Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques, France
As of today, the INP-ENSIACET a unique education centre in Europe for engineering brilliance, of which the courses (engineering in chemistry and materials, process, chemical and industrial engineering) cover the entire industrial chain for matter transformation, energy and related services, starting from molecular analysis all the way to the introduction of finished products and processes to the market.
The INP-ENSIACET is a 3-year state engineering school, according to the CTI agreement and under the tutelage of the Ministry for Education, further education and research.
The INP-ENSIACET is a 3-year state engineering school, according to the CTI agreement and under the tutelage of the Ministry for Education, further education and research.
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques Alumni
Adeline Lefranc
Project Engineer in Disposable department at GlaxoSmithKline Biologicals
Chemicals
Education
ENSIACET (National Polytechnic Institute of Chemical Engineering Technology), Toulouse, France 2007 — 2010
Engineer, Chemical Engineering/Process
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2007 — 2010
Master, Processes engineering and chemistry
Experience
GlaxoSmithKline Biologicals February 2011 - Present
Lonza October 2010 - January 2011
UCB Pharma March 2010 - August 2010
NTNU University, Trondheim, Norvège July 2009 - September 2009
Adrien RENARD
Étudiant(e) (Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques)
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2014 — 2017
Ingénierie des matériaux
Experience
FA7 JE 2014 - 2015
Alain Ernewein
président chez entreprise d'insertion
Civic & Social Organization
Education
1958 — 1961
ingénieur, chimie
Alexandra Argoud
Ingénieur de recherche chez Solvay
Plastics
Education
2008 — 2011
Doctorat, Matériaux
2007 — 2008
Master 2 Recherche, Matériaux
2005 — 2008
Ingénieur, Matériaux
2003 — 2005
DUT Mesures Physiques, Matériaux et Contrôles Physico-Chimiques
Experience
Solvay October 2011 - Present
Rhodia September 2008 - February 2012
Arkema March 2008 - August 2008
SCG Chemicals July 2007 - September 2007
Snecma August 2006 - August 2006
Cognis April 2005 - June 2005
Skills
Physico-chimie, R&D, Polymères, Biopolymers, Mise en oeuvre, Additives, Polymer Blends, Polymer Science, Analytical Chemistry, Matériaux, Rheology, Formulation, Plastic Extrusion, Materials Science, Microscopy, Polymers
Alexandra HOW-SONG
Étudiante En Ingénierie des Matériaux (ENSIACET) Viceprésidente de FA7 JuniorEtudes
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2013 — 2016
Alexandra Popa
Team Manager
Automotive
Education
Academie des Etudes Economiques 2005 — 2008
Bachelor of Commerce (B.Com.)
Université Polytechique 2002 — 2007
Bachelor of Applied Science (B.A.Sc.)
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2004 — 2005
College National Bilinque "George Cosbuc" 1998 — 2002
Baccalaureat
Experience
Renault January 2012 - Present
Renault November 2009 - Present
Renault August 2008 - Present
Boiron May 2008 - August 2008
Scotler November 2006 - March 2008
Laboratoire Boiron July 2006 - October 2006
Boiron July 2005 - September 2005
Skills
Team Leadership, Project Planning, Prototype Framework, Positive Employee..., Workforce Planning, Management, Mechanical Engineering, Prototype, English, Project Management, Continuous Improvement, Cross-functional Team..., Performance Management, Engineering, Budgets, Negotiation, Team Management, Product Development, Automotive
Alexandre Rochas
Ingénieur d'essais chez Safran Herakles
Research
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2010 — 2013
Diplôme d'ingénieur, Ingénierie des matériaux - Spécialité : Durabilité des Matériaux et des Structures
Université Paul Sabatier (Toulouse III) 2012 — 2013
Master 2, Science des Matériaux, Nanomatériaux, Multimatériaux
Lycée Lavoisier 2009 — 2010
Physique Chimie (PC)
Experience
Safran Herakles February 2015 - Present
DCNS March 2013 - May 2014
Fives July 2012 - September 2012
Fives July 2011 - August 2011
Skills
Finite Element Analysis, Machine Tools, Plastics, Modeling, Engineering, CAD, Materials, Design of Experiments, R&D, Composites, Ingénierie, Product Design, Unigraphics
Alexis Ferrand
Consultant SAP chez Sopra
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2011 — 2014
Génie Industriel - Maîtrise des Projets Complexes et des Systèmes d'Information
CPGE PSI* Lycée Deodat de Severac 2009 — 2011
Lycée Pierre Paul Riquet
Baccalauréat S option SI
Experience
Sopra September 2014 - Present
CSC March 2014 - September 2014
Laboratoire de Génie Chimique Toulouse / Chemical Engineering Research Center of Toulouse July 2013 - September 2013
Biotrade July 2012 - August 2012
Troc 3000 Saint Orens July 2009 - August 2009
Skills
BizAgi, VBA, OPX2, Arena Simulation..., Microsoft Excel, Access, MS Project, Solidworks, UML, ProSim, SAP, ILOG
Alexis Guillard
R&D Project manager
Chemicals
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2010 — 2013
Ingénieur, Chimie, Analyses physico-chimiques
Université Pierre et Marie Curie (Paris VI) 2008 — 2010
Licence 2, Chimie, Physique, Mathématique
Experience
SNF March 2014 - Present
Thalès Communications & Security March 2013 - August 2013
ÉCOLE POLYTECHNIQUE DE MONTRÉAL July 2012 - September 2012
Editions Philippe Rey July 2011 - August 2011
Skills
Analytical Method..., Analytical Chemistry, Microsoft Excel, Chemistry, Analysis, Polymers, Quality Control, Microsoft Office
Ana Maria Ramos
Operations Coordinator (Sales, Purchase, Quality, RH)
Business Supplies and Equipment
Education
2000 — 2002
Mestrado, Eng. Ambiente
1989 — 1990
DEA, Engenharia de Processos
1984 — 1988
Licenciatura, Engenharia Química
Colégio Santo António 1981 — 1983
Instituto Superior de Tecnologia Empresarial do Porto
DBA em Gestão e Marketing de Serviços
Experience
PARALAB August 2008 - Present
Paralab August 2008 - Present
IBM December 1992 - May 2000
Skills
Marketing, Sourcing, Project Management, Training, Microsoft Office, Portuguese, French, Organizational..., Management, Strategy, Strategic Planning, Coaching, R, Employee Relations, PowerPoint, Process Engineering, Spanish, Business Strategy, English, Business Planning, Human Resources, Sales Management, Performance Management, Sales
Anna Legrand
Consultant en Chimie Analytique chez CaduCeum
Chemicals
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2010 — 2013
Ingénieur, Département Chimie - Analyses Physico-Chimique
Technische Universiteit Eindhoven 2012 — 2012
Semestre d'études, Chemical Engineering
Lycée Blaise Pascal 2008 — 2010
