pascal Parodi
CUSTOMER SERVICE MANAGER
Mechanical or Industrial Engineering
Education
Institut national des Sciences appliquées de Strasbourg 1991 — 1994
Mechanical Engineer
Experience
Palfinger Fertigungsprojekt IngenieurRobert BoschFebruary 1999 - February 2001
Mannesmann Demag January 1996 - February 1999
Pascal RENAUT
CP chez Electricité de Strasbourg
Oil & Energy
Education
2002 — 2003
Patrick Maillard
Ingénieur QHSE chez SETOM
Government Relations
Education
Institut national des Sciences appliquées de Strasbourg 2006 — 2007
Master 2, Environnement et aménagement du territoire
Université de Technologie de Compiègne 1990 — 1993
Doctorat, Génie enzymatique, Bioconversion et Microbiologie
Université de Paris VI 1986 — 1987
DEA, océanographie, option algologie
Experience
SETOM May 2011 - Present
DCNS September 2010 - February 2011
FERRY-CAPITAIN August 2008 - January 2010
SAFRAN Group, SLCA May 2007 - April 2008
Oceaniu May 2003 - May 2006
Mersitem Therapeutic November 1999 - February 2003
Thallia Pharmaceuticals May 1988 - October 1999
Patrick Semavoine
Owner at Led Reflex
Industrial Automation
Education
ENSAIS 1992 — 1995
Engineer's degree, Mechatronics, Robotics, and Automation Engineering
Institut national des Sciences appliquées de Strasbourg
Experience
Sematronik OwnerLed ReflexJanuary 2009 - Present
Direct Video 1997 - 2007
Skills
Negotiation, Marketing Communications, Marketing, Business Strategy, Sales Management, Business Development, Automation, New Business Development, Product Development, Manufacturing, Project Management, Product Management, Management
Patrick VALTON
Corporate BIM Manager chez Legrand
Electrical/Electronic Manufacturing
Education
Institut national des Sciences appliquées de Strasbourg 1976 — 1981
Ingénieur ENSAIS, Génie Climatique et Energétique
Institut Français de Gestion 1994 — 1996
Master Marketing Stratégique - INM
KAHLER COMMUNICATION FRANCE
Séminaire Process Communication Niveau 1
KAHLER COMMUNICATION FRANCE
Séminaire Process Communication Niveau 2
Experience
Legrand September 2014 - Present
Legrand April 2010 - Present
Legrand 2008 - 2010
Legrand 2004 - 2008
BACO (Groupe LEGRAND) 2001 - 2004
De Dietrich Thermique 1998 - 2001
De Dietrich Thermique 1994 - 1998
De Dietrich Thermique 1993 - 1994
De Dietrich Thermique 1992 - 1993
De Dietrich Thermique 1988 - 1992
Paul BADER
Product Manager at Siradel
Information Technology and Services
Education
Institut national des Sciences appliquées de Strasbourg 1995 — 2000
G
Pauline ALBERT
Civil Engineering
Education
Institut national des Sciences appliquées de Strasbourg 2010 — 2013
Master's degree, Génie civil
Experience
Perreten & Milleret SA (PMSA) August 2013 - Present
T-ingénierie January 2013 - June 2013
Construction Perret June 2012 - July 2012
Construction Perret June 2011 - July 2011
Skills
PowerPoint, English, Microsoft Excel, Outlook, Microsoft Word, Photoshop, Microsoft Office, Windows
Pauline BOULANGER
Ingénieure thermicienne chez Groupe ACCEO
Renewables & Environment
Education
Institut national des Sciences appliquées de Strasbourg 2009 — 2012
Ingénieur, CVC
Lycée Albert Schweitzer 2006 — 2009
Classe préparatoire Maths-Physique
Experience
Groupe ACCEO December 2014 - Present
GEST'ENERGIE October 2012 - May 2014
CNRS February 2012 - June 2012
Spie Est December 2011 - December 2011
Philae June 2011 - August 2011
ThermoSan June 2010 - July 2010
Skills
Chauffage, Thermique, Pléiades-Comfie, Plancal, Climatisation, PowerPoint, Traitement d'air, Microsoft Word, Microsoft Excel, Hydraulique, Régulation, TRNSYS, AutoCAD
Pauline DESSEGE DAVAL
Ingénieur d'Etudes
Oil & Energy
Education
Institut national des Sciences appliquées de Strasbourg 2005 — 2010
Ingénieur, Génie Electrique Energie
Experience
Assystem July 2014 - Present
TECSOL 2010 - 2014
Skills
