Politecnico di Torino, Torino
The Politecnico di Torino is one of the most important universities in Europe for engineering and architecture studies, strongly committed to collaboration with industry. Politecnico is a research university that participates at the highest levels of international scientific research. Research activities, are structured in four macro-areas: Industrial Engineering; Information Technology; Management and Mathematical Engineering; Civil, Environmental, Architecture and Design Engineering.
The new campus hosts the Business Research Center that provides partners with office space and laboratories for innovation and technology transfer.
The new campus hosts the Business Research Center that provides partners with office space and laboratories for innovation and technology transfer.
Politecnico di Torino Alumni
Marcello Ambrosio
Libero professionista agronomo paesaggista
Renewables & Environment
Education
Politecnico di Torino 2001 — 2007
Experience
Studio Ambrosio 2007 - Present
Skills
Energy, Sostenibilità, Sustainability, Waste, Biofuels, Renewable Energy, Energie rinnovabili, Biomass, Waste to Energy, Energy Efficiency, Anaerobic Digestion, Biogas, Alternative Energy, Cogeneration, Waste Management, Solar Energy, Bioenergy
Marcello Bobba
Senior Unified Communications Solution Engineer at ITALTEL S.p.A.
Information Technology and Services
Education
Politecnico di Torino
Experience
ITALTEL S.p.A. January 2008 - Present
Italtel November 2012 - July 2014
PRES s.r.l. September 1998 - January 2008
Skills
MPLS, SIP, Unified Communications, Network Design, Cisco IOS, Network Architecture, QoS, H.323, VoIP, Networking, Cisco Telepresence and..., Telepresence, Cisco Call Manager, IP, Routing, Switches, Cisco Technologies, CCNP
Marcello Buonocore
Defense & Space
Education
Politecnico di Torino 2010 — 2010
Università degli Studi di Napoli 'Federico II' 1993 — 2002
Aerospace Engineer Master’s degree - Mark: 110/110 cum LAUDE
Experience
THALES ALENIA SPACE March 2014 - Present
THALES ALENIA SPACE May 2012 - Present
THALES ALENIA SPACE March 2011 - Present
THALES ALENIA SPACE December 2012 - February 2014
THALES ALENIA SPACE May 2012 - March 2013
THALES ALENIA SPACE March 2011 - May 2012
THALES ALENIA SPACE March 2011 - May 2012
THALES ALENIA SPACE March 2010 - March 2012
Thales Alenia Space - Torino March 2008 - February 2012
THALES ALENIA SPACE - Torino March 2010 - July 2011
Skills
Dynamics, Sensors, Project Management, Spacecraft, Proposal Writing, Labview, Research Project..., Systems Design, EDL, Robotics, Control Systems Design, Matlab, Simulation, Accelerometers, Simulink, Engineering, International Project..., Actuators, Control System Design, Space Systems, Avionics, Model Design, R&D, Signal Processing, Software Engineering, Testing, Simulations, System Design, Systems Engineering, Entry Guidance, Aerospace Engineering, CMOS, Embedded Systems, Aerospace, Program Management, Management, Satellite, Orbital Mechanics
Marcello Burzi
Amministratore Unico presso Cube srl
Computer Hardware
Education
Politecnico di Torino 1975 — 1980
ing, Elettronica
Experience
Dinamika spa January 2010 - Present
Cube srl January 2003 - Present
Dinamika sas January 1984 - December 2009
Marcello Cappelletti
Logistics and Customer Care Manager at Italia Zuccheri Commerciale
Food Production
Education
Politecnico di Torino 1990 — 1994
BSc, Industrial Engineering Degree
University of Brighton 1990 — 1994
BSc (Hons), European Business with Technology
Politecnico di Torino
Diploma
Experience
Italia Zuccheri Commerciale January 2007 - Present
Del Monte Italia September 1999 - December 2006
UDV (Diageo) June 1996 - September 1999
Skills
Continuous Improvement, Marketing Strategy, FMCG, Product Development, International Trade, 3PL, Production Planning, Cross-functional Team..., Forecasting, Supply Chain..., Procurement, SAP, Supply Chain Management, Demand Planning, Supply Management, Purchasing, Logistics, Business Strategy, Change Management, Negotiation, Warehousing, Business Planning, Strategy, Leadership, Supply Chain
Marcello Carboni
Mediterranean District Manager presso Regenesis Ltd.