Classe préparatoire Physique-Chimie
Experience
CaduCeum May 2015 - Present
Excelvision Fareva February 2014 - March 2015
Pierre Fabre March 2013 - August 2013
Laboratoire de Chimie Agro-Industrielle de Toulouse July 2012 - September 2012
Sanofi June 2011 - July 2011
Anne Laure Aubert
Chef projet recherche développement industrialisation at Michelin
Automotive
Education
DESS de Qualitologie université Claude Bernard Lyon 1 2002 — 2003
DESS, Management de la qualité
1997 — 2001
Ingenieur, Chimie
Experience
Michelin January 2010 - Present
Michelin July 2005 - January 2010
Michelin November 2003 - July 2005
Anne Sophie Grand
Analytical Services (QC and IPC) Quality Assurance at UCB Pharma
Pharmaceuticals
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2007 — 2011
Master Science des Matériaux et Nanomatériaux, Spécialisation en Chimie Analytique
Experience
UCB Pharma November 2011 - Present
UNITHER Pharmaceuticals March 2011 - September 2011
Lyonnaise des Eaux September 2009 - February 2010
Skills
Lotus Notes, R&D, PowerPoint, Microsoft Office, MS Project, Validation, Engineering, Quality Management, Chemistry, Supply Chain, Environmental..., Windows
Antoine Aubin
Agent temporaire à l'enseignement et la recherche chez INP Toulouse Institut National Polytechnique de Toulouse
Research
Education
2006 — 2009
Ingénieur en génie chimique, Procédés, Modélisation, Chimie
Experience
INP Toulouse - Institut National Polytechnique de Toulouse September 2014 - Present
Université Toulouse III - Paul Sabatier October 2013 - August 2014
Ineos ChlorVinyls May 2010 - September 2013
AREVA NP March 2009 - August 2009
Skills
Project Management, Materials Science, Matlab, French, Engineering, R&D, Process Engineering, Chemical Engineering, Microsoft Project, Continuous Improvement, Process Simulation, Chemistry, Manufacturing, Polymers, Product Development
Antoine Bellot
Animateur scientifique chez Planète Sciences
Market Research
Education
Université Paris - Val-de-Marne (Paris XII) 2011 — 2012
Veille, gestion documentaire, médiation des savoirs
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2006 — 2009
Diplôme d'ingénieur, Génie chimique
Experience
Planète Sciences July 2013 - Present
Tendances Institut March 2012 - December 2012
Skills
Logiciel de..., Suite bureautique..., Logiciel de veille :..., Suite bureautique..., Google Webmaster Tools, Notions the GIMP, Logiciel de veille :..., Google Analytics
Antoine FRADIN de la RENAUDIERE
Senior IT project manager Asset management
Financial Services
Education
Conservatoire National des Arts et Métiers 2006 — 2007
Master's degree, Capital markets and finance, Auditor
Institut national polytechnique de Toulouse 1998 — 1999
Engineer's degree, Industrial engineering and project management engineer
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 1995 — 1998
Engineer's degree, Chemistry
Experience
Allianz Global Investors Europe September 2008 - Present
ALTI une société de Tata Consultancy Services September 2005 - September 2008
Skills
Asset Management, Budget Monitoring, Project Planning, Cloud Computing, Nintex, Agile Project Management, Salesforce.com..., UAT Coordination, Project Management, Business Requirements, Java / XML / Web..., Extreme Programming, Change Management, Management, SharePoint, CRM, Business referentials, SAP
Antoine GILBERT
Ingénieur commercial / Chef de projet chez Veolia Environnement
Environmental Services
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2000 — 2003
Diplôme d'ingénieurs Bac+5, Génie industriel
Lycée Montaigne
Experience
Veolia March 2003 - Present
Veolia March 2013 - December 2014
Veolia May 2012 - February 2013
Veolia February 2010 - April 2012
Veolia Environnement April 2007 - January 2010
Veolia Environnement March 2005 - March 2007
Skills
Traitement des eaux, Project Planning, Énergie, Management, Environmental Compliance, Systèmes de gestion de..., Contract Management, Financial Analysis, Commercials, Project Management, Gestion de projet, Environmental Awareness, Approvisionnement, Ingénierie, Stratégie commerciale, Water, Sustainable Development, Énergie renouvelable, Operations Management, Gestion d'équipe, Négociation de contrat, Sustainability
Antoine Roche
Trainee at DESY
Logistics and Supply Chain
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2013 — 2016
Chemical Process Technology, Industrial systems engineering
Lycée champollion 2011 — 2013
Mathematic, physic, Industrial science
Lycée Pierre Termier 2008 — 2011
Bachelor's degree in sciences
Experience
DESY May 2015 - Present
ELIS July 2014 - August 2014
School association October 2013 - May 2014
Skills
Chemical Engineering, VBA, Process Optimization, Microsoft Office, Process Simulation
Aristide ZONGO
Ingénieur aéronautique Calcul et Conception
Aviation & Aerospace
Education
2007 — 2010
Ingénieur Matériaux, Matériaux/Chimie
Experience
Zodiac Aerospace January 2014 - Present
AIRCAD June 2011 - November 2013
ISAE April 2010 - September 2010
LATECOERE June 2009 - September 2009
ASECNA (Agence pour la Sécurité de Navigation Aérienne en Afrique et Madagascar) July 2008 - August 2008
Skills
Chemical Engineering, LaTeX, Microsoft Office, Simulations, Materials Science, Calcul éléments finis, Aerospace, Nastran, Matlab, Composites, Structural Analysis, Aircraft, Stress Analysis, Modélisation, Fortran, Engineering, Catia, R&D
Arnaud Paris
Consultant technique SAP Web Dynpro
Information Technology and Services
Education
ENSEEIHT 2009 — 2010
Mastère Spécialisé en Informatique, Informatique
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2006 — 2009
Diplôme d'ingénieur, Sciences des matériaux
Université d'Auvergne (Clermont-Ferrand I) 2004 — 2006
DUT, Science des matériaux
Experience
Sopra Steria October 2010 - Present
Cap Gemini June 2010 - September 2010
Barbara Meunier
Global customer manager at Multibase, a Dow Corning Company
Plastics
Education
McGill University 2003 — 2004
Engineer’s Degree, Materials Engineering
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2001 — 2004
Engineer’s Degree, Materials and Chemicals Engineering
Experience
Multibase, a Dow Corning company January 2015 - Present
Multibase, a Dow Corning company January 2014 - December 2014
Multibase, a Dow Corning company June 2011 - December 2013
Daydream Sales Force January 2010 - May 2011
Daydream Sales Force July 2006 - July 2010
Daydream January 2006 - June 2006
Magnus Chemical Limited September 2004 - August 2005
Skills
Thermoplastics, Marketing, Key Account Development, Market Development, Polymers, International Sales, Business Development, Additives, Cross-functional Team..., Materials, Elastomers
Bassam NOHRA, Ph.D.
