Universidad Politécnica de Madrid, Madrid Area, Spain
Technical University of Madrid (Universidad Politécnica de Madrid, UPM) is the oldest and largest of all Technical Universities in Spain. It has more than 3,000 faculty members, around 30,000 undergraduate students, and over 8,000 graduate students.
UPM is made up of 21 Technical Schools and Faculties covering Architecture, Engineering and Sport disciplines. Most of its centers are located in the urban district of Madrid, in the City University of Madrid (north of Madrid), in the Montegancedo Campus (west of Madrid), and in the South Campus (southeast of Madrid), although some of them of more recent creation are spread in the outskirts.
UPM is made up of 21 Technical Schools and Faculties covering Architecture, Engineering and Sport disciplines. Most of its centers are located in the urban district of Madrid, in the City University of Madrid (north of Madrid), in the Montegancedo Campus (west of Madrid), and in the South Campus (southeast of Madrid), although some of them of more recent creation are spread in the outskirts.
Universidad Politécnica de Madrid Alumni
Carlos Carrero González
Fulltime MBA candidate, class of 2017 at IESE Business School
Management Consulting
Education
Massachusetts Institute of Technology 2010 — 2010
Master Thesis, Aeronautical Engineering
Ecole nationale supérieure de l'Aéronautique et de l'Espace 2008 — 2010
Ingénieur SUPAERO - ISAE, Aeronautical Engineering
Universidad Politécnica de Madrid 2004 — 2008
Aeronautical engineer, Ranked 1st of the class
Experience
The Boston Consulting Group 2013 - 2015
The Boston Consulting Group 2010 - 2013
Skills
Private Pilot’s License
Carlos Carretero Sánchez
Project Manager at Airbus Defense and Space
Defense & Space
Education
Universidad Politécnica de Madrid 1994 — 2000
Ingeniería Superior, Telecommunications Engineering
Tampere University of Technology 2000 — 2001
Master of Science (M.S.), Telecommunications Engineering
Universidad Nacional de Educación a Distancia - U.N.E.D. 2007 — 2015
Grado, Business Administration and Management, General
Experience
CRISA (an Airbus Defence and Space company) September 2006 - Present
TECNOBIT September 2005 - September 2006
Eli Lilly and Company March 2004 - September 2005
Vodafone October 2002 - March 2004
Tampere University of Technology September 2000 - February 2002
Skills
Systems Engineering, Space Systems, Project Management, New Business Development, Engineering, Business Analysis
Carlos Casanueva Nárdiz
Associate Professor at ESCP Europe
Education Management
Education
Universidad Politécnica de Madrid 2003 — 2007
Doctor of Philosophy (PhD), Financial Advice Industrialization, Summa Cum Laude
University of Pennsylvania - The Wharton School 1989 — 1991
Master of Business Administration (MBA), Finance and Strategy
Universidad Politécnica de Madrid 1980 — 1986
Undergraduate, Engineering, Ranked first in my speciality and sixth in the total promotion
Experience
ESCP Europe September 2015 - Present
Banco Santander April 2014 - January 2015
Banco Santander February 2011 - March 2014
Banco Santander November 2009 - February 2011
Universidad Politecnica de Madrid September 2003 - November 2009
Citi September 1998 - January 2003
Banco Central Hispano October 1997 - September 1998
Banco Central Hispano May 1994 - October 1997
McKinsey & Company September 1991 - May 1994
McKinsey & Company June 1990 - July 1990
Skills
Strategy, Corporate Finance, Entrepreneurship, Valuation, Strategic Planning, Team Leadership, Insurance, Change Management, Business Planning, Management, Financial Modeling, Spanish, Management Consulting, Mergers & Acquisitions, Marketing, Portfolio Management, Business Strategy
Carlos Casas Arroba
Ingeniero de Montes
Ranching
Education
Universidad Politécnica de Madrid 2015 — 2019
Ingeniería, ingeniería de montes
Universidad Politécnica de Madrid 2005 — 2014
Ingeniero de montes, Silvopascicultura
Experience
Autónomo May 2013 - Present
AEMA Hispánica May 2015 - June 2015
AEMA Hispánica January 2015 - April 2015
AMUS (Acción por el Mundo Salvaje) December 2014 - February 2015
Proyecto fin de carrera February 2013 - June 2014
Junta de Extremadura June 2005 - August 2005
Skills
Physics, Protopo, AutoCAD, Global Mapper, Cosmology, Animal Behavior, LiDAR, Literature, Biology, IHA7, Evolution, Ornithology, Flora & Fauna, Ecología, Music, ArcGIS, Microsoft Office, Topographic Surveys, Hydrology
Carlos Castaño Climent
Técnico responsable de control de proyectos de I+D en CDTI (Organismo público español que concede ayudas a la I+D)
Government Administration
Education
Universidad Politécnica de Madrid
Ingeniero Superior Aeronáutico., Especialidad Aeronaves
Experience
CDTI December 2005 - Present
EADS CASA ESPACIO June 2000 - December 2005
Aviosystem December 1999 - May 2000
EADS CASA ESPACIO February 1999 - November 1999
Skills
Pruebas, Technology Evaluation, French, Analytical Skills, Engineering, Government, Eagerness to Learn, Project Management, Open Minded, English, Catalan, Aeronautics, Ingeniería, Negotiation, Microsoft Office, Public Sector, Spanish, Industria aeroespacial, I+D, Inglés, Test Management, Español, Aerospace, Team Leadership, Gestión de programas, Technical Writing, Gestión de proyectos
Carlos Castedo Vaquero
Delineante
Architecture & Planning
Education
Instituto TEIDE IV
Delineante, FP II
Universidad Politécnica de Madrid
Técnico en Fotogrametría
Experience
Golden Vending S.L. 2010 - 2012
TDS s.l. January 2008 - December 2008
ALMETAL January 2006 - December 2007
AJUDAR May 2005 - January 2006
Estudio de Arquitectura GSM April 2000 - May 2005
Skills
ArcGIS, Presto, AutoCAD Architecture, Diseño interior, Gestión de proyectos, Microsoft Office, AutoCAD, AcutoCAD, 3D Studio Max, Planeamiento de..., SketchUp
Carlos Castellano Aldave
Responsable Centro I+D en Universidad Pública de Navarra
Research
Education
Universidad Pública de Navarra 2009 — 2010
Master, Comunicaciones
Universidad Politécnica de Madrid 1999 — 2001
Master, Gestión de la Innovación
Universidad Nacional de Educación a Distancia - U.N.E.D. 1981 — 1989
Ing. Industrial, Electrónica-Automática
IESE Business School 1984 — 1985
PDG, Dirección General
Experience
Universidad Pública de Navarra January 2008 - Present
Grupo Ros Casares July 2005 - August 2007
Coating Automotive January 2002 - December 2004
NACESA January 1985 - December 2001
Carlos Castillo Cava
Ingeniero informático en Itos Technologies
Airlines/Aviation
Education
Universidad Politécnica de Madrid 2005 — 2014
Ingeniero técnico aeronáutico
Experience
Canaryfly September 2015 - Present
Itos Technologies March 2015 - August 2015
Kit Printer 3D September 2014 - December 2014
Correos June 2013 - August 2013
Correos June 2006 - December 2011
Skills
Aeronaves, JavaScript, FPGA, Aircraft, Python, CATIA, Google Go language, Avionics, Raspberry Pi, Aeronautics, C++, 3D Printing, Electrónica, Diseño de sistemas de..., Aeronáutica, Aircraft Engines, Digital Signal..., Linux, Robótica, C (programación), kiCAD, Arduino
Carlos Castillo Rubio
Engineering Manager en Indra, PhD, PMP
Information Technology and Services
Education
Universidad Politécnica de Madrid 2003 — 2008
Doctor en Telecomunicación, Sistemas, Señales y Comunicaciones