Environmental Services
Education
2001 — 2001
Collaboration in EU financed Project
Politecnico di Torino 1995 — 2001
Ingegnere per l'Ambiente e il Territorio, Ingegneria
1998 — 1999
Erasmus Project
Liceo Classico Massimo D'Azeglio 1990 — 1995
Experience
Regenesis September 2011 - Present
TRS Servizi Ambiente s.r.l. August 2010 - September 2011
TRS Servizi Ambiente s.r.l. September 2006 - August 2010
TRS Servizi Ambiente s.r.l. 2005 - September 2006
TRS Servizi Ambiente s.r.l. 2003 - 2005
TRS Servizi Ambiente s.r.l. November 2001 - 2003
Skills
Acqua, Acque di falda, Risanamento delle acque..., Ingegneria ambientale, Bonifica
Marcello Chessari
Plastics
Education
Politecnico di Torino 1981 — 1987
Laurea in Ingegneria, Ingegneria meccanica, 96/110
Marcello Cioffi
Ingegnere
Civil Engineering
Education
Politecnico di Torino 1970 — 1976
Laurea ingegneria civile
Experience
Diocesi Cerignola - Ascoli Satriano October 2014 - Present
Azienda agricola Cavallo Francesco January 2013 - December 2014
Skills
Ingegneria, Microsoft Office, Project planning, CAD, Microsoft Excel
Marcello Dell'aquila
Technical Manager (Oracle)
Information Technology and Services
Education
Politecnico di Torino
Ingegneria Informatica, Ingegneria informatica
Experience
Oracle 2006 - Present
Leaseplan Italia 2011 - 2014
Leaseplan Italia 2011 - 2014
LeasePlan Ireland 2011 - 2014
LeasePlan Italy 2011 - 2014
Vodafone Italy 2013 - 2013
EFSA 2006 - 2012
BEA Systems 2006 - 2009
Skills
Pre-sales, JSP, Tomcat, Oracle SOA Suite, Weblogic, Architettura delle..., Portals, Oracle Fusion Middleware, Java Enterprise Edition, Enterprise Architecture, XML, Solution Architecture, Oracle, Enterprise architecture, Cloud Computing, PL/SQL, Java, SOA, Integration, JBoss Application Server, Web Services, Middleware
Marcello Dell'aquila
at Oracle
Computer Software
Education
Politecnico di Torino 1997 — 2003
Experience
Oracle Italy 2009 - Present
Oracle December 2008 - Present
EFSA 2006 - 2010
BEA Systems December 2006 - December 2008
European Food Safety Authority 2006 - 2008
Cap evolutive November 2005 - November 2006
Marcello Di Gregorio
Managing Director presso HARTING
Electrical/Electronic Manufacturing
Education
Politecnico di Torino 1974 — 1980
Laurea, Ingegneria Elettronica
Experience
HARTING October 2007 - Present
Rockwell Automation April 2003 - September 2007
Rockwell Automation January 1999 - March 2003
Rockwell Automation May 1994 - December 1998
Rockwell Automation April 1989 - April 1994
Sesam Spa January 1987 - March 1989
Sysdata Spa May 1983 - December 1986
Marconi Italiana Spa October 1980 - May 1982
Skills
Business development, Product Management, Key Account Management, Ingegneria, Gestione vendite, Gestione key account, Business Strategy, International Sales, New business development, Business plan, Product Marketing, Vendite internazionali, SCADA, Trattative, Strategia d'impresa, Management, New Business Development, Sales Management, Manifattura, Marketing di prodotto, Electronics, PLC, Gestione prodotti, Automazione dei processi, Automazione, Sviluppo di prodotto, Elettronica
Marcello Gentile
Aerodynamicist at Dallara Engineering
Automotive
Education
Politecnico di Torino 2010 — 2012
Laurea Specialistica, Ingegneria Aerospaziale e Astronautica - orientamento: Aerodinamica
Politecnico di Torino 2006 — 2010
Laurea Triennale, Ingegneria Aerospaziale
I.T.I.S. "E. Majorana" - Termoli 2001 — 2006
Diploma, Liceo Scientifico Tecnologico
Experience
Dallara December 2012 - Present
Ferrari October 2012 - November 2012
Automobili Lamborghini S.p.A. January 2012 - September 2012
BlogF1.it 2011 - 2012
Squadracorse Politecnico di Torino 2010 - 2012
Skills
Fluid Dynamics, Visit, Star-CCM+, ANSA, DNS, Ingegneria..., Microsoft Office, Wind Tunnel Testing, Ensight, Unix, CFD, Hypersonic, RadTherm, Fluidodinamica, Monte Carlo Simulation, Matlab, Simulink, Fluidodinamica..., Industria..., SolidWorks, CATIA, Aerodynamics, Catia, Aerodinamica, Aerospace Engineering, Linux, Ingegneria, CAD, Veicoli, ANSYS, Wind Tunnel, OpenFOAM, Track testing
Marcello Lombardi
Constructor Manager Events; Fashion Show and special projects presso Prada
Architecture & Planning
Education
1994 — 2000
Laurea, Architettura
1998 — 2000
Tesi di Laurea, Architettura bioclimatica
Experience
Prada November 2012 - Present
Benetton January 2012 - October 2012
H&M August 2007 - January 2012
TOP Torino Olympic Park January 2006 - July 2007
TOROC November 2002 - July 2007
TOROC 2001 - 2007
Skills
Event Planning, Retail, Public Relations, Contract Negotiation, Team Management, Marketing Communications, Sales Management, Project Management, Event Management, Social Media Marketing, Italian, New Business Development, Project Planning, Microsoft Office, Negotiation