Chemist Polymer development at AQDOT Limited
Chemicals
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2009 — 2012
Docteur, Polymer and organic Chemistry, validé
Université de Strasbourg 2007 — 2009
Master's degree, Chimie informatique, Validé
ECPM Ecole européenne de chimie polymères et matériaux de Strasbourg 2006 — 2008
Master's degree, Materials Chemistry
Université Libanaise 2002 — 2006
Bachelor's degree and Master's degree, Chemistry
Experience
AQDOT Limited August 2015 - Present
Scion January 2014 - June 2015
L'Oréal January 2013 - December 2013
ENSIACET- Laboratoire de Chimie agro-industrielle (LCA) July 2012 - December 2012
Sofiprotéol - CONDAT - INPT - INRA - LCA January 2009 - May 2012
Institut Charles Sadron (Strasbourg) February 2008 - September 2008
Laboratoire d'ingénierie des polymères à haute technologies (LIPHT) April 2007 - September 2007
Skills
NMR 1D and 2D, Materials, Materials Science, Physico-chemical..., phpMyAdmin, Differential Scanning..., Computational Chemistry, FTIR, Polyhydroxyurethane, Polyurethane, Formulation, Preparative HPLC, Coatings, Spectroscopic Techniques, Polymer Materials, Polycarbonate, Polymer Chemistry, Lubricants, Chemistry, Analytical and..., Lipid Chemistry, CSS, NMR, Coupling Techniques, Characterization, Polymer Science, HTML, Organic Synthesis, Renewable Resources, Organic Chemistry, Biomaterials
Benjamin ANDRE
Hydroprocessing Technical Manager at UOP
Oil & Energy
Education
IFP School 2006 — 2008
Master of Science (MSc), Petroleum Economics and Management
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2004 — 2006
Master of Science (MSc), Industrial Engineering
Lycée Montaigne, Bordeaux, France 2002 — 2004
Preparatory course
Lycée Magendie, Bordeaux, France
Baccalauréat in Sciences (Physics, Chemistry, Biology, Mathematics)
Experience
UOP January 2014 - Present
Axens June 2013 - December 2013
Axens October 2011 - June 2013
Axens August 2008 - October 2011
ExxonMobil September 2006 - July 2008
Skills
Multi-tasked, Feasibility Studies, Conceptual Studies, Chemical Engineering, Analytical Skills, Margin Computation, Linear Models, Leadership, Business Analysis, Reporting, Communication, Process Simulation, R&D, Refinery Planning, Consulting, Optimization Models, Teamwork, Process Design, Organisation, Auditing, Problem Solving, Presentations
Benjamin Bonneau
Responsable Formation Site chez SEPPIC (entité Air Liquide)
Human Resources
Education
IAE Toulouse 2013 — 2014
Master's degree, Gestion des ressources humaines / administration du personnel, général
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2010 — 2014
Ingénieur, Génie Industriel
Institut national polytechnique de Toulouse 2010 — 2014
Engineer's degree, Industrial Engineering
IAE Toulouse 2012 — 2013
Master 1, Human Resources Management/Personnel Administration, General, Auditeur Libre
Lycée Paul Cézanne 2007 — 2010
Classes Préparatoires aux Grandes Ecoles, MPSI - MP
Lycée Polyvalent Pasteur 2004 — 2007
Baccalauréat Scientifique, Spécialité Mathématiques, Mention Très Bien
Experience
SEPPIC (entité Air Liquide) March 2015 - Present
Basket31.tv January 2014 - Present
Catch & Shoot August 2012 - Present
Telespazio Spa April 2014 - September 2014
INP Toulouse - Institut National Polytechnique de Toulouse April 2012 - March 2014
Eurogiciel April 2013 - September 2013
KOBALTT August 2012 - September 2012
Campus de Bissy July 2012 - July 2012
TENESOL Technologies July 2011 - August 2011
Skills
Microsoft Office, Basket-ball, PowerPoint, Employee Training, Management, Communication, Project Management, Microsoft Excel, MS Project, Competency Management, English, French, Human Resources
Benjamin Roussel
Contact Engineer INFINEUM
Chemicals
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2010 — 2013
Ingénieur, Génie chimique (par apprentissage)
IUT Montpellier 2008 — 2010
DUT (Bac +2), Chimie (analytique, organique, minérale, génie chimique)
Experience
Infineum July 2014 - Present
Gélatines Weishardt September 2010 - September 2013
Axens March 2010 - June 2010
Axens July 2009 - August 2009
Axens July 2008 - August 2008
Skills
Engineering, Chemistry, HACCP, Microsoft Excel, TPM, Ingredients, Food Industry, Supply Chain Management, Project Management, Analytical Chemistry, Quality System, Food Processing, Lean Manufacturing, Food Technology, R&D, Food Manufacturing, Export, Management, Project Planning, 5S, Continuous Improvement, MS Project, Food Science, Project Estimation
Benoit Hernandez
Référent Simulation Mécanique Structures GMP chez Renault
Automotive
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2007 — 2010
Ingénieur matériaux, Durabilité des Matériaux et des Structures
Ecole Primaire
IUT Le creusot
LAVOISIER
Experience
Renault May 2014 - Present
Renault October 2011 - May 2014
Digital Product Simulation September 2010 - October 2011
Renault March 2010 - September 2010
SINTEF July 2009 - October 2009
Messier Services April 2007 - July 2007
Skills
Matlab, Catia, ANSA, Optistruct, Powertrain, Mechanical Engineering, Gearbox, Abaqus
Benoît Lombard
Sales Manager at KSB