Ingénierie, Analyse des besoins, Energy, Développement de marchés, Solar Energy, Énergie, Electricity, Gestion de projet, Engineering, AutoCAD, Project Management
Perez Jean sebastien
Sales manager excitation system at ABB Switzerland Ltd
Mechanical or Industrial Engineering
Education
Institut national des Sciences appliquées de Strasbourg
Genie electrique, Ingénierie électrique et électronique
Experience
ABB March 2011 - Present
Alstom Power August 2007 - March 2011
Alstom Power March 2006 - August 2007
Skills
Six Sigma, Engineering Management, Commissioning, Power Generation, Power Plants, Project Engineering, Variable Frequency..., Project Management, Marketing Strategy, Energy, Oil/Gas, Generators, Electricians, English, Engineering, Gas Turbines, Sales, Power Electronics, Automation, Manufacturing, EPC, Electrical Engineering
Philippe Boutemy
Research Group Manager
Environmental Services
Education
Institut national des Sciences appliquées de Strasbourg 1988 — 1993
Engineer, Mechanics
Université Louis Pasteur (Strasbourg I) 1992 — 1993
DEA, Mechanics
Experience
Veolia Environnement 2010 - Present
Merck Millipore March 2001 - July 2009
France Medica November 1994 - February 2001
Skills
Management, Product Development, Systems Engineering, Engineering, MS Project, Business Development, International Project..., R&D, Validation, Strategy, C, Business Analysis, Process Engineering, Project Management, Change Management, Manufacturing
Philippe FLEJOU
Training Manager chez Huron Graffenstaden
Machinery
Education
Institut national des Sciences appliquées de Strasbourg 1995 — 1996
DEA Mécanique et Ingénierie, Mécanique des matériaux solides et des structures
IPST Strasbourg 1992 — 1995
Ingénieur Maître en Génie des Systèmes Industriels, Mécanique
Experience
Huron Graffenstaden November 1997 - Present
Skills
CAD/CAM Software, Change Management, Employee Training, Onboarding, Technical Support, Technical Training, Performance Management, Coaching, Training, Recruiting, Personnel Management, Programming Languages, Formation, Talent Management, Talent Acquisition, Succession Planning, Employee Engagement, Team Building, Organizational..., Training Delivery, Mechanical Engineering, Employee Relations
Philippe Gantzer
Ingénieur Géomètre chez archimedGE
Civil Engineering
Education
2002 — 2007
Ingénieur, Topographie
Experience
archimed-GE June 2012 - Present
Legorgeu October 2007 - June 2012
Skills
GIS, Microsoft Office, PHP, HTML
Philippe Heitz
Global Head Engineering ChemOps chez Novartis Pharma
Pharmaceuticals
Education
1985 — 1988
Ecole Nationale Superieure des Arts et Industries 1985 — 1988
Ing, Electrical, Electronics & Informatic
Experience
Novartis Pharma 2011 - Present
Novartis Pharma 2009 - 2011
Novartis 2006 - 2009
Novartis 2002 - 2006
Novartis 2001 - 2002
Skills
GMP, Active Pharmaceutical..., Pharmaceutical Industry, Key Account Management, Project Management, Program Management, Process Automation, Commissioning, Quality Assurance, Operations Management, Organization, Change Management, Validation, GAMP, BPF, Total Productive..., Industrial Engineering, Biotechnology, Leadership
Philippe Humbrecht
Project Lead at McLaren
Automotive
Education
Institut des Techniques de l'Ingenieur de l'Industrie - Strasbourg 1996 — 1999
Engineer, Mechanical design and project management
Institut national des Sciences appliquées de Strasbourg 1996 — 1999
Master of Engineering (M.Eng.), Mechanical Engineering
Institut national des Sciences appliquées de Strasbourg
Master of Engineering (M.Eng.), Mechanical Engineering
Institut national des Sciences appliquées de Strasbourg
Master of Engineering (M.Eng.), Mechanical Engineering
Institut national des Sciences appliquées de Strasbourg
Master of Engineering (M.Eng.), Mechanical Engineering
Institut national des Sciences appliquées de Strasbourg
Master of Engineering (M.Eng.), Mechanical Engineering
Institut national des Sciences appliquées de Strasbourg