Marcello Modotti
Consultant and Temporary manager at Personal company
Automotive
Education
Politecnico di Torino 1987 — 1995
Master Graduated, Aeronatical engineering
liceo scientifico Gramsci ivrea
Experience
Marcello Modotti January 2013 - Present
Assystem 2008 - December 2012
Pininfarina 2007 - 2007
D'Appolonia 2005 - 2007
Italdesign Giugiaro 2001 - 2005
Arvin Exhaust System 1998 - 2000
Delphi Automotive 1995 - 1998
Skills
Sales Process, Business development, Mergers, Problem Solving, Forecasting, Budgets, Product Development, Business Planning, Business Development, Team Building, Key Account Management, Management Consulting, International Sales, Team Management, Strategy, Executive Management, Marketing, Sales Management, Consulting, Product Design, Strategic Planning, International Business, Marketing Strategy, Business Strategy, B2B, English, Negotiation, Sales Operations, Engineering, Change Management, Mergers & Acquisitions, Sales, Leadership, Program Management, Competitive Analysis, Pricing, Contract Negotiation, Project Management, Organizational..., Vehicles, Project Planning, Direct Sales, Manufacturing, Operations Management, Automotive, Product Marketing, New Business Development, Cross-functional Team..., Automobile, Management
Marcello Monticone
Libero professionista Ingegneria meccanica o industriale
Mechanical or Industrial Engineering
Education
Master ISVOR FIAT 1989 — 1990
Politecnico di Torino 1981 — 1989
Laurea, Ingegneria Meccanica
Experience
Monticone ing. Marcello March 1995 - Present
Studio Associato di Ingegneria Cavaciuti e Monticone January 1995 - May 2011
Fiat Auto S.p.A. October 1989 - February 1995
Skills
Formazione in materia..., Manufacturing, AutoCAD, Project Engineering, Engineering, Lean Manufacturing, Sicurezza nei luoghi di..., Mechanical Engineering, Progettazione...
Marcello Munari
Studente presso Politecnico di Torino
Education
Politecnico di Torino 2010 — 2016
Marcello Norcia
Esperto nel settore della scultura artistica e restauro di opere d'arte e sottoposte a vincolo
Architecture & Planning
Education
Politecnico di Torino
Laurea in Architettura
Istituto Statale d'Arte "G.Perugini" di Foggia 1980 — 1985
Diploma
Skills
Scultore, Architetto,...
Marcello Orrù
SAP BW Consultant presso SDG Consulting
Information Technology and Services
Education
2009 — 2012
2004 — 2009
Experience
SDG Consulting March 2014 - Present
University of Pisa 2009 - Present
B4C Consulting March 2013 - March 2014
Skills
Business Objects, SAP BI, C, SAP BW, Linux, Java, Microsoft Office, C++
Marcello Palumbo
Studente presso Politecnico di Torino
Nanotechnology
Education
Ecole polytechnique fédérale de Lausanne 2015 — 2017
Master, Nanotechnologies for ICTs
Grenoble INP - Phelma 2015 — 2017
Master, Nanotechnologies for ICTs
Politecnico di Torino 2015 — 2017
Master, Nanotechnologies for ICTs
Grenoble INP - Phelma 2015 — 2015
Summer School, Micro and Nanotechnology
Politecnico di Torino 2012 — 2015
Bachelor's degree, Physical Engineering
Liceo Scientifico Piero Gobetti, Torino 2007 — 2012
Piano Nazionale Informatica (PNI), 98/100
Experience
Politecnico di Torino March 2015 - June 2015
Skills
Lithography, Microsoft Office, Solar Cells, Mathematical Analysis, Electronics, OriginPro, Solid State Physics, Microsoft Excel, C, LaTeX, Matlab
Marcello Pappalardo
Dirigente d'azienda presso SAC SOCIETA' AEROPORTO CATANIA SPA
Airlines/Aviation
Education
Politecnico di Torino 1973 — 1978
Laurea in Ingegneria Civile
Experience
SAC - SOCIETA' AEROPORTO CATANIA SPA Direttore di cantiereA.I.A. Costruzioni spaNovember 1979 - May 1986
Skills
Management, Aeroporti, Microsoft Excel, Project planning, Pianificazione..., Aviazione
Marcello Pinna
Assicuratore
Professional Training & Coaching
Education
Politecnico di Torino 2008 — 2016
Laurea Specialistica in Architettura e dell'Ingegneria edile, Ingegneria Edile - Recupero Architettonico ed Urbanistico, in corso di complettamento
Politecnico di Torino 2002 — 2008
Laurea triennale in Scienze dell'Architettura e dell'Ingegneria edile, Storia e Conservazione dei Beni Architettonici ed Ambientali, 107/110
Experience
Disocupato March 2013 - Present
Scuole Private ed Enti di Formazione 2012 - 2014
Skills
Addetto alla conduzione..., Addetto alla conduzione..., Formazione, Photoshop, AutoCAD, Disegno tecnico, Gestione delle risorse..., Microsoft Excel, PowerPoint, Management, Leadership, Assistenza clienti, Project planning, Microsoft Office, Marketing, Microsoft Word, Progettazione...