Machinery
Education
1995 — 1998
Ingénieur, Chimie
Experience
KSB April 2012 - Present
PCM SA 2009 - May 2012
PCM SA 2005 - 2008
PCM SA 2003 - 2005
Bernard GILLY
Ingénieur 1er Assistant Exploitation
Chemicals
Education
2005 — 2009
2006, Chimie
Experience
Versalis SpA March 2014 - Present
Polimeri Europa France September 2009 - March 2014
Polimeri Europa France May 2007 - September 2009
Skills
Aspen Plus, Engineering, Project Engineering, Process Simulation, Chemistry, Petroleum, Process Safety, Process Engineering, Plastics, Petrochemical, English, Polymers, Aspen HYSYS, Chemical Engineering, Génie chimique, P&ID
Brian Mathé
Auteur, réalisateur, producteur & bloggueur
Leisure, Travel & Tourism
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2007 — 2010
Master of Science (M.S.), Industrial Engineering
Norges teknisk-naturvitenskapelige universitet (NTNU) 2009 — 2009
Experience
Solidream May 2011 - Present
BNP Paribas August 2010 - April 2011
Thales Avionics 2010 - 2010
Skills
Team Management, VBA, English, Energy, Project Planning, Risk Management, Project Management, Renewable Energy, Gestion de projet, PowerPoint, Business Strategy, MS Project, Change Management, Access, Management, Project Finance, Matlab, French, Microsoft Excel, Microsoft Office
Bruno Abate
Acheteur MP chez Arkema
Chemicals
Education
ESSEC - ESSEC Business School 2003 — 2004
MS SIAI, 2004
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 1999 — 2002
Lycee Saliege
Experience
Arkema November 2014 - Present
Arkema September 2010 - October 2014
Arkema July 2007 - September 2010
Arkema February 2005 - July 2007
Camille BOUET
Ingénieur Génie des Procédés
Oil & Energy
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2012 — 2015
Diplôme d'ingénieur, Génie des Procédés, En cours
Université Paul Sabatier (Toulouse III) 2010 — 2012
DUT, Génie chimique - Génie des Procédés, Obtenu
Experience
Air Liquide September 2012 - Present
Air Liquide March 2015 - July 2015
Rousselot April 2012 - June 2012
Skills
Énergie, Transfert thermique, Aspen Plus, Thermodynamique, VBA, Génie chimique, AutoCAD, Aspen HYSYS, Simulation numérique
Camille Flament
Ingénieur doctorante en sciences des matériaux chez CEA Commissariat à l'énergie atomique et aux énergies alternatives
Research
Education
Institut polytechnique de Grenoble 2012 — 2015
Doctoral school
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2011 — 2012
Master's degree, Materials Nanomaterials and Multimaterials Science
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2009 — 2012
Diplôme d'ingénieur, Sciences et génie des matériaux
Lycée Lavoisier 2007 — 2009
Preparatory classes for entrance exams into national engineering school
Experience
CEA - Commissariat à l'énergie atomique et aux énergies alternatives October 2012 - Present
CEA - Commissariat à l'énergie atomique et aux énergies alternatives March 2012 - August 2012
Department of Engineering at the University of Cambridge July 2011 - September 2011
Skills
High Resolution..., Science des matériaux, Microscopie..., Métallurgie, Caractérisation, Electron Energy Loss..., R&D
Camille MARIE
Process Tools Manager at Air Liquide
Chemicals
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2009 — 2012
Classes Préparatoires aux Grandes Ecoles PCSI-PC*, Lycée Victor Hugo de Caen (FR) 2007 — 2009
Experience
Air Liquide May 2014 - Present
Air Liquide October 2012 - April 2014
Veolia Environnement March 2012 - August 2012
GlaxoSmithKline July 2011 - September 2011
IPDiA July 2010 - July 2010
Skills
Process Engineering
Camille Weber
Process Engineer chez Axens
Oil & Energy
Education
IFP School 2013 — 2014
Master's Degree, Petroleum and Process Engineering
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2010 — 2013
Engineer diploma, Chemical Engineering
Université de Montréal - Ecole polytechnique de Montréal 2012 — 2012
Exchange semester
Lycée Pothier 2008 — 2010
Preparatory Classes, PCSI-PC*
Experience
Axens January 2015 - Present
Axens September 2013 - December 2014
TOTAL February 2013 - August 2013
École Polytechnique de Montréal July 2012 - January 2013
Skills
Génie chimique, Pétrole et gaz, Project Management, Énergie, Aspen HYSYS, Pompes, Oil & Gas Industry, Engineering, Pétrole, Microsoft Office, Instrumentation, Petroleum Engineering, Pétrochimie, Raffinerie, Process Engineering
Carole Couturier
Ingénieur Matériaux Développement Process STMicroelectronics
Electrical/Electronic Manufacturing
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2005 — 2006
Master Recherche en Nanomatériaux, Science des matériaux, AB
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2003 — 2006
Bac +5, Matériaux et Procédés
IUT de Saint Nazaire 2001 — 2006
DUT Mesures Physiques
Experience
STMicroelectronics April 2010 - Present
STMicroelectronics July 2006 - March 2010
LETI March 2006 - July 2006
Skills
Lean Manufacturing, Matériaux, Outils Lean, EDX, 5M, FIB, AMDEC, Physique du..., PECVD, SIMS, Microscopie..., Management technique, Technique de résolution..., R&D, Maîtrise statistique..., Microélectronique, Microscopie...