Master of Engineering (M.Eng.), Mechanical Engineering
Experience
McLaren Automotive Ltd September 2013 - Present
Lotus Cars February 2012 - August 2013
Meritor December 2008 - February 2012
Bobcat Company 2006 - 2008
HEULIEZ 2002 - 2006
Renault 2000 - 2002
Calsonic Kansei 1999 - 2000
Tenneco 1996 - 1999
Skills
Strategy, Team Leadership, Product Development, Value Chain Analysis, Program Management, Business Strategy, Management, Value Engineering, Process Improvement, Project Planning, Business Case, Manufacturing, Vehicles, Continuous Improvement, Value Innovation, Innovation, Automotive Engineering, Risk Management, Project Management, Delivering Results, Automotive
Philippe JUNG
Product Management Director at Emtec
Semiconductors
Education
Ecole de Management de Lyon 2003 — 2004
Specialised Master, Technology & Innovation management
Institut national des Sciences appliquées de Strasbourg 1999 — 2002
Master of Science, Master of Science in electrical engineering
Preparatory class for Grandes Écoles
Experience
Emtec July 2014 - Present
Oberthur Technologies September 2011 - July 2014
SAGEMCOM January 2007 - September 2011
Safran April 2004 - January 2007
Yole Développement March 2003 - September 2003
Sanef June 2001 - September 2001
Skills
Business Development, Management, Product Marketing, Wireless, Industrial Markets, Product Management, Project Management, International Sales, Manufacturing, ODM management, Team Management, Purchasing, Product Development, Industrial marketing, Strategic Sourcing, Telecommunications, OEM Management, Business Strategy, Strategy, Outsourcing, Business Planning, Mobile Devices
Philippe KOCHER
Étudiant à Institut national des Sciences appliquées de Strasbourg
Automotive
Education
2006 — 2011
Philippe Leroy
Directeur Insa entreprises chez INSA Strasbourg
Research
Education
ENSIACET 1993 — 1995
ingénieur, chimie
PARIS XII 1991 — 1993
mâitrise de chimie, chimie organique
PARIS XII 1990 — 1991
DEUG B, sciences de la vie
lycée Chaptal 1988 — 1990
Sup et Spé Bio
Institut national des Sciences appliquées de Strasbourg
Experience
INSA Strasbourg March 2006 - Present
Université Robert Schuman March 2001 - March 2006
Sucreries et Raffineries d'Erstein March 1998 - March 2001
SA Sucreries et Raffineries d'Erstein September 1996 - March 1998
APPLEXION September 1995 - August 1996
Philippe Moisan
R&D Director at Dassault Systemes
Computer Software
Education
Institut national des Sciences appliquées de Strasbourg 1994 — 1997
Engineer, Mecatronic
Experience
Dassault Systèmes January 2012 - Present
Dassault Systemes January 2009 - January 2012
Dassault Systemes January 2006 - January 2009
Dassault Systemes January 2002 - January 2006
Dassault Systemes June 1998 - January 2002
Skills
Change Management, Product Manager, Catia, VPM, Step, System Engineering, Software Development, Enterprise Software, Product Lifecycle..., Integration, Systems Engineering, PLM, PDM, MatrixOne, Data Exchange, DELMIA, Gestion cycle de vie..., Architectures, C++, Product Life Cycle..., Software Engineering, Management, Développement de..., 3D, Strategy, CAD, Virtual Product Modeling, Enovia, Software Project..., Software architecture
Philippe Wolff
Responsable pôle foncier ciment chez Ciments Calcia
Building Materials
Education
Institut national des Sciences appliquées de Strasbourg 2001 — 2004
Ingénieur, Géomètre topographe
Experience
Ciments Calcia March 2015 - Present
Ciments calcia February 2012 - February 2015
Ciments Calcia February 2006 - February 2015
Communauté d'Agglomeration de Colmar October 2004 - August 2006
Pierre ARNAUD
Ph.D Student à l'Ecole Centrale de Lyon
Research
Education
université de strasbourg 2012 — 2013
Master's degree, Matériaux - Ingénierie des surfaces, Mention : Bien
Institut national des Sciences appliquées de Strasbourg 2010 — 2013