Marcello Pirotti
Independent Consulting at Governament Agency(retired)
Government Administration
Education
Liceo Scientifico CAVOUR (Roma) 1957 — 1962
Scuola Media Superiore Luigi Settembrini (Roma) 1954 — 1957
Politecnico di Torino
Experience
Governament Administration September 2004 - Present
Ministry of Defence September 1962 - March 2001
Skills
National Security, Public Policy, International Relations, Policy, Defense, Emergency Management, Government, Program Management, Policy Analysis
Marcello Pocaterra
CIIA / condominioeasy
Internet
Education
UCD DUBLINO IRELAND 1997 — 2000
Informatica
Politecnico di Torino 1990 — 1994
Experience
CIIA SNC / condominioeasy September 2012 - Present
Skills
Key Account Management, Team Management, Business Strategy, Sales Operations, Sales, Gestione account, Microsoft Office, Microsoft Excel, Team leadership, Account Management, Strategia d'impresa, Management, Strategia di marketing, Product Management
Marcello Ponzo
Ingegnere Civile Strutturista Libero Professionista
Civil Engineering
Education
Politecnico di Torino 1997 — 2003
Laurea, Ingegneria Civile indirizzo Strutture
Experience
Libero Professionista July 2015 - Present
SB Setec S.p.A. February 2007 - June 2015
CO.GEN. S.r.l. January 2004 - September 2005
Skills
Project planning, Microsoft Excel, Matlab, AutoCAD, Ingegneria civile, Energia, Microsoft Word, PowerPoint, Edilizia, Project management, Commissioning, Gas, Ingegneria, Ingegneria dei progetti, Engineering, CAD, Microsoft Office, Analisi agli elementi..., Manifattura, Microsoft Windows
Marcello Prina
Titolare presso PrP Associati
Renewables & Environment
Education
Politecnico di Torino 1996 — 2002
Laurea, Elettrotecnica
Experience
PrP Associati January 2012 - Present
PrP Associati 2002 - 2011
Marcello Rosso
Senior Electrical Engineer
Mechanical or Industrial Engineering
Education
Politecnico di Torino 1988 — 1996
Laurea, Ingegneria Elettrica
Istituti Salesiano E. Agnelli Torino 1983 — 1987
Perito elettrotecnico
Experience
FATA EPC Division of FATA S.p.A. January 2007 - Present
General Electric June 2006 - January 2007
Idest Srl October 2004 - May 2006
TOROC 2005 - 2006
NOICOM January 2001 - October 2004
Idest Srl September 1997 - December 2000
Skills
Power Generation, Distribuzione..., Switchgear, Produzione di energia, Commissioning, Power Plants, Electrical Engineering, Elettricisti, Ingegneria dei progetti, Sistemi elettrici, Project planning, Electricians, Ingegneria, Power Distribution, Elettrotecnica, Fabbriche, Project Engineering, Project management, Energia, AutoCAD, EPC, Engineering, Microsoft Office, Power Systems
Marcello Salis
Senior Software Engineer
Information Technology and Services
Education
Politecnico di Torino 1999 — 2006
Master's degree, Computer Software Engineering
Ecole Nationale Supérieure d'Informatique et de Mathématiques Appliquées de Grenoble 2003 — 2005
Master's degree, Computer Software Engineering, (double degree agreement with Politecnico di Torino)
Experience
AMS Geomatics February 2013 - Present
Indra February 2011 - February 2013
www.tuascommessa.com November 2011 - January 2013
Ericsson August 2010 - January 2011
SENER March 2008 - July 2010
Alcatel-Lucent July 2007 - February 2008
SimFor March 2007 - June 2007
Telecom Italia September 2006 - February 2007
Politecnico di Torino March 2005 - June 2006
Albany International March 2004 - September 2004
Skills
MySQL, Linux, C++, Solaris, Java, Qt, Software Engineering, C/C++, XML, Matlab, Windows, OpenGL, PL/SQL, CORBA, Eclipse, C#, Oracle, C, Ada
Marcello Saporito
Master full time in Management dell'Innovazione presso Fondazione CUOA
Mechanical or Industrial Engineering
Education
Fondazione Cuoa 2012 — 2013
Master Full Time, Management dell'Innovazione
Politecnico di Torino 2009 — 2012
Laurea, Ingegneria Logistica e della Produzione, 96/110