Carolina Da Ponte Alves
Responsable Support Technique Clients chez Holcim France
Building Materials
Education
2007 — 2010
Ingénieur
Experience
Holcim France April 2015 - Present
Holcim April 2012 - April 2015
Lafarge September 2010 - December 2011
Lafarge March 2010 - August 2010
Caroline Gierczynski
Customer Quality Engineer chez Edwards Vacuum
Semiconductors
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2002 — 2005
Engineer's degree, chemistry
ENSCL 2000 — 2002
Engineer's degree
lycée des Flandres 1996 — 2000
French high-school diploma
Experience
Edwards May 2012 - Present
CEA November 2010 - May 2012
Altis Semiconductor 2008 - 2010
SOITEC 2006 - 2008
Air Liquide 2005 - 2006
Skills
Design of Experiments, Failure Analysis, Microelectronics, FMEA, Semiconductor Industry, Lean Manufacturing, R&D, SPC, Characterization, Semiconductors, Metrology, Electronics
Caroline Louvet
Chargée d'affaires Réalisation chez SCIRPE
Construction
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2006 — 2009
Master of Engineering (M.Eng.), Industrial Engineering
Danmarks Tekniske Universitet / Technical University of Denmark 2008 — 2009
Master's degree, Hydrology and Water Resources Science
Experience
SCIRPE September 2011 - Present
SCIRPE September 2010 - September 2011
CNRS March 2009 - September 2009
Skills
Bentley Microstation, Gestion de projet, English, Project Management, AutoCAD, Wastewater Treatment
Caroline Sy
Ingénieur eau et assainissement chez Verdi Ingénierie
Environmental Services
Education
Université Paul Sabatier (Toulouse III) 2012 — 2013
Master's degree, Hydrologie, Hydrochimie Sol et Environnement
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2010 — 2013
Engineer's degree, Hydraulique et environnement
Classe préparatoire aux grandes écoles en Physique chimie 2007 — 2010
Physique chimie
Experience
Verdi Ingénierie February 2014 - Present
SAFEGE March 2013 - August 2013
Ecohydrology Research Group June 2012 - September 2012
VALGO August 2011 - August 2011
Skills
Ingénierie des processus, Génie chimique, Chimie, Anglais, Chemical Engineering, Eau, Gestion de projet, Chemistry, Water, English, Matlab
Catherine Ayral
Ingénieur de recherche au Laboratoire de Génie Chimique Toulouse / Chemical Engineering Research Center of Toulouse
Renewables & Environment
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2003 — 2005
Ingénieur, Génie Chimique
Université Paul Sabatier (Toulouse III) 1999 — 2003
Maîtrise des Sciences et Techniques, Procédés Physico-Chimiques
Experience
Laboratoire de Génie Chimique Toulouse / Chemical Engineering Research Center of Toulouse 2013 - Present
IUT Toulouse III Département Génie Chimique Génie des Procédés 2014 - 2014
Orège 2009 - 2013
ENSIACET - Laboratoire de Genie Chimique Toulouse / Chemical Engineering Research Center 2006 - 2009
Rhodia 2005 - 2005
Rhodia 2005 - 2005
Skills
Project Coordination /..., Environmental - Waste..., Quality Hygiene Security
Catherine PANTEL
Professeur des Universités
Research
Education
1985 — 1988
Ingénieur, Génie des Procédés
Cecile Santos
PhD Student chez Université Paul Sabatier and CNRS
Chemicals
Education
Université Paul Sabatier (Toulouse III) 2012 — 2015
Research Doctorate, Chimie - Biologie - Santé
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2009 — 2012
Diplôme d'ingénieur, Chimie
Experience
LSPCMIB, UMR5068, Université Paul Sabatier / CNRS October 2012 - Present
Universidade de São Paulo May 2014 - July 2014
Pierre Fabre March 2012 - September 2012
Skills
Science, Synthèse organique, Anglais, Recherche, Biologie moléculaire, Chimie médicinale, Microsoft Office, Drug Design, Modélisation moléculaire, Gestion de projet, Chimie
Cedric Paris
Project & Product Manager at Amadeus
Information Technology and Services
Education
HEC School of Management 2005 — 2007
Masters (Continuing Education, IAE - HEC Paris), Business Administration
Institut d'Administration des Entreprises 2005 — 2007
Masters (Continuing Education, IAE - HEC Paris), Business Administration
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 1994 — 1997
Engineer, Process Engineering
Experience
Amadeus August 2012 - Present
Amadeus January 2010 - August 2012
Amadeus June 2008 - December 2009
Saint-Gobain July 2004 - May 2008
The Salvation Army January 2003 - June 2004
Price Waterhouse Management Consultants September 2001 - October 2002
Air France July 1999 - June 2001
Atos Origins February 1998 - June 1999
BP January 1997 - September 1997
Skills
Financial Reporting, .NET, Project Management, Supply Chain Management, Controlling, International Project..., Product Management, Project Portfolio..., Team Management, E-commerce, Travel Management, Business Process, Change Management, SAP, E-procurement, Program Management, AeTM, PMP, Business Analysis, Management Consulting, Purchasing, Business Intelligence, Accounting, Team Leadership
Cedric Samuel
Polymer R&D engineer at MATERIANOVA / UMONS
Think Tanks
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2004 — 2008
Engineer's degree, Polymer/Plastics Engineering
Université Paul Sabatier (Toulouse III) 2004 — 2006
University Technology Diploma (DUT Mesures Physiques), Materials and physico-chemical analysis
Experience
SMPC / MATERIANOVA January 2012 - Present
Ingénirie des matériaux plastiques (UMR 5223) / IMP@UJM October 2008 - December 2011
Charles Perrot
Consultant Environnement chez ERM: Environmental Resources Management
Renewables & Environment
Education
Norges teknisk-naturvitenskapelige universitet (NTNU) 2007 — 2007
Environmental Management and Industrial Ecology
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2004 — 2007
Ingénieur, Ingénieur Génie Chimique et Environnement
Experience
ERM: Environmental Resources Management February 2011 - Present
Total February 2009 - March 2010
TOTAL December 2007 - February 2009
Skills