Universidad Politécnica de Madrid 1997 — 2003
Ingeniero de Telecomunicaciones, Señales, Sistemas y Comunicaciones
Experience
Indra March 2009 - Present
INDRA November 2004 - March 2009
Universidad Politécnica de Madrid April 2002 - October 2004
Skills
Integration, Radio Frequency..., Testing, Algorithm Design, Software Project..., Requirements Analysis, Air Traffic Control, Project Management, Systems Engineering, Radar, Defence Sector
Carlos Castillo Rueda
Arquitecto
Architecture & Planning
Education
Universidad Politécnica de Madrid 1995 — 2009
Arquitecto
Experience
Estudio de Arquitectura Ecuevas October 2003 - Present
Fundación COAM October 2008 - October 2008
Fábrica Nacional de Moneda y Timbre - Real Casa de la Moneda November 2000 - August 2002
Carlos Castrejana
Director Técnico en ALBA MACREL Group
Machinery
Education
Universidad de Zaragoza 1994 — 2000
INGENIERO INDUSTRIAL
Universidad Politécnica de Madrid 2009 — 2009
CSA
Experience
ALBA MACREL Group August 2002 - Present
JUMAR Agricola December 2000 - August 2002
Carlos Castrillón Álvarez
Consultor BO/DS/BI Senior
Information Technology and Services
Education
Universidad Politécnica de Madrid 1983 — 1990
Lcdo., Informática
Experience
Techedge España February 2011 - Present
Apara Software 2005 - February 2011
Skills
•SAP Certified Support..., Business Objects, ETL, •SAP Certified..., •SAP Certified...
Carlos Castro Ruiz
Estudiante en Universidad Politécnica de Madrid
Education
Universidad Politécnica de Madrid 2014 — 2016
Carlos Cayon Marco
Head of Verification and Test Department en CRISA (an Airbus Defence and Space company)
Defense & Space
Education
Universidad Politécnica de Madrid 1986 — 1992
ingeniero superior aeronautico
Experience
CRISA (an Airbus Defence and Space company) October 2014 - Present
EADS Astrium Crisa January 2008 - October 2014
Gestair 2006 - 2007
Skills
Ingeniería de requisitos, Liderazgo de equipos, Planeamiento de..., Gestión de programas, Electrónica
Carlos Ceacero
R&D Consultant
Information Technology and Services
Education
Universidad Politécnica de Madrid 2014 — 2014
Experto en promoción y gestión de proyectos y actuaciones internacionales de I+D+i, Gestión de proyectos
Universidad Politécnica de Madrid 1998 — 2005
Ingeniero en Telecomunicación, Comunicaciones
Experience
Innoland Gestión de la Innovación I+D May 2012 - Present
Informática Gesfor S.A. (Gesfor Group) June 2007 - August 2011
HyC, Soluciones de Video y Comunicaciones S.L. April 2006 - June 2007
Soluziona S.A. January 2005 - April 2006
Skills
Management Consulting, Telecommunications, Semantic Technologies, Project Management, Business Strategy, R&D, Proposal Writing, Strategy, Innovation Management, Mobile Devices, Start-ups, Linux, Entrepreneurship
Carlos Cebrecos
RESPONSABLE COMERCIAL DEPARTAMENTO INSPECCIÓN en SCI, Servicios de Control e Inspección
Mechanical or Industrial Engineering
Education
Universidad Politécnica de Madrid
Experience
SCI, Servicios de Control e Inspección May 2010 - Present
TUV Rheinland Group June 2006 - May 2010
Carlos Centeno Córdova
M.Sc. Oil&Gas Engineering and Mining Engineer
Oil & Energy
Education
Universidad Politécnica de Madrid 2014 — 2015
Master of Oil & Gas Engineering, Ingeniería del petróleo y gas
Universidad Politécnica de Madrid 2008 — 2014
Ingeniería de Minas, Laboreo, Conocimientos de Materiales y Gestión de los Recursos Minerales
REPSOL 2013 — 2013
Gaviota, Ingeniería del petróleo. Especialidad en Ing. Perforación, Yacimientos y Producción de HC.
Colegio Retamar 2001 — 2008
Bachillerato, Tecnológico, 7.1
Experience
Obrascón Huarte Laín, S.A. (OHL) March 2015 - Present
Repsol July 2014 - January 2015
Universidad Politécnica de Madrid November 2013 - November 2014
Club Deportivo Minas , ETSI Minas y Energía. September 2012 - September 2014
Opta December 2010 - October 2012
N&W Global Vending July 2008 - August 2008
Skills
AutoCAD, Trabajo en equipo, Public Relations, Español, Protopo, Análisis, Inglés, Matlab, PowerPoint, Investigación y..., Analysis, English, Global Mapper, Redes sociales, Change Management, Gas, Microsoft PowerPoint, Microsoft Excel, Research, Photoshop, Team Leadership, TopoCal, Relaciones públicas, Energía, Ingeniería, Cambio organizacional, Petróleo y gas natural, Marketing, Gestión de proyectos, Planificación..., Eclipse, Engineering, Spanish, Social Media, RecMin, Strategic Planning, Liderazgo de equipos, Microsoft Office, Teamwork
Carlos Cerdeño Verdugo
Construction
Education
Universidad Politécnica de Madrid 2011 — 2012
Master Universitario en Gestión en Edificación, Construcción
2009 — 2010
Grado en Ingeniería de Edificación
2003 — 2008
Arquitecto Tecnico
Experience
Grupo Aldesa April 2013 - Present
Grupo Aldesa November 2008 - April 2013
IDOM April 2008 - July 2008
INACO Promociones y Obras, S.A. October 2007 - April 2008
Skills
Estrategia empresarial, Microsoft Office, Ingeniería, Construction, Construcción, Aprovisionamiento, Administración y..., Gestión de obras de..., Inglés, Planeamiento de..., Negociación, Ingeniería civil, Español
Carlos Cerezo Arce
Project Manager. European Commission
Information Technology and Services
Education
GIO Business School - UPM 1999 — 2000
Master, IT & MBA (MDSIC). [www.gio.upm.es]
Universidad Politécnica de Madrid 1991 — 1997
MSc & PhD Candidate. ETSIT [www.etsit.upm.es], Telecommunications Engineer
Colegio Agustiniano 1984 — 1991
Primary & Secondary School, [www.cagustiniano.com]
Experience
European Commission. DG REGIO [ec.europa.eu/regional_policy] 2013 - Present
Santander Bank UK. Produban UK 2012 - 2013
Santander Bank UK. ISBAN UK [www.isban.com] 2011 - 2012
Vocento [www.vocento.com] 2009 - 2010
Montejava. VASS Group [vassdigital.com] 2005 - 2008
SLAP. GAP Group [www.gapspain.com] 2003 - 2004
IT Deusto. Main-IT 2002 - 2002
BatMap 2001 - 2002
Telenium [www.telenium.es] 2000 - 2001
Qarana. Formerly GVI 1998 - 1999
Skills
SOA, Requirements Analysis, Business Analysis, Mobile Banking, Software Project..., ITIL, PMP, E-commerce, Team Management, Internet Business..., Web 2.0, Mobile Devices, IT Management, Team Leadership, Project Management, Data Center, M2M, Software Development, Scrum, Digital Marketing, Telecommunications, Internet Banking, SQL, Management, Oracle
Carlos Cervera
Head of Project Management Department at Schneider Electric
Electrical/Electronic Manufacturing
Education
Universidad Politécnica de Madrid 2009 — 2013
Master of Engineering (M.Eng.), Electrical and Electronics Engineering
Universidad Politécnica de Madrid 2000 — 2007
Bachelor of Engineering (B.Eng.), Electrical and Electronics Engineering
Ntra Sra Maravillas
Bachillerato
Experience
Schneider Electric September 2015 - Present
Schneider Electric October 2012 - August 2015
Schneider Electric January 2010 - October 2012
Schneider Electric December 2008 - January 2010
Schneider Electric September 2007 - January 2010
Skills
Electricity, Microsoft Office, AutoCAD, Matlab, Power Generation, English, Power Systems, Renewable Energy, Engineering, Electrical Engineering, Team Leadership, Project Engineering, Energy
Carlos Cevallos
Vice President at Banco Santander Asset Finance. HEC Paris MBA. Aerospace Engineering background at Airbus.