Università degli Studi di Torino 2005 — 2009
Laurea, Filosofia, 108/110
Experience
CONSIDI June 2013 - December 2013
Skills
Product Innovation, Forecasting, Innovation Management, Process Engineering, Production Planning, Microsoft Project, Statistics, Microsoft Office, Business Modeling, Supply Chain Management, Mathematical Analysis
Marcello Savio
Business Analysis, ERP Management System & Project Controlling
Automotive
Education
Collegio San Giuseppe torino
diploma scientifico, liceo scientifico
Politecnico di Torino
Management Engineer, Ingegneria gestionale/Gestione industriale
Experience
Mec S.r.l. December 2014 - Present
I.DE.A. Institute Spa January 2013 - December 2014
I.DE.A. Institute Spa January 2011 - December 2013
I.DE.A. Institute Spa March 2009 - January 2011
I.DE.A. Institute Spa March 2008 - March 2009
Atos Origins March 2007 - March 2008
Skills
Management, Engineering, Project Management, Purchasing, Project Planning, ERP, Lean Manufacturing, Business Analysis, Parts, SAP
Marcello Trentin
NVH performance engineer in Iveco
Automotive
Education
Politecnico di Torino 1992 — 1998
108, Mechanical Engineer
Liceo Scientifico
Experience
Iveco November 2010 - Present
Center Research Fiat January 2008 - November 2010
IDEA INSTITUTE January 1999 - January 2008
Skills
CAE, LS-DYNA, Modal Analysis, CATIA, Nastran, Stress Analysis, Catia, Automotive, Noise Reduction, Finite Element Analysis, NVH, Vehicle Dynamics, Abaqus, Automotive Engineering
Marcellus Wallace
Student at Politecnico di Torino
Education
Politecnico di Torino 2010 — 2011
Marcin Gębala
C++ Software Developer at Macrix Polska Spółka z o. o.
Electrical/Electronic Manufacturing
Education
Poznan University of Technology 2011 — 2012
Master's Degree, Electronics and Telecommunication
Politecnico di Torino 2011 — 2012
Master's Degree, Ingegneria dell'Informazione
Poznan University of Technology 2007 — 2011
Bachelor's Degree, Electronics and Telecommunications, Good
Experience
Macrix Polska Spółka z o. o. October 2014 - Present
Samsung Electronics May 2013 - September 2014
Mentor Graphics July 2012 - May 2013
eVolpe Consulting Group May 2011 - April 2012
eConsulting September 2010 - June 2011
Skills
JavaScript, CSS, HTML, Software Development, Agile Methodologies, HTML 5, PHP, C/C++, jQuery
Marco A. Deriu
Researcher at SUPSI
Research
Education
Politecnico di Torino 2005 — 2008
Experience
University of Applied Sciences and Arts of Southern Switzerland. SUPSI April 2013 - Present
Politecnico di Torino February 2009 - April 2013
Skills
Image Processing, LaTeX, Matlab, Biomedical Engineering, Mathematical Modeling
Marco A. Trevisan
CEO presso VPS s.r.l. Value Purchasing Solutions S.r.l.
Information Technology and Services
Education
Politecnico di Torino 1984 — 1989
Master's degree, Electrical, Electronics and Communications Engineering
Experience
V.P.S. S.r.l. Value Purchasing Solutions S.r.l. April 2011 - Present
Vodafone IT October 2000 - March 2011
Infostrada January 1998 - October 2000
Telecom Italia February 1991 - February 1998
Esercito Italiano October 1989 - January 1991
Skills
Telecomunicazioni
Marco Abate
Project Manager at SAVE Engineering
Aviation & Aerospace
Education
Politecnico di Torino 1996 — 2002
Master of Science (MSc), Electrical Engineering
Norwegian University of Science and Technology (NTNU) 2000 — 2001
MSc, Engineering
Ecole polytechnique fédérale de Lausanne
Graduation Project - "Cracterisation Globale des Environnements Eléctromagnetiques Typiques"
University of Geneva 2013 — 2014
IATA/Université de Genève - Diploma in Advanced Studies in Aviation Management (DAS), Aviation/Airway Management and Operations
Experience
SAVE S.p.A February 2006 - Present
ADPI - Aéroports de Paris 2004 - 2006
Ingegneria Srl October 2002 - 2003
Skills