Internal Audit, Environmental..., Safety Management..., Energy, Process Engineering, Auditing, Environmental..., Petrochemical, Energy Industry, Petroleum, Gas, Environmental Compliance, Project Management, Oil/Gas, External Audit, Engineering, Chemical Engineering
Charles Poulain
Etudiant en troisième année à l'ENSIACET
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2013 — 2016
Ingénieur diplomé par l'Etat, Génie des procédés (Process Engineering) Option Gestion des Systèmes Industriels - EPI
Classes Préparatoires - Lycée Buffon (PCSI-PC*) 2011 — 2013
Experience
Intrepid Aviation May 2015 - August 2015
MARS CHOCOLAT FRANCE July 2014 - July 2014
Skills
Ingénierie des processus, Modélisation, Thermodynamique, Simulations, Gestion de projet
Charlotte Petit
PhD student (University of Geneva)
Research
Education
University of Geneva 2012 — 2015
PhD in Pharmaceutical Sciences, Pharmacochemistry and Phytochemistry
Dublin City University 2010 — 2011
Pharmaceutical Sciences
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2008 — 2011
Master'degree, Chemical Engineering
Classe Préparatoire aux Grandes Ecoles
Classe Préparatoire aux Grandes Ecoles
Experience
University of Geneva December 2011 - Present
Université de Genève March 2011 - September 2011
Weleda AG June 2010 - August 2010
Skills
Science, Microsoft Office, UHPLC, Chimie pharmaceutique, Mass Spectrometry, Analytical Chemistry, Génie chimique, Chemistry, HPLC, Scientific Writing, Research, Drug Discovery, R&D
Christian Germain
Project Manager construction/ Safety consultant
Management Consulting
Education
1974 — 2005
Ingenieur, Genie chimique/Construction usines
Christine Bracken
European Regulatory Affairs
Chemicals
Education
Dublin Institute of Technology 2010 — 2012
MSc. Pharmaceutical Quality Assurance and Regulation
Senior College Dun Laoghaire 2009 — 2010
FETAC Level 6 Certificate in Advanced Web Design
Limperts Academy of Design 2008 — 2009
Diploma in Image and Fashion Styling
Dublin City University 2004 — 2008
BSc. Chemistry with French
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2006 — 2007
Erasmus Year
Experience
Barclay Crop Protection June 2014 - Present
Barclay Crop Protection May 2011 - June 2014
Barclay Crop Protection February 2010 - May 2011
Intel Corporation September 2008 - August 2009
Skills
Validation, HPLC, Chromatography, Chemistry, Laboratory, Teamwork, Web Design, Regulatory Affairs, GMP, SharePoint, SOP, Analytical Chemistry, R&D, Pharmaceutical Industry, GLP, Process Improvement, Quality Assurance, Process Engineering
Christophe LEBLANC
Responsable Développement Projet Eolien Offshore ENGIE (La Compagnie du Vent)
Renewables & Environment
Education
Institut national polytechnique de Toulouse - Ecole Nationale Supérieure de Chimie 1994 — 1995
Diplome de Recherche Universitaire - Ingénieur, Chimie
1993 — 1994
Master of Science, Chemistry
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 1991 — 1994
Ingénieur, Chimie
Lycée Jacques Decour 1989 — 1991
Prépas, Scientifiques
Lycée Louis le Grand 1987 — 1988
Experience
La Compagnie du Vent - GDF SUEZ February 2011 - Present
Mold-Tech Engraving June 1999 - November 2009
AirLiquide December 1995 - June 1999
Skills
Wind Turbines, Management, Énergie renouvelable, Industrial Engineering, Project Management, Energy, Gestion de projet, Relations publiques, Offshore Wind, Negotiation, Énergie, Development Projects, Lobbying, Développement commercial, Key Account Management, Énergie éolienne, Wind, concertation, Stakeholder Management, Business Units, Renewable Energy, Offshore Wind Energy, Public Relations, Business Development
Christophe Le Boucher
Production technologist heavy oil field (NL)
Oil & Energy
Education
2008 — 2010
Master, Petroleum engineering, economics and management
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2005 — 2008
Master of Science (M.Sc.), Chemical Engineering
Experience
Shell August 2014 - Present
Shell Oil Company July 2013 - August 2014
Shell June 2012 - June 2013
Shell April 2010 - June 2012
Shell lubricants January 2009 - October 2009
TOTAL S.A. January 2008 - September 2008
Claire Bertrand
Ingénieur Qualification/Validation
Pharmaceuticals
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2014 — 2015
Master 2 professionnel, "Procédés de production, qualité et contrôle des produits de santé"
Université Blaise Pascal (Clermont-II) - Clermont-Ferrand 2012 — 2013
Master II, Synthèse organique et biocatalyse
ENSCCF 2010 — 2013
Ingénieur chimiste, Chimie organique fine et industrielle
Lycée Lapérouse - Albi 2007 — 2010
CPGE - option PC
Experience
SEPPIC - Filiale du groupe Air Liquide au sein de l’activité Santé February 2015 - Present
Sanofi March 2013 - September 2013
University College Dublin June 2012 - August 2012
laboratoire d'analyse biomédicale June 2011 - July 2011
Skills
génie chimique, Anglais, extraction de composés..., Synthèse organique, contrôle qualité, validation de procédés, Assurance qualité, Techniques de..., audit qualité, management de la qualité
Claire Ferreira Da Rocha
Ingénieur Optimisation des Procédés chez BIO SPRINGER
Food Production
Education
2007 — 2010
Ingénieur, Génie des Procédés et Informatique
Lycée Jacques Amyot Melun 2005 — 2007
Classes Préparatoires aux Grandes Ecoles, Physique-Chmie
Experience
Lesaffre July 2014 - Present
Lactalis December 2013 - June 2014
Lactalis October 2012 - November 2013
Lactalis February 2013 - May 2013
Lactalis November 2011 - October 2012
COSMEVA - Groupe FAREVA September 2010 - June 2011
Chanel March 2010 - August 2010
UFRJ July 2009 - September 2009
Skills
Microsoft Office, Lean Manufacturing, Performance Management, 5S, Production Management, Access, SAP
Claire PERROT
En poste (secteur : Biotechnologie)
Biotechnology
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2009 — 2012
Master's degree, Chimie
IUT 2007 — 2009
DUT, Chimie
Experience
Eurofins 2012 - 2013
Claude DJOLOLIAN
Chef d'entreprise, Baikowski