Investment Banking
Education
HEC Paris 2009 — 2010
MBA
Ecole nationale supérieure de l'Aéronautique et de l'Espace 2002 — 2003
Engineering Final Project
Universidad Politécnica de Madrid 1997 — 2003
National University of Singapore
Experience
Banco Santander May 2013 - Present
Banco Santander September 2010 - April 2013
Airbus March 2008 - December 2008
Airbus June 2007 - March 2008
Airbus March 2003 - June 2007
Carlos Checa Fernández
IBD Analyst at Nomura
Investment Banking
Education
Universidad Politécnica de Madrid 2007 — 2013
Ingeniero de Caminos, Canales y Puertos
Institut national polytechnique de Grenoble 2012 — 2012
Licentiate degree, Civil Engineering
Experience
Nomura International plc February 2014 - Present
Incus Capital Advisors July 2013 - October 2013
INGEROP July 2011 - August 2011
Skills
Inglés
Carlos Chinchilla Alvargonzalez
Country Manager de Spraying Systems Spain S.L.
Mechanical or Industrial Engineering
Education
Universidad Politécnica de Madrid 1982 — 1991
Ingeniero Industrial, Mecanica-Maquinas
Experience
Spraying Systems Spain S.L. 2003 - Present
Compañia Americana de Suministros, S.A. 1992 - 2003
Carlos Cid Rebollar
Construction Manager en Bovis
Construction
Education
Universidad Politécnica de Madrid 1990 — 1996
Arquitecto Técnico
Experience
Bovis January 2014 - Present
Bovis Lend Lease January 2013 - December 2013
Bovis Lend Lease March 2000 - December 2012
Demoliciones y Vaciados 1997 - March 2000
Elektra Arquitectura 1996 - 1997
Skills
Construcción, Negociación de contratos, Microsoft Project, Gestión de costes, Análisis del valor, Gestión de obras de..., AutoCAD, Gestión de contratos, Gestión de proyectos, Microsoft Office, Planeamiento de..., Negociación
Carlos Claramunt
Project & Transport Engineer en Hansa Heavy Lift GmbH
Shipbuilding
Education
Universidad Politecnica de Madrid 2011 — 2014
Materials Engineering Degree / Título de Grado en Ingeniería de Materiales, Materials Engineering
Universidad Politécnica de Madrid 2004 — 2010
Naval Architecht & Marine Engineer / Ingeniero Naval y Oceánico, Engineering & Shipbuilding / Ingeniería y construcción naval
Experience
Hansa Heavy Lift GmbH August 2015 - Present
Ocean Mechanics September 2013 - August 2015
Inforelec June 2015 - July 2015
Centro Profesional Nuevas Tecnologías April 2014 - December 2014
Muller Dordrecht September 2012 - September 2013
Barloworld Finanzauto May 2011 - June 2012
Easytech DDG CAD/CAM November 2010 - May 2011
Escuela Técnica Superior de Ingenieros Navales October 2010 - January 2011
Defender S.L. January 2010 - June 2010
ALE HEAVYLIFT October 2007 - February 2009
Skills
Cross-functional Team..., FEMAP, Corel Draw, Ingeniería, Heavy Equipment, rhinoscript, Matlab, Inspección, Autodesk Inventor, ANSYS, Heavy Lifting, Industria naval, Rhinoceros, Photoshop, Engineering, SAP, Marine propulsion, Ingeniería estructural, Heavy Engineering, Materials, Project Engineering, Project management, Materiales, Ingeniería mecánica, Microsoft Office, 3D Studio Max, Visual Basic, Energía, GHS, Mechanics, SharePoint, Ship Stability, Marine Engineering, Maxsurf, hydromax, Mechanical Engineering, NURBS, CAD, 3D, Ingeniería de proyectos, GIMP, Structural design, AutoCAD, Gestión de proyectos, Open Office, Microsoft Project, Yacht refitting, Marine Diesel Engines, Ingeniería naval, Diseño asistido por...
Carlos Climent
Architect, Project Manager, BIM expert
Architecture & Planning
Education
Glasgow Caledonian University 2014 — 2015
Master of Science (MSc), International Project Management, Distinction
Universidad Autónoma de Madrid 2012 — 2013
Master of Education (MEd), Art Teacher in Secondary Education, Distinction
Fundación Laboral de la Construcción 2010 — 2010
Postgraduate Certificate (PgC), Health & Safety Coordinator in Construction Works
Universidad Politécnica de Madrid 2009 — 2009
Postgraduate Certificate (PgC), Real Estate Valuation
Universidad Politécnica de Madrid 2008 — 2008
Postgraduate Certificate (PgC), Building Pathology
Official Association of Architects of Madrid 2005 — 2005
Postgraduate Certificate (PgC), Building Surveyor
Universidad Politécnica de Madrid 1998 — 2005
Master of Architecture (MArch), Building Specialist, Distinction
Universidad San Pablo-CEU 1995 — 1997
Bachelor of Architecture (BArch)
Experience
Carlos Climent Studio May 2005 - Present
IES Ramiro de Maeztu April 2013 - May 2013
Worldclaim August 2011 - February 2013
Navacerrada Town Council June 2010 - June 2011
Navacerrada Town Council December 2009 - May 2010
Daimler Spain Real Estate May 2008 - June 2009
Argimiro Inmobiliaria, S.L. October 2007 - April 2008
Dibar Arquitectura, S.L. September 2005 - September 2007
Empresa Municipal de la Vivienda y Suelo (Madrid) February 2007 - April 2007
Eurocontrol, S.A. October 2005 - April 2006
Skills
Revit, Inglés, Gestión de proyectos, Photoshop, Diseño interior, Gestión de obras de..., AutoCAD, Arquitectura, Español, Architecture, English, Mitigación del cambio..., Energy, SketchUp, Negociación, Diseño asistido por..., Diseño arquitectónico, Spanish, AutoCAD Architecture, Energy Efficiency, Microsoft Office, Project Management, Construcción, Teamwork, Negotiation
Carlos Cobo
Construcción Profesional
Construction
Education
Universidad Politécnica de Madrid 1998 — 2007
Ingeniero de Caminos
Salvador dali
Experience
Centro de Estudios de Puertos y Costas January 2011 - Present
Grupo Ortiz March 2006 - December 2008
EUROCONSULT March 2005 - August 2005
Carlos Codina Vélez
Naval Architect & Marine Engineer
Shipbuilding
Education
Universidad Politécnica de Madrid
Ingeniero Naval, Especialidad Arquitectura Naval
Experience
Astilleros de Huelva November 2007 - 2009
Skills
AutoCAD, Microsoft Office, Comercio Exterior, Naval Architecture, Sistema FORAN, SEO para comercio..., Tasación e inspección..., Técnico en..., Maxsurf, Matlab, Marine Engineering
Carlos Coll
CIO at Sociedad Española de Reumatología
Information Technology and Services
Education
Comillas Pontifical University 2003 — 2004
Master of Business Administration (M.B.A.)