Project Management, Engineering, Project Planning, Construction Site..., Airports, Works Supervision, Construction, Airport Construction, Airport Development, Construction Management, Electrical Engineering, Submittals, Airport Installations
Marco Abate
Scoring analyst en Citibank
Banking
Education
Universidad Carlos III de Madrid 2005 — 2006
MBA English program
2000 — 2004
INGENIERO TÉCNICO EN ORGANIZACIÓN INDUSTRIAL Especialidad Logística y Producción
2005
2006 MASTER BUSINESS ADMNISTRATION, English
University Carlos III of Madrid
ENGINEER, ORGANIZATIONAL ENGINEERING (Specialization Logistic and Production)
University Polytechnic of Turin
Experience
Citibank & Citifinancial November 2006 - Present
CITIFINANCIAL - CITIBANK November 2006 - Present
APPLIED BIOSYSTEMS November 2005 - February 2006
APPLIED BIOSYSTEMS November 2005 - February 2006
Marco Abbate
Managing Consultant
Management Consulting
Education
Politecnico di Torino 1983 — 1989
Experience
IBM Italy September 2001 - Present
Marco Abrate
Ha frequentato Politecnico di Torino
Education
Politecnico di Torino 2014 — 2016
Laurea Magistrale in Ingegneria Chimica e dei Processi Sostenibili, Ingegneria Chimica e dei Processi Sostenibili
Politecnico di Torino 2010 — 2014
Laurea triennale in Ingegneria Chimica e Alimentare, Ingegneria chimica e alimentare, 100/110
Istituto Tecnico Industriale "Mario Delpozzo"
Diploma di Perito Industriale Capotecnico - Specializzazione: chimico, Perito Chimico, 80/100
Experience
Biraghi S.p.a. June 2009 - July 2009
Biraghi S.p.a. July 2008 - July 2008
Skills
Pacchetto Office (ECDL), Disegno tecnico..., chimica industriale, Chimica organica, C, polimeri, Aspen Plus, impianti chimici, Matlab, Fluent, Chimica analitica, impianti e processi...
Marco Acquadro
Country Sales Manager presso GrozBeckert
Textiles
Education
Politecnico di Torino 1993 — 1995
Informatica, 25/30
Liceo Scientifico
Experience
Groz-Beckert May 2015 - Present
Bekaert August 2009 - May 2015
A2 network Solutions August 2007 - August 2009
Acquadro Rappresentanze May 1992 - August 2007
Skills
Strategia d'impresa, Gestione vendite, General managing, New business development, Microelectronics, IT - VoIP - security, Long staples processing..., Vendite internazionali, Trattative, Strategia di marketing, Sviluppo di prodotto, Microsoft Office, Vendite
Marco Addino
Managing Director at Accenture
Management Consulting
Education
University of Illinois at Chicago 2002 — 2003
MS, ECE
Politecnico di Torino 1998 — 2003
Master of Science (MS), Electrical and Electronics Engineering
Experience
Accenture S.p.A. November 2003 - Present
Skills
Change Management, Quality Management, Transformational..., Automotive, Benchmarking, Software Development, Strategic Sourcing, Organisations, Program Management, Supply Chain, Operations Management, Software Project..., SAP, Supply Management, Production Planning, Management Consulting, Aerospace Industries, Lean Manufacturing, Business Strategy, Team Management, Supply Chain Management, Manufacturing, Project Management, Procurement Outsourcing, Strategic Planning, Product Management, Global Sourcing, Inventory Management
Marco Aggio
Owner presso BLIVING SRL
Furniture
Education
Politecnico di Torino
Facoltà di Architettura
Liceo Scientifico 1989 — 1994
Maturità Scientifica
Experience
BLIVING SRL January 2015 - Present
Tisettanta March 2009 - December 2014
Grande Arredo spa July 2006 - February 2009
Lavoratore autonomo October 1999 - July 2006
Skills
Rendering, Interior Design, AutoCAD Architecture, Progettazione..., Progettazione..., 3D Studio Max, Microsoft Office, AutoCAD, Architettura d'interni, Interior design, Photoshop, Progettazione urbana, Architettura, InDesign
Marco Agnelli
Independant consultant hydraulic engineering
Civil Engineering
Education
Politecnico di Torino 1996 — 2004
Civil Engineering, Ingegneria civile, idraulica.