Chemicals
Education
1962 — 1965
chimie
Cyril Guillou
Consultant Gestion de projet chez PLANITEC
Management Consulting
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2014 — 2015
Validation du Master 2 (Ingénieur), Génie des Systèmes Industriels
Ecole des Mines d'Albi-Carmaux 2012 — 2015
Diplôme d'ingénieur, Génie industriel
Lycée Clemenceau 2010 — 2012
Attestation de fin de CPGE
Experience
Mission en gestion de projet chez SNECMA July 2015 - Present
PLANITEC Groupe SETEC March 2015 - August 2015
Stiftung SPI / Nl. Brandenburg May 2014 - August 2014
Acthéa September 2013 - May 2014
E. Leclerc - rayon poissonerie December 2013 - December 2013
La Banque Postale August 2013 - August 2013
La Banque Postale August 2012 - August 2012
The Walt Disney Company July 2009 - August 2009
Skills
Suite office, Gestion de projet, Planification de projets, Projet Microsoft, Optimisation, Base de données, Solidworks, Algorithmes, Ingénierie, Gestion des risques, VBA, Lean Management, Microsoft Excel, Matlab, Microsoft Word
Cyril Henry
Ingénieur chimiste à ORIL INDUSTRIE
Chemicals
Education
University of Southampton 2009 — 2014
Docteur en chimie, Chimie
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2006 — 2009
Diplôme d'ingénieur, Chimie
Université Paul Sabatier (Toulouse III)
Master 2 (M2), Chimie organique
Experience
ORIL INDUSTRIE March 2014 - Present
ORIL INDUSTRIE March 2014 - September 2015
GSK 2010 - 2012
Pierre Fabre March 2009 - September 2009
CIPR (Centre for Integrated Petroleum Research) July 2008 - September 2008
Skills
Chimie organique, Purification, chimie en continue, analyse in-situ, cristallisation, Chimie analytique, Lean Six Sigma
Cédric Charles-Alfred
Ingenieur procédés R&D chez SOITEC
Semiconductors
Education
Université de Nantes 2006 — 2009
PhD, Materials Science
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2003 — 2006
Diplôme d'ingénieur en Matériaux, Physico-chimie des materiaux
lycee champollion 2000 — 2003
Concours d'entrée aux ENSI, Chimie physique
Experience
SOITEC January 2010 - Present
Skills
FMEA, Manufacturing, Microelectronics, Thin Films, Semiconductor Industry, Materials Science, Failure Analysis, Characterization, Electronics, R&D, Design of Experiments, Silicon, Metrology, SPC, CMOS, Semiconductors
Céline DUFOUR
Ingénieur Procédés / Validation
Pharmaceuticals
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2004 — 2007
Ingénieur Génie Chimique, Ingénierie chimique
Experience
Laboratoires URGO September 2012 - Present
Skills
cGMP, Risk Analysis, Project Engineering, Project Management, Microsoft Office, Quality Assurance, Teamwork, BPF, Equipment Qualification, Process Validation, Process Engineering, Pharmaceutical Industry
Damien Lecointre
Ingénieur Conduite d'Essais
Oil & Energy
Education
2008 — 2011
Ingenieur, Génie des Procédés
Lappeenrannan teknillinen yliopisto
Energy and Environmental Technology
Experience
AREVA NP October 2012 - Present
Assystem October 2011 - September 2012
AREVA Federal Services March 2011 - September 2011
ENDEL GDF-SUEZ July 2010 - August 2010
ENDEL GDF-SUEZ July 2009 - August 2009
Skills
Commissioning, Matlab, Project Engineering, Power Generation, CFD, Nuclear, Process Engineering, Renewable Energy, Power Plants, Project Management, Process Simulation, Engineering, Energy
Dana JORDA-CRISTEA
Cosmetic Raw Materials Purchasing Manager chez LVMH
Cosmetics
Education
2000 — 2003
doctorat, Sciences des Procédés
Universitatea „Politehnica” din București 1996 — 2000
Engineer's degree, Chemistry
Experience
LVMH December 2011 - Present
Parfums Christian Dior January 2010 - December 2011
Parfums Christian Dior May 2006 - February 2010
Centre Régional d’Innovation et de Transfert de Technologies CATAR CRITT Agroressources, Toulouse January 2004 - April 2006
Skills
SAP (QM, WM, BW), Supply Chain Management, Luxury Goods, Quality Auditing, SRM, Supply Chain, Quality Control, Supplier Performance, Fragrance, Analytical Chemistry, Purchase Management, Team Management, Cosmetics, Process Improvement, Strategic Sourcing, Purchasing
David Zapico Alvarez
Research Engineer
Mining & Metals
Education
Ecole Centrale Paris 2011 — 2014
PhD Thesis, Materials Science
Universidad de Oviedo 2002 — 2010
Chemical Engineering
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2008 — 2009
Chemical Engineering
Experience
ArcelorMittal March 2014 - Present
ArcelorMittal March 2011 - February 2014
Ecole Centrale Paris March 2011 - February 2014
ArcelorMittal April 2010 - September 2010
Total E&P February 2009 - August 2009
Skills
Materials Science, Engineering, R&D, Steel, Métallurgie
Denis Chretien
LNG process engineer at TOTAL
Oil & Energy
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 1979 — 1980
Diplôme de la Section Spéciale, Chemical Engineering, Diplôme de la Section Spéciale
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 1976 — 1979
1979, Chemistry, Diplôme de l'école
Experience
TOTAL June 1999 - Present
SOFREGAZ December 1995 - June 1999
Air Liquide September 1985 - December 1995
Technip October 1985 - September 1990
Dominique BOUCHEZ
Coordination industrie pétrolière française concernant la Qualité des produits et les biocarburants (UFIP)
Oil & Energy
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 1975 — 1977
Docteur, Génie Chimique
ENSEEIHT - Ecole Nationale Supérieure d'Electrotechnique, d'Electronique, d'Informatique, d'Hydraulique et des Télécommunications 1975 — 1975
Ingénieur, Mathématiques Appliquées
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 1971 — 1974
Ingénieur, Génie Chimique
Experience
UFIP June 2010 - Present
TOTAL RM November 2008 - June 2010
TOTAL RM January 2001 - October 2008
Elf Antar France April 1998 - December 2000
Skills
Fuel Additives, Quality Management, Petroleum Refining, Biofuels, Jet Fuel, Petroleum Products, Heating Oil
Dominique Carrasco
Deputy Director Quality Program & Projects at Pierre Fabre