Universidad Politécnica de Madrid 1988 — 1994
Engineer's Degree, Computer Engineering.
Experience
Fundación Española de Reumatología January 2010 - Present
Grupo SIC July 2003 - December 2009
OPEN MEDIA June 1998 - July 2003
IBEROFON: Sonomedia November 1996 - May 1998
Sistemas de Imagen y Control January 1996 - November 1996
Skills
Business Intelligence, Microsoft CRM, Team Management, Team Leadership, Website Development, Business Process..., IT Management, Business Process, New Business Development, Bluetooth, Microsoft SQL Server, Software Engineering, Android, Product Development, CRM, PMP, Web 2.0, Data Modeling, Mobile Applications, Project Management, Software Development, Agile Methodologies, Mobile Marketing, Small Business, Cloud Computing
Carlos Collados Carretero
Telecommunication Engineer and Mathematics Teacher
Information Technology and Services
Education
Universidad Politécnica de Madrid 1991 — 2004
Ingeniero Superior de Telecomunicaciones, Ingeniería eléctrica, electrónica y de comunicaciones
Universidad Internacional de La Rioja
Máster Universitario en Formación de Profesorado de Educación Secundaria Obligatoria y Bachillerato, Especialidad de Matemáticas
Experience
SATEC October 2012 - June 2014
SATEC September 2010 - October 2012
SATEC November 2007 - September 2010
SATEC December 2005 - November 2007
Grupo SMS November 2000 - December 2005
Skills
Telecomunicaciones, Telecommunications, Educación matemática, Centro de datos, Tecnología de Cisco, Matemáticas, Network Design, Protocolos de Internet, Network Security, Virtualization, Voz por protocolo..., Familia de protocolos..., Protocolo de..., IP, Virtualización, Gestión de servicios TI, ITIL, Seguridad de red, Networking, Conmutadores, Diseño de redes, IT Service Management, Tecnologías de la..., Redes informáticas, Switches, Data Center, Juniper Networks, Cisco Technologies, VoIP, Ingeniería de redes, TCP/IP
Carlos Colmenar Manzanero
Estudiante en Universidad Politécnica de Madrid
Mechanical or Industrial Engineering
Education
Universidad Politécnica de Madrid 2011 — 2016
Grado, Ingeniería Electrónica Industrial y Automática
Carlos Colmenarejo Martínez
Ingeniero de Edificación en CGD Arquitectura
Architecture & Planning
Education
IES Marqués de Santillana
Universidad Nacional de Educación a Distancia - U.N.E.D. 2013 — 2015
Máster en Ingeniería de las Estructuras de Edificación, Ingeniería estructural
Universidad Europea 2014 — 2014
Grado en Ingeniería de Edificación, Ingeniería de edificación
Universidad Politécnica de Madrid 2007 — 2013
Arquitectura Técnica, Edificación
Experience
CGD Arquitectura July 2012 - Present
Decathlon Internacional November 2011 - May 2012
Adecco November 2009 - November 2009
Skills
SketchUp, Timber Structures, Building Engineering, Microsoft Office, Structural Engineering, Steel Structures, Project Planning, Structural Analysis, Presto, Foundation Design, Concrete Structures, CE3X, Revit, MS Project, AutoCAD
Carlos Contreras Lora
Project Engineer en IBERDROLA Ingeniería y Construcción
Mechanical or Industrial Engineering
Education
Universidad de Zaragoza 2013 — 2015
MSc Rotating Machinery
Universidad Politécnica de Madrid 2006 — 2007
Master in Electric Power Generation Technologies, Electromechanical Technology/Electromechanical Engineering Technology
Universidad Politécnica de Madrid 1996 — 2005
MSc Marine Engineer, Electrical Machines & Turbines
Experience
IBERDROLA Ingeniería y Construcción September 2008 - Present
ABB (Asea Brown Boveri) July 2007 - September 2008
SENER July 2004 - October 2006
Skills
Estrategia empresarial, Nuclear Engineering, Gestión de proyectos, Ingeniería, Power Generation, Ingeniería eléctrica, Gestión de contratos, Microsoft Project, Ingeniería,..., Electrical Engineering, Energía nuclear, Commissioning, Gestión de la ingeniería, Power Plants, Puesta en marcha, Electric Motors, Project Engineering, Energía, Engineering, Engineering Management, Ingeniería de proyectos, Generación de energía..., Plantas eléctricas, Planeamiento de...
Carlos Correa Guinea, Ph.D.