Liceo Scientifico Statale “Leonardo Cocito, Alba (CN) 1990 — 1995
Maturità Scientifica, Moduli chiave: Matematica, scienze, fisica, chimica, informatica, italiano, inglese
Experience
Marco Agnelli Engineer June 2004 - Present
ALLARA S.p.A. January 2005 - December 2013
ICIS srl April 2009 - October 2010
Metherm srl May 2008 - December 2008
Geomark srl December 2005 - November 2007
Skills
Environmental..., EPANET 2 (Hydraulic..., HEC-HMS 3.5 (Hydrologic..., Program Management, SMS 8.1 (Surface-Water..., AutoCAD, Stormwater Management, Microsoft Office, Environmental Awareness, HEC-RAS, Civil Engineering, Project Planning, Drainage, Hydraulics, Water Resources, Water Management, HEC-RAS 4.1 (River..., SWMM 5 (Storm Water..., Microsoft Excel, Hydrology
Marco Agostino
Tecnico Ambito Energia presso Manutencoop Facility Management
Education
Politecnico di Torino 2005 — 2007
Università degli Studi di Milano 2004 — 2005
Università Carlo Cattaneo - LIUC
Attualmente iscritto., Ingegneria gestionale/Gestione industriale energetica
Experience
Manutencoop April 2008 - Present
Manutencoop October 2006 - March 2008
Ri.co. - Riscaldamento e condizionamento December 2005 - October 2006
Skills
Microsoft Word, Outlook, Research, Public Speaking, Photoshop, Microsoft Excel, Windows, English, Microsoft Office, Teaching, Customer Service, PowerPoint
Marco Aimar
Ha frequentato Politecnico di Torino
Education
Politecnico di Torino 2009 — 2014
Marco Aimasso
Head of Risk Gas at E.ON Global Commodities SE
Oil & Energy
Education
SDA Bocconi 2002 — 2003
MBA
Politecnico di Torino 1992 — 1998
Engineering
Experience
E·ON Global Commodities April 2014 - Present
E.ON Energy Trading SE November 2011 - April 2014
E.ON Energy Trading SE April 2011 - November 2011
E.ON Energy Trading S.p.A. October 2008 - April 2011
E.ON Italia S.p.a. May 2005 - September 2008
Pirelli & C. Real Estate September 2003 - May 2005
IVECO S.p.A September 1999 - November 2002
Skills
Energy Trading, Leadership, Energy Markets, Energy Industry, Derivatives, Commodity, Business Planning, Renewable Energy, Power Generation, Energy Management, Financial Risk, Analysis, Natural Gas, Risk Management, Hedging, Management, Portfolio Management, Commodity Markets, Market Risk, Business Strategy, Trading, Energy, Project Finance, Gas, Electricity Markets
Marco Aime
Cost analyst / Information Technology presso Agla Power Transmission
Automotive
Education
Politecnico di Torino
Ing. Logistica e della produzione, Ing. Gestionale
Experience
Agla Power Transmission November 2011 - Present
Silma Consulting July 2009 - November 2011
GmSinter Group November 2007 - July 2009
Skills
Investments, Cost Accounting, Visio, Cost Management, English, Microsoft Excel, Automotive, Access, Microsoft Office, Budgets, Microsoft Word, ERP Implementations, Cost Reporting, PowerPoint, Outlook, Balance Sheet
Marco Aimo Boot
Alternative Traction Manager presso Iveco
Automotive
Education
Politecnico di Torino 1998 — 2002
Laurea, Electrical Engineering
Politecnico di Torino 1995 — 1998
Bachelor diploma, Electrical Engineering
Experience
Iveco S.p.A. January 2012 - Present
Iveco S.p.A. April 2011 - December 2011
Iveco S.p.A September 2006 - March 2010
Centro Ricerche Fiat April 2003 - June 2006
E.M.T.T. Torino Gruppo Tempora December 2002 - March 2003
Croce Verde Torino June 2002 - September 2002
Croce Verde Torino June 2001 - September 2001
Skills
Electrical Engineering, Business Development, Technology Management, Risk Management, Problem Solving, Team Coordination, Product Development, People Management, Negotiation, Long-term Customer..., Automotive, Team Building, Business Management, Technical Management, Project Planning, Project Management, Decision Making, Resource Management, Alternative Energy
Marco Airola
Vice President Sales, Marketing and Service at Danfoss Drives, SETMA Region
Electrical/Electronic Manufacturing
Education
Ashridge Business School 2006 — 2006
Accelerated Development Program, Leadership, Master
Politecnico di Torino 1987 — 1993
Laurea, Ingegneria Meccanica
Liceo Scientifico 1983 — 1987
Maturità scientifica
Experience
Danfoss Drives AS May 2015 - Present
Danfoss Power Electronics A/S August 2008 - April 2015
Danfoss IA June 2004 - July 2008
Danfoss IA April 2000 - May 2004
Varian February 1994 - March 2000
Skills
B2B, Sales Management, Sales, International Sales, Management, New Business Development, Leadership, Product Development, Business Development, Marketing, Key Account Management, Direct Sales, Product Management
Marco Albanesi