Pharmaceuticals
Education
1988 — 1989
DEA Génie des Procédés et Informatique, Génie des procédés Physico-Chimiques
Skills
Quality Assurance, Project Management, Team Management, Project Coordination, Non-profits..., Process Improvement, Organization, Teamwork, Management, Strategy, Communication, Public Speaking, Program Management, Business Strategy, Team Leadership, Leadership, Events Organisation, Quality Management, Process Modeling, Management Consulting, Change Management, Marketing Strategy, Business Change..., CMMI, Software Quality..., Communication Skills
Dounia Tazi
Head of expertise & consultancy dpt chez ICSI
Security and Investigations
Education
2006 — 2008
Doctorat, Systèmes industriels
2000 — 2003
Ingénieur, Chimie - systèmes industriels
ICSI
Experience
ICSI 2013 - Present
ICSI 2009 - 2013
Total Raffinage Marketing December 2005 - December 2008
Skills
Leadership, Formation des salariés, Change Management, Coaching, Formation de leader, Consulting, Analyse de données, Strategy, Gestion des risques, formation IRP, Anglais, Gestion de projet, Management, Formation, Évaluation du risque, Analyses, Project Management, Accompagnement, Ingénierie, Recherche
Elena Camarasa Aramburu
Senior European Supply Chain manager Contractmanufacturing at Kellogg Company
Food Production
Education
Universidad Complutense de Madrid 2003 — 2008
Chemical Engineering (MSc equivalent)
Bureau Veritas business school 2011 — 2011
Business Management Course (200h)
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2007 — 2008
Master of Chemical Engineering
Experience
Kellogg Company April 2014 - Present
Kellogg Company June 2012 - March 2014
Procter & Gamble April 2008 - June 2012
Procter & Gamble July 2007 - September 2007
Skills
UPS, Cross-functional Team..., Waste Reduction, Project Engineering, Project Coordination, Microsoft Office, Engineering, Lean Manufacturing, Sustainability Strategy, Program Management, Great People Skills, Energy Efficiency, Problem Solving, FMCG, Water Management, Food & Beverage, Cost Management, MS Project, Languages, University Relations, People Skills, Innovation, SAP, Project Planning, Management, Team Building, Water Treatment, Sustainability
Elisabeth (Loose) Richard
Biotechnology & Analytical Chemistry Teaching
Biotechnology
Education
Cranfield University 2004 — 2010
PhD, Cranfield Health
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2001 — 2004
MSc Chemistry
Université Paris Sud (Paris XI) 1999 — 2001
DEUG
Université Paris Descartes 1997 — 1999
PCEM1
Lycée Marie Curie (92) 1989 — 1997
Baccalauréat
Experience
Cranfield University 2004 - 2008
Cranfield University 2004 - 2007
Sanofi-Synthelabo January 2004 - January 2004
Institut Curie June 2003 - August 2003
Bayer MaterialScience June 2002 - August 2002
Skills
Chemistry, Biotechnology, Biosensors, Laboratory, Data Analysis, Biosensors (Glucose,..., ELISA tests, ELISA, Electrochemistry, HPLC, Biacore, Analytical Chemistry, Science, DNA, Teaching, ISO 17025, Immunoassays, Microbiology, BIAcore system, Chromatography, Matlab, Research
Elodie Carsalade
Ingénieur matériaux composites chez Assystem
Plastics
Education
UPS Toulouse 2005 — 2009
PhD student : doctorante (CNES/CNRS), polymères, PET, polyesters
Université Paul Sabatier (Toulouse III) 2004 — 2005
Master 2 Recherche Sciences des Matériaux, Nanomatériaux et Multimatériaux, physique
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2002 — 2005
Engineer / Ingénieur Matériaux et Procédés, polymères et composites
IUT Mesures Physiques 2000 — 2002
DUT Mesures Physiques, Physico-chimie
Experience
Assystem October 2011 - Present
Airbus Opérations SAS January 2011 - September 2011
CNES October 2005 - October 2009
CIRIMAT, L2P March 2005 - August 2005
Zodiac Maritime June 2004 - September 2004
PSA Peugeot Citroën July 2003 - July 2003
AGA Medical July 2002 - August 2002
Linde Gas April 2002 - June 2002
Elodie Perche
Process Engineer (Volunteer for International Experience Coop Placement) at TOTAL
Chemicals
Education
Institut national polytechnique de Toulouse 2012 — 2013
Master's degree, Process and Environmental Engineering, Magna Cum Laude distinction
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2010 — 2013
Engineer's degree, Chemical Engineering
Lycée Bellevue 2008 — 2010
Experience
TOTAL May 2015 - Present
TOTAL May 2014 - Present
Ineos March 2013 - August 2013
Faculty of Science and Technology, Thammasat University July 2012 - September 2012
TOTAL Oil depot August 2011 - August 2011
Voies navigables de France August 2010 - August 2010
Skills
Process Modeling, Process Design, Process Simulation, Process Engineering, Process Control, Computing, Process Optimization
Elvira Rodriguez Alonso
Docteur en Génie des Procédés et de l'Environnement chez CEA Commissariat à l'énergie atomique et aux énergies alternatives
Research
Education
Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques 2011 — 2012
Ingénieur en Génie Chimique - option Procédés pour la Chimie Fine et les Bioindustries
Universidad Complutense de Madrid 2007 — 2012
Diplôme d'ingénieur, Génie Chimique, 15/20
Conservatoire Adolfo Salazar
Diplôme Professionnel de Musique, Violon
Lycée Sagrada Familia
Baccalauréat, Double Diplôme : Sciences de la Vie + Technologique, 18,2/20
Experience
CEA - Commissariat à l'énergie atomique et aux énergies alternatives October 2012 - Present
CEA - Commissariat à l'énergie atomique et aux énergies alternatives March 2012 - August 2012
Skills
Chimie, Science, R&D, Génie chimique, Chemical Engineering
Emeline Durand
Responsable Production
Food Production
Education
2002 — 2005
Ingénieur en Génie Chimique
Experience
Herbal T September 2012 - Present
Kerry Ingredients October 2006 - Present
Charabot April 2006 - September 2006
Skills
Chemical Engineering, Organic Chemistry, Production Managment, Management, Natural Products, Aromatics, Production Planning