Mechanical Engineer at UPM
Higher Education
Education
Universidad Politécnica de Madrid 2011 — 2014
Doctorado - Doctor of Philosophy (Ph.D.), Cum Laude
Universidad Politécnica de Madrid 2010 — 2011
Máster Universitario en Tecnología Láser - Master in Laser Technology
Universidad Politécnica de Madrid 2003 — 2009
Ingeniería Industrial - Industrial Engineering
Experience
Universidad Politécnica de Madrid January 2010 - Present
Skills
FEM analysis, AutoCAD, Laser Physics, Electrical Engineering, LSP, Nastran/Patran, Maxwell, Stress Analysis, Fortran, Mechanical Engineering, Plasma Physics, Abaqus, Matlab, OriginLab, Adams, Simulaciones
Carlos Correal
Solutions Architect at Dell
Information Technology and Services
Education
Oracle 2013 — 2013
SQL Fundamentals Certified, Database, Associate Oracle 11g DBA
Oracle 2011 — 2012
J2EE Certified Architect, Computer Software Engineering, Software Architect
SUN Microsystems 2009 — 2010
Sun Certified J2EE 5 Web Component Developer
SUN Microsystems 2008 — 2009
SUN Microsystems Java Certified Programmer, Java Certified Programmer
Universidad Politécnica de Madrid 2006 — 2007
MBA Master
Universidad Politécnica de Madrid 1999 — 2004
Telecom Engineer
Experience
Dell 2009 - Present
Celtiberia Software Limited March 2014 - Present
AIB 2013 - 2015
AIB 2013 - 2015
Perot Systems September 2007 - October 2009
Proyecta August 2007 - September 2007
GMV Aerospace and Defence August 2006 - August 2007
Indra March 2006 - August 2006
Ventura24 February 2005 - March 2006
Skills
Java, Ant, Java Enterprise Edition, Scrum, UML, Linux, Management, Hibernate, Solution Architecture, Spring Framework, Software Engineering, MySQL, Agile Methodologies, JavaScript, Web Services, Tomcat, Software Development, XML, Spring, Eclipse
Carlos Correas Lauffer
Socio en LAUFFERIZA arquitectos
Construction
Education
Universidad Politécnica de Madrid 2008 — 2009
Master en Dirección Integrada de Proyectos (Project Management)
Universidad Politécnica de Madrid 1992 — 2002
Arquitecto, Edificación
Experience
LAUFFER-IZA arquitectos August 2009 - Present
MiCertificadoEnergético.com March 2013 - Present
Bovis Lend Lease October 2011 - October 2012
ARBECO September 2010 - March 2011
NOZAR S.A. June 2005 - August 2009
TINSA March 2003 - June 2005
Glas Consulting February 2000 - May 2005
Skills
Coordinación de..., Espíritu empresarial, Gestión de proyectos, Domótica, Inversión inmobiliaria, AutoCAD, Construction Management, Liderazgo de equipos..., Gestión de riesgos, Inglés, Gestión de obras de..., Estrategia empresarial, Construction, Dirección técnica, Transacciones..., MS Project, Gestión de patrimonio, Dirección y desarrollo..., Eficiencia energética y..., Microsoft Office, Seguridad en obras de..., Tasación patrimonial, Diseño arquitectónico
Carlos Cortejoso Rodriguez
Ingeniero de Sistemas Senior at Atos Origin
Management Consulting
Education
Universidad Politécnica de Madrid 2011 — 2012
Máster, Seguridad Informática
Experience
Atos Origin June 1998 - Present
Gas Natural Fenosa 2001 - 2013
Adenet System June 1997 - June 1998
Nemo Internet April 1996 - June 1997
Skills
SQL, Computación en la nube, Cloud Computing, Administración de las..., Business Analysis, IT Management, Pre-sales, Gestión de proyectos, Information Security..., Estrategia TI, Gestión de proyectos de..., UML, Dirección y desarrollo..., Windows Server, Project Management, ITIL, IT Service Management, Network Security, IT Strategy, Oracle, Software Project..., Seguridad, Unix, Security, Information Security, Gestión de servicios TI, Linux, Biblioteca de...
Carlos Cortés Lahuerta
Ingeniero en Esteyco Energía
Civil Engineering
Education
Universidad Politécnica de Madrid 2001 — 2008
Ingeniero de Caminos, Canales y Puertos - Civil Engineer, Especialidad de Cimientos y Estructuras - Structures Area
Experience
Esteyco Energía March 2012 - Present
GMSLLP June 2010 - December 2011
Iberinsa (Acciona) October 2008 - May 2010
Skills
AutoCAD, SAP2000, Project Engineering, Construction, Steel Structures, Finite Element Analysis, STAAD, Structural Engineering, Ingeniería civil, Civil Engineering, Concrete
Carlos Cosín Canónico
Owner Grupo Digital
Information Technology and Services
Education
Universidad Politécnica de Madrid
Electrónica & Automática
Experience
GRUPO DIGITAL January 1996 - Present
Ingeniería de Seguridad Operaciones y Consultoria January 2012 - Present
DIGITAL SOFTWARE & SOLUTIONS S.L. January 2000 - Present
ALL TRADING BROKERS January 2003 - February 2013
Skills
Entrepreneurship, Business Development, Mobile Devices, Requirements Analysis, Business Planning, SaaS, E-commerce, Management Consulting, Start-ups, Web 2.0, Strategy, Business Strategy, SEO, New Business Development, Cloud Computing
Carlos Couce Armada
Telecommunications Engineer at Indra
Telecommunications
Education
Universidad Politécnica de Madrid 2005 — 2013
Ingeniero de Telecomunicaciones, Comunicaciones y Gestión de la Tecnología
Experience
Indra January 2015 - Present
Indra September 2014 - December 2014
El Laurel September 2010 - June 2012
C.M.U Jorge Juan September 2008 - June 2011
Carlos Couros
Marketing Telefonica Canarias
Telecommunications
Education
Universidad Politécnica de Madrid 1980 — 1987
Igeniero superior de Telecomunicación
Universidad Politécnica de Madrid
Universidad de Las Palmas de Gran Canaria
Experience
Telefonica 1991 - Present
Universidad de Las Palmas de Gran Canaria September 1992 - September 2012
Instituto astrofísico de canarias 1987 - 1991
Skills
Marketing de productos, Telecomunicaciones, Estrategia empresarial, Mercadotecnia
Carlos Crespo
Robotics Engineer en ESA/ESTEC
Telecommunications
Education
Universidad Politécnica de Madrid 2008 — 2013
Ingeniería de telecomunicaciones, Telecommunications Engineering
Experience
ESA/ESTEC September 2014 - September 2015
BQ May 2014 - August 2014
ESA/ESTEC October 2013 - May 2014
GSI (Grupo de Sistemas Inteligentes) (DIT - ETSIT - UPM) October 2011 - September 2013
Skills
Web Design, Apple Motion, OpenGL, Robotics, JavaScript, C++, I+D, Node.js, Android, Photoshop, Git, jQuery, RDF, Computer Vision, iOS, Matlab, SPARQL, Ingeniería de software, Software Engineering, Java, LaTeX, Electronics, Robótica