Ingénieur, Génie mécanique - Spécialité Ingénierie Matériaux et Surfaces
IUT de Limoges 2008 — 2010
Diplôme Universitaire de Technologie, Génie Mécanique et Productique
Experience
Ecole Centrale de Lyon, Laboratoire de Tribologie et Dynamique des Systèmes, CNRS UMR 5513 June 2014 - Present
Laboratoire de Tribologie et Dynamique des Systèmes, CNRS UMR 5513 December 2013 - June 2014
Institut Charles Sadron, CNRS UPR 0022 February 2013 - July 2013
BKE-machines June 2012 - August 2012
A3D design March 2010 - June 2010
Skills
Materials science, SolidWorks, Tribology, Engineering, Matlab, CAD, Ingénierie, Science des matériaux, Mechanical Engineering, Génie mécanique, Numerical Simulation
Pierre Briand
Architecte
Architecture & Planning
Education
Institut national des Sciences appliquées de Strasbourg 2005 — 2010
Master 2, Architecture, architecte diplômé d'état, habilité à la maîtrise d'oeuvre en son nom propre
Lycée Chevrollier-classe préparatoire aux grandes écoles 2004 — 2005
PTSI, concours INSA de Strasbourg
Lycée David d'Angers 2001 — 2004
baccalauréat, scientifique, mention bien
Experience
Pierre Briand Architecte April 2014 - Present
Agence DLW Architectes March 2012 - September 2013
Agence Forma6 Architectes et Urbanistes August 2011 - March 2012
Agence François Minier Architecte March 2011 - August 2011
Agence Magnum Architectes et Urbanistes February 2011 - March 2011
Agence Mabire-Reich Architectes February 2010 - September 2010
Agence Architettura Design March 2008 - June 2008
Agence Rolland Architecte June 2007 - July 2007
Skills
Gestion de projet, Design durable, Architecture, Architectural Drawings, Design résidentiel, Sustainable Design, Construction, Design architectural, Mixed-use, Design Research, Architectural Design, Design urbain, Recherche en design, SketchUp, AutoCAD Architecture, Écoute et communication, Submittals, Residential Design, Urban Design, Project Management, Construction Drawings, AutoCAD, Comprehensive Planning, Architecture AutoCAD, BIM
Pierre Caro
Master in Architecture at INSA Strasbourg
Education
Institut national des Sciences appliquées de Strasbourg 2011 — 2015
Master of Architecture (M.Arch.), Architecture
Lycée Gabriel Touchard, Le Mans 2010 — 2011
Preparatory class for entrance to top French engineer schools, Engineering sciences / Mathematics / Physical sciences
Experience
Francis Guieysse, architecture office June 2013 - July 2013
Diringer & Scheidel June 2012 - July 2012
Skills
ArchiCAD, Vectorworks, AutoCAD, Microsoft Office, SketchUp, Artlantis, Rhinoceros, PowerCADD, Adobe Creative Suite
Pierre Mesnier
Consultant chez Altran
Automotive
Education
Institut national des Sciences appliquées de Strasbourg 2001 — 2006
Ingénieur, Mécatronique
Experience
Altran January 2011 - Present
Altran September 2009 - December 2010
ALTRAN EST January 2009 - September 2009
ALTRAN EST December 2006 - January 2009
Pierre Perdoux
Senior Vice President Industrial Strategy & Systems chez Airbus
Automotive
Education
Stanford University Graduate School of Business 2008 — 2008
executive program, general management
Institut national des Sciences appliquées de Strasbourg 1987 — 1990
ingénieur, mechanical engineering and plastic processing
Experience
Airbus July 2014 - Present
AEROLIA (EADS Group) January 2013 - Present
Faurecia Interior Systems January 2011 - January 2013
Faurecia January 2009 - January 2011
Plastic Omnium January 2006 - December 2008
Plastic Omnium 2004 - 2006
Plastic Omnium 1998 - 2004
Plastic Omnium 1995 - 1997
Plastic Omnium 1993 - 1995
Plastic Omnium 1992 - 1992
Skills
APQP, Six Sigma, Toyota Production System, Aéronautique, Manufacturing..., Lean Manufacturing, Continuous Improvement, Supplier Quality, Automotive, Manufacturing..., FMEA, Quality Management, Supply Chain Management, Manufacturing, Root Cause Analysis, 5S, Value Stream Mapping, Process Improvement, Kanban, TPM, Kaizen