Carlos Crespo Pérez
Consejero Técnico at Ministerio de la Presidencia
Government Administration
Education
Ingeniería de Telecomunicación (UPM) - Derecho (UNED) - Historia y Arqueología (UCM)
Universidad Politécnica de Madrid 1989 — 1996
Engineer’s Degree, Radiocomunicaciones, comunicaciones móviles, antenas, fibra óptica, electrónica y equipos, Ingeniero de Telecomuncación
Universidad Nacional de Educación a Distancia - U.N.E.D. 2011 — 2015
Bachelor’s Degree, D. Civil; D. Procesal Civil; D. Internacional Público y Privado; D. Mercantil; D. de TIC; D. Romano, Grado en Derecho
Universidad Complutense de Madrid 2003 — 2008
Master’s Degree, Prehistoria - H. Antigua - Arqueología - H. Medieval - Ciencias y Técnicas Historiográficas, Licenciado en Historia
Universidad Complutense de Madrid 2008 — 2010
Master’s Degree, Arqueología, Master en Arqueología - 120 crds - 2 años
Universidad Complutense de Madrid 2010 — 2016
Doctor of Philosophy (Ph.D.), Iconografía del Mundo Clásico, Doctor en Historia
Ministerio de Administraciones Públicas 2005 — 2006
Cuerpo Superior de Sistemas y Tecnologías de la Administración de la Seguridad Social
CEF Centro de Estudios Financieros 2005 — 2006
Experience
Ministerio de la Presidencia January 2010 - Present
Ministerio de la Presidencia August 2007 - January 2010
Gerencia de Informática de Seguridad Social June 2006 - August 2007
ISDEFE January 2005 - June 2006
Orange April 2000 - January 2005
BT January 1999 - April 2000
Telefónica January 1998 - January 1999
Norsistemas - Grupo UNIÓN FENOSA January 1997 - January 1998
European Space Agency September 1996 - January 1997
SERVICIOS GENERALES DE TELEDIFUSIÓN S.A.- Universidad Politécnica de Madrid January 1996 - September 1996
Carlos Criado Perez
Architect en JCS Arquitectos
Architecture & Planning
Education
Universidad Alfonso X El Sabio 2006 — 2013
Arquitecto, Arquitectura
Budapesti Mûszaki és Gazdaságtudományi Egyetem 2009 — 2010
Bachelor of Architecture (BArch), Arquitectura
Woodbury University 2008 — 2008
Taller/Seminario de Arquitectura “aLA”, Arquitectura Sostenible
Universidad Politécnica de Madrid 2013 — 2014
Miembro de la Cátedra Gonzalo de Cárdenas., Arquitectura
Universitat Politècnica de València (UPV) 2012 — 2012
RESTAPIA 2012, Arquitectura
Universidad Politécnica de Madrid 2011 — 2011
III Jornadas del CAH 20thC, Arquitectura
"Ion Mincu" University of Architecture and Urbanism 2012 — 2012
Taller Italo-Hispano-Rumano de Restauración Arquitectónica, Título en Restauración Arquitectónica
Universidad de Sevilla 2012 — 2012
FICAL. Forum Ibérico de la Cal, Arquitectura
CIAT 2012 — 2012
I Curso Taller de Arquitectura Sostenible, Arquitectura
CIAT 2011 — 2011
Curso de Restauración del Patrimonio Arquitectónico, Curso de Restauración del Patrimonio Arquitectónico
Experience
JCS Arquitectos April 2014 - Present
Kschool October 2013 - August 2014
Estudio Guevara S.L. July 2011 - May 2013
RECONCAR S.L (Cartagena, Murcia) June 2010 - September 2010
Prácticas empresa, GyP Arquitectos, S.L. (Salamanca) June 2009 - September 2009
Mediciones y Presupuesto, RAMER Proyectos y Promociones S.L. ( Cartagena, Murcia) June 2008 - September 2008
Gruas Criado S.L June 2006 - September 2006
Gruas Criado S.L. June 2005 - September 2005
Gruas Criado S.L June 2004 - September 2004
Carlos Cristóbal
Director de Operaciones en MYC Aeronautica
Airlines/Aviation
Education
Universidad Politécnica de Madrid
Master of Business Administration (MBA)
Universidad Politécnica de Madrid
INGENIERO INDUSTRIAL
Experience
MYC Aeronautica January 2010 - Present
Grupo TAM October 2004 - December 2009
Grupo TAM September 2003 - September 2004
Indra August 2001 - November 2002
Skills
Planeamiento de..., Negociación, Estrategia empresarial, Mejora continua, Liderazgo de equipos, Aeronáutica, Dirección y desarrollo..., Administración y...
Carlos Cuadrado
Energy Engineer
Oil & Energy
Education
Newcastle University 2015 — 2017
Master of Science (MSc), Environmental Engineering Technology/Environmental Technology
EUDE Business School 2011 — 2012
Postgraduate Certificate, Renewable Energy and Environment, Diploma
Universidad Politécnica de Madrid 2005 — 2011
Mining Engineer, Energy and Fuels, Master and Bachelor's of Engineering Combined (5 years)
Experience
Inditex December 2013 - Present
Hulme Community Garden Centre May 2014 - August 2014
Action for Sustainable Living April 2014 - May 2014
Indra July 2012 - July 2013
CNMC (Comisión Nacional de los Mercados y la Competencia) March 2010 - February 2011
Skills
Team Management, Teamwork, Wind, Matlab, Project Planning, Environmental Impact..., Reliability, Project Management, Engineering, Business Analysis, Energy, Project Engineering, Biomass, Team Leadership, AutoCAD, Solar Thermal, MS Project, SAP, Climate Change, Microsoft Office, Spanish, Photovoltaics, Renewable Energy, Business Strategy, Energy Efficiency
Carlos Cuadrado Barril
Account Executive en SUSE
Information Technology and Services
Education
Universidad Complutense de Madrid 2006 — 2013
Economía, mundial y desarrollo
Universidad Politécnica de Madrid 2004 — 2006
Ingeniería naval y oceánica, Arquitectura naval e Ingeniería marítima
IES Camilo José Cela. 2002 — 2004
Bachillerato, Bachillerato cientítfico- técnico, 7.5
Escualas pías de San Fernando. Escolapios Pozuleo 1993 — 2001
ESO, CIENCIAS
Experience
SUSE July 2015 - Present
Ravagnani Dental España September 2013 - September 2015
SUSE May 2013 - September 2013
The luxe (London) June 2012 - September 2012
Selma ontime SL y ANCA Servicios odontológicos SL. May 2010 - June 2012
CEMAS 2010 - 2011
Skills
Strategic Planning, Administración y..., Servicio de atención al..., Redes sociales, Análisis financiero, Liderazgo de equipos, English, Management, Social Media, Negotiation, Team Management, Estrategia empresarial, Teamwork, Teaching, Sales, Estrategia, SAP CRM, Spanish, Customer Service, Dirección y desarrollo..., Trabajo en equipo, Marketing Strategy, Microsoft Office, Inglés, Financial Analysis, Event Planning, Estrategia de..., Business Strategy, Personnel Management, Eviews, Business Planning, Español, Startup Development, Matlab, Team Leadership, Ventas, Strategy, Plan de negocio, Negociación, Planificación...
Carlos Cuadros Viosquez
Responsable Comercial Energía Eólica y Fotovoltaica en OHL Industrial
Renewables & Environment
Education
Universidad Politécnica de Madrid 1990 — 1997
Ingeniero de Minas, Energía y Combustibles
Experience
OHL Industrial March 2015 - Present
Corporación Llorente October 2008 - March 2015
Capital Energy 2007 - 2008
Ibedrola Ingeniería y Construcción 1999 - 2007
Carlos Cubillo Rubiato
Project Manager Professional PMP®
Civil Engineering
Education
Universidad Politécnica de Madrid 1991 — 1998
MEng Civil Engineering, Railroad and Railway Transportation
ESIC: Business & Marketing School 2009 — 2011
Programa Superior de Gestión Empresarial, Business Administration and Management, General
Experience
INECO January 2013 - Present
INECO January 1998 - Present
INECO-TIFSA January 2012 - January 2013
INECO-TIFSA 2007 - 2012
INECO-TIFSA January 2004 - January 2007
INECO-TIFSA January 1999 - January 2004
Skills
Construction, Railway, Rail, GIS, Project Management, Transportation Planning, AutoCAD, Public Transport, Project Planning, Construction Management, MS Project, Road, Transportation, Civil Engineering, Engineering, ArcGIS, Microsoft Project
Carlos Cuesta Catalán
Gerente Logística Promocional
Logistics and Supply Chain
Education
Universidad Politécnica de Madrid
Experience
En busca de nuevos proyectos June 2015 - Present
Stock Uno Grupo de Servicios November 2011 - June 2015
UNBOX 2008 - 2012
Dispatching, S.A. September 2006 - September 2008
Skills
Español, Transporte, Key Account Management, Microsoft Excel, Transportation, Negotiation, Estrategia empresarial, Dirección y desarrollo..., Compras, Purchasing, Team Management, Strategic Planning, Logística, Spanish, Gestión de transportes, Planificación..., Microsoft PowerPoint, Microsoft Word, Air Freight, Negociación, Transportation..., PowerPoint, Microsoft Office, Liderazgo de equipos, Logistics
Carlos Cueto Mondéjar
Estudiante en Universidad Politécnica de Madrid
Mechanical or Industrial Engineering
Education
Universidad Politécnica de Madrid 2010 — 2014
Carlos Cumplido Rosa
Consultor becario en Altran España
Renewables & Environment
Education
Universidad Politécnica de Madrid 2009 — 2015
Ingeniería Aeronáutica, esp. sistemas de propulsión
Experience
Altran España August 2015 - Present
Skills
Matlab, Catia V5, Fortran 95, Ingeniería, Windows, Microsoft Office
Carlos D. Monedero
Creative, Architect & Visual Merchandiser
Architecture & Planning
Education
Universidad Politécnica de Madrid 2008 — 2014
Arquitecto superior
Universidad Nacional de Educación a Distancia - U.N.E.D. 2010 — 2016
Grado en Sociología
Colegio Chamberí 2006 — 2008
Bachillerato
Experience
Loewe May 2014 - January 2015
Universidad Politécnica de Madrid February 2014 - January 2015
EXPO 2015 S.P.A. September 2012 - November 2012
Louis Vuitton October 2011 - July 2012
Universidad Politécnica de Madrid June 2011 - August 2011
Skills
AutoCAD Architecture, Maple, Diseño gráfico, Microsoft Office, Interior design, Lightroom, SketchUp, Gestión de proyectos, After Effects, AutoCAD, Diseño interior, Carrier HAP, Comercialización visual, Microsoft Excel, Photoshop, Rhinoceros, InDesign, Arquitectura, Inglés, Visual merchandising, Retail design, Diseño minorista, Diseño arquitectónico, Matlab, Illustrator
Carlos Dader
Enterprise Technical Operations at Orange
Telecommunications
Education
Universidad Politécnica de Madrid
Ingeniero Superior de Telecomunicaciones
Experience
Orange July 2010 - Present
France Telecom 2008 - 2009
Ya.com November 2005 - July 2007
Carlos Damas
Estudiante en Universidad Politécnica de Madrid
Mechanical or Industrial Engineering
Education
Universidad Politécnica de Madrid 2010 — 2015
Grado en ingeniería Industrial especialidad Electricidad
Experience
ELECNOR May 2015 - Present
Skills
Microsoft PowerPoint, Power Electronics Design, Microsoft Word, Industrial Organization, Servicio de atención al..., Ingeniería eléctrica, Electric Motors, Microsoft Excel, MathCAD, Teamwork, Electrical Industry, Renewable Energy, AutoCAD, Microsoft Office, Electrical Engineering
Carlos Daniel Martín Martínez
'Lead Engineer' en Emerson Process Management
Mechanical or Industrial Engineering
Education
Universidad Politécnica de Madrid 1999 — 2005
Ingeniero técnico industrial, Ingeniería eléctrica y electrónica
Experience
Emerson Process Management October 2010 - Present
Emerson Process Management June 2007 - October 2010
Skills
Commissioning, ANSYS, Control Systems Design, Process Automation, Solidworks, SCADA, Project Engineering, Instrumentation, Automation, Process Control, Mechanical Engineering, Pro Engineer, DCS, PLC
Carlos Daniel del Valle Prada
Analista en everis
Information Technology and Services
Education
Universidad Politécnica de Madrid 1999 — 2004
Ingeniero Técnico, Informática de Sistemas
Experience
everis September 2004 - Present
Consejería de Educación - Comunidad de Madrid October 2003 - March 2004
Skills
Java EE, JavaScript, PL/SQL, Java, Gestión de proyectos, Desarrollo de software, Oracle, SQL, Liderazgo de equipos, Gestión de proyectos de..., XML, Dirección y desarrollo...
Carlos Dapena
Ingeniero de Caminos en Dragados SA
Construction
Education
Ludwig-Maximilians Universität München 2014 — 2014
Competitve Strategy
Universidad Politécnica de Madrid 2014 — 2014
Innovación y Futuro para la Dirección Estratégica, Dirección Estratégica
Escuela de Negocios 2012 — 2013
Master of Business Administration (MBA), Business Administration and Management, Executive
HighDevelop Business School 2012 — 2012
Coaching, Gestión de recursos humanos/Administración de personal, general
Universidad de A Coruna 1999 — 2007
Ingeniero de Camino Canales y Puertos
Experience
Dragados SA January 2015 - Present
Dragados SA March 2013 - January 2015
Dragados SA January 2012 - March 2013
Dragados SA August 2011 - January 2012
Dragados SA December 2009 - January 2012
Dragados SA August 2007 - December 2009
Skills
Spanish, Strategic Planning, Business Strategy, Energy, Civil Engineering, Construction Management, AutoCAD, English, Microsoft Excel, Construction, MS Project, Microsoft Office
Carlos David Cilleros Hernandez
Arquitecto Técnico
Architecture & Planning
Education
Universidad Camilo José Cela 2011 — 2012
Ingeniero de la Edificación
Universidad Politécnica de Madrid 2006 — 2011
Arquitecto Técnico
Experience
Diseños y proyectos interce, sl September 2013 - Present
Ferrovial February 2011 - June 2011
El país de las maravillas November 2010 - December 2010
Didacticaventura December 2007 - January 2008
Skills
Presto, Curso patología..., AutoCAD, Certificación..., Auditorias energeticas, Microsoft Project, Tramitacion de licencias
Carlos David Menor Sánchez
ThermoMechanical Analysis Engineer at LIDAX
Aviation & Aerospace
Education
Universidad Politécnica de Madrid 2005 — 2009
Bachelor's degree, Technical Aeronautical Engineering, sp. in Aircrafts
Universidad de León 2012 — 2014
Engineer's degree, Aerospace, Aeronautical and Astronautical/Space Engineering
Universidad de Alcalá 2010 — 2011
Master's degree, Space Science and Technology
Universidad San Pablo-CEU 2014 — 2015
Master's degree, Renewable Energies
Experience
LIDAX June 2013 - Present
ASTRON ENGINEERING SOLUTIONS January 2013 - June 2013
Instituto Nacional de Tecnica Aeroespacial (INTA) April 2011 - December 2012
Instituto Nacional de Tecnica Aeroespacial (INTA) February 2011 - March 2011
Spanish Air Force August 2009 - August 2009
Skills
Aerospace Engineering, ESATAN, Mechanical Engineering, Aerospace, Catia, Matlab, Composites, Team-oriented, MSC Patran, Finite Element Analysis, Engineering, Aeronautics, FEMAP, Aerospace Structures, Nastran, Microsoft Excel, Patran, CATIA
Carlos De Blas Chies
Solucionar problemas – Hacer que todo funcione... .... un hecho en Castilla la Mancha Televisión
Broadcast Media
Education
Universidad Politécnica de Madrid
Experience
Castilla La Mancha Television October 2011 - Present
Castilla la Mancha Televisión November 2001 - October 2011
RTVE CORPORACIÓN June 1987 - November 2001
Telson December 1986 - June 1987
Carlos De Las Heras Peña
New Business developer en Jot Internet Media
Airlines/Aviation
Education
Universidad Politécnica de Madrid 2009 — 2013
Ingeniero Técnico Aeronáutico, Equipos y Materiales Aeroespaciales
Google Academy 2014 — 2014
Adwords: Certificación oficial de conceptos básicos y avanzados - Search y Display, Gestor publicitario. Plataforma Adwords., 9
Katholieke Hogeschool Brugge - Oostende: KHBO 2012 — 2013
Erasmus Student dealing with my Final Project, Design of an UAV catapult
Experience
Jot Internet Media March 2015 - Present
Jot Internet Media July 2014 - February 2015
International House Madrid May 2013 - December 2014
Jot Internet Media April 2014 - June 2014
Gaudí3D February 2013 - March 2014
Varios January 2010 - November 2013
Skills
Análisis de datos, Catia, Repetier, Google Adwords, Slic3r, Microsoft Excel, Microsoft Office, Skeinforge, PhabSim, Cura, River 2D, Pronterface, Visual Basic (básico), Camtasia, Microsoft Excel avanzado
Carlos De Osa Manzanares
Jefe de Producción en EADS CASA
Airlines/Aviation
Education
Universidad Politécnica de Madrid 1990 — 1996
Ingeniero Tecnico Industrial, Ingeniería Tecnica Industrial
Carlos De Pedro
IMS / IN / NGIN Service Solution Engineer at Vodafone as Altran Consultant
Telecommunications
Education
Universidad Politécnica de Madrid 1999 — 2004
Ingenerio Técnico de Telecomunicación, Telemática
Cisco 2012 — 2012
Certificación Cisco, CCNP - TSHOOT
Universitat Oberta de Catalunya 2007 — 2009
Licenciatura de Investigación y Técnicas de Mercado, Marketing
Experience
Vodafone August 2011 - Present
Ericsson October 2010 - February 2012
France Telecom March 2009 - October 2010
Motorola April 2007 - March 2009
Vodafone May 2005 - April 2007
Skills
SIP, Integration, Telecommunications, Cisco Technologies, GSM, UMTS, IP, VoIP
Carlos Del Pozo
Software Architect at Iecisa
Computer Software
Education
Universidad Politécnica de Madrid 1995 — 2000
Colegio Ramón y Cajal
Experience
IECISA April 2011 - Present
IECISA February 2006 - April 2011
Skills
Programming, Software Engineering, TFS, Web Services, Windows, SQL Server, ASP.NET, Microsoft Technologies, Analysis, WPF, SQL, XML, UML, Entity Framework, C#, .NET, HTML, LINQ
Carlos Delgado Roy
Civil Engineer
Civil Engineering
Education
Universidad Politécnica de Madrid 2014 — 2016
Máster en Ingeniería de Caminos, Canales y Puertos
Universidad de Zaragoza 2010 — 2014
Ingeniería Civil, Construcciones Civiles
Experience
CEMEX España Operaciones SLU July 2014 - August 2014
CEMEX España Operaciones SLU July 2013 - September 2013
Carlos Delgado del Río
Associate Director of Marketing en MONTROSE GLOBAL LLP
Airlines/Aviation
Education
Cranfield University 2013 — 2014
Master of Science (MSc), Air Transport Management
Universidad Politécnica de Madrid 2007 — 2013
Master of Engineering (MEng), Ingeniería aeroespacial, aeronáutica y astronáutica/Ingeniería espacial
Experience
MONTROSE GLOBAL LLP February 2015 - Present
DVB Bank SE May 2014 - February 2015
Cassidian July 2013 - September 2013
von Karman Institute for Fluid Dynamics July 2012 - September 2012
INECO-TIFSA November 2011 - April 2012
SENER May 2011 - October 2011
Skills
Consulting, Aviation Finance, Transportation..., Engineering, Aerospace Engineering, Aircraft Leasing, Management, Airline Management, Aerodynamics, Research
Carlos Dextre Fernandez
Estudiante en Universidad de Cantabria
Construction
Education
Universidad de Cantabria 2011 — 2014
Caminos Canales y Puertos
Universidad Politécnica de Madrid 2007 — 2011
Obras Públicas, Hidrología
Skills
English, Matlab, Microsoft Excel, AutoCAD, Microsoft Word, PowerPoint, Project Planning, Construction, Spanish, Engineering, MS Project, Civil Engineering, Microsoft Office, Construction Management, Contract Negotiation
Carlos Diaz Conde
Sales & Partnership Director at T&BS
Information Technology and Services
Education
HEC Paris 2001 — 2003
Master's Degree, Executive Master Program
Universidad Politécnica de Madrid 1992 — 1998
Engineer's Degree, Computer Science
Experience
Transformation and Business Success September 2014 - Present
Amdocs April 2012 - August 2014
Ericsson February 2010 - March 2012
Pride Group July 2005 - February 2010
Steria Group Spain 2004 - 2005
Steria Group France January 2002 - June 2004
Steria Group Spain January 2001 - December 2001
Steria Group France October 1999 - December 2000
Skills
Team Management, Pre-sales, Integrated Marketing..., Big Data, Business Strategy, Business Transformation, Customer Experience, Mobile Devices, Start-ups, Leadership, Strategic Consulting, Analytics, IOT, Business Development, Telecommunications, Telco, Enterprise Software, CRM, IT Transformation, Integration, IT Strategy, Strategic Visionary, Management
Carlos Diaz Ron
Estudiante de Universidad Politécnica de Madrid
Education
Universidad Camilo José Cela 2011 — 2012
Ingeniero De La Edificación
Universidad Politécnica de Madrid 2005 — 2010
Arquitectura Técnica
I.E.S: Islas Filipinas 2003 — 2005
Ciclo formativo superior "Desarrollo y aplicación de proyectos de construcción
Skills
AutoCAD
Carlos Diez Sanchez
Analista Programador en Tragsatec
Program Development
Education
Universidad Politécnica de Madrid 1988 — 1996
Ingeniería Técnica Agrícola
Experience
Tragsatec April 2014 - Present
Balanku Asesores S.A. November 2002 - February 2014
Thales Information Systems June 2002 - November 2002
Open Solutions June 2001 - June 2002
Skills
.NET, CSS, SQL, Single Pages..., Modelo-Vista-Controlador, Silverlight, Open xml, WCF, XML, WPF, XSLT, PRINCE2, Servicios web, Desarrollo de software, C#, jQuery, Entity Framework, Visual Studio, ASP.NET MVC, ASP.NET, VB.NET, Microsoft SQL Server, T-SQL, HTML5, JavaScript, Software Development
Carlos Doblas Alvarez
INGENIERO DE CAMINOS na ISOLUX CORSAN
Construction
Education