R&D Mobility Engineer presso Loccioni Group
Mechanical or Industrial Engineering
Education
Politecnico di Torino 2012 — 2013
Research Scholarship in Mechanical and Aerospace Engineering
Politecnico di Torino 2009 — 2012
Master's degree, Ingegneria aerospaziale, aeronautica e astronautica/spaziale
The University of Glasgow 2010 — 2011
LLP/Erasmus in University of Glasgow
Politecnico di Torino 2006 — 2009
Bachelor's degree, Ingegneria aerospaziale, aeronautica e astronautica/spaziale
Experience
Loccioni Group June 2014 - Present
GE Oil & Gas February 2013 - January 2014
Skills
Creep, Power Systems, Thermal Analysis, Fracture Mechanics, CATIA, Wind Turbines, Dynamics, Workbench, Microsoft Excel, Steam Turbines, Structural Dynamics, Aerospace, Structural Analysis, ANSYS, Non-linear Analysis, Aerodynamics, Turbomachinery, Turbine a gas, Structural Engineering, Modal Analysis, Report Writing, Mechanics, SolidWorks, Energy, Testing, Gas Turbines, Vibration Testing, Aerodinamica, Fluid Dynamics, Aeroelasticity, Power Generation, Thermal Oxidation, Fatigue, Machine Design, Aeronautics, Vibration, NI LabVIEW, Unigraphics NX, Energia, Aerospaziale, UGS NX5, Compressor
Marco Alberto Spadacini
Brake System Engineer presso Faiveley Transport
Railroad Manufacture
Education
Politecnico di Torino
Ingegneria meccanica
Liceo Classico
Experience
Faiveley Transport May 2014 - Present
Faiveley Transport August 2011 - April 2014
ICAS spa 2010 - 2011
Skills
Pneumatics, PLC, Systems Engineering, Ingegneria dei sistemi, Mechanical Engineering, Commissioning, Ingegneria meccanica, SCADA, Power Systems, Mechatronics, Hydraulics, CAD/CAM, Field Work, Pneumatica, Rail, Ferrovie, Air Brakes
Marco Alessandria
Supply Chain Engineering Network Design Manager presso Fiat Group Automobiles
Logistics and Supply Chain
Education
Politecnico di Torino 1990 — 1997
Ingegneria Gestionale, Politecnico di Torino
Liceo Scientifico 1985 — 1990
Experience
Fiat Spa May 2013 - Present
Fiat Spa January 2013 - May 2013
Fiat Group Automobiles March 2011 - December 2012
Fiat Group Automobiles January 2010 - March 2011
CEVA Logistics December 2006 - December 2009
TNT Logistics July 2003 - December 2006
Skills
Kanban, Continuous improvement, Ottimizzazione della..., Project Planning, Production Planning, Trasporti, Transportation, Project planning, Logistica, Warehousing, Continuous Improvement, Gestione supply chain, Magazzino, Logistics Management, 5S, Automotive, Warehouse Management, Gestione magazzino, Management, Supply Chain, Materials Management, Supply chain, Supply Chain Management, Gestione logistica, Supply Chain..., Key Performance..., Logistics, Network Design, WMS Design, Industria..., Lean Manufacturing, Key Performance...
Marco Alessandria
Product Engineer presso Eaton Automotive
Automotive
Education
Politecnico di Torino 2005 — 2007
Laurea Magistrale, Ingegneria Meccanica, 104/110
Politecnico di Torino 2001 — 2005
Laurea di primo Livello, Ingengeria Meccanica, 101/110
Blaise Pascal, Giaveno (TO) 1996 — 2001
Diploma, Liceo Scientifico, 77/100
Experience
Eaton November 2014 - Present
Eaton Automotive April 2013 - November 2014
Eaton April 2011 - April 2013
Eaton - Vehicle Group February 2008 - April 2011
Magneti Marelli S.p.A. - Electronic Systems and Powertrain October 2007 - February 2008
Skills
Engineering, Automotive Engineering, Engineering Management, Pro Engineer, Automotive, Six Sigma, 5S, PPAP, APQP, Manufacturing..., Continuous Improvement, Manufacturing, DFMEA, FMEA, Lean Manufacturing
Marco Alfani
Team Manager at Consoft Sistemi
Information Technology and Services
Education
Politecnico di Torino 2004 — 2008
Graduate Degree (110/110), Telematics Engineering
Università degli Studi di Napoli 'Federico II' 2000 — 2004
Bachelor Degree, Telecomunications Engineering
Experience
Consoft Sistemi July 2015 - Present
Reply March 2012 - July 2015
Reply January 2012 - July 2015
Reply October 2008 - July 2015
Reply August 2010 - June 2011
Reply May 2008 - October 2008
Skills
CSS, XSLT, IIS, Photoshop, SharePoint Designer, Microsoft SQL Server, Web Applications, Databases, Visual Studio, Software Project..., Lightroom, jQuery, JavaScript, SharePoint 2010, SharePoint, .NET, C#, Web Development, HTML, SharePoint 2007
Marco Alifredi
Junior Lean manager presso Ecopack spa
Mechanical or Industrial Engineering
Education
Politecnico di Torino 2011 — 2013
Master's degree, Ingegneria della produzione industriale, 104
Universitat Internacional de Catalunya 2011 — 2012
Master's degree, Business/Managerial Economics
Politecnico di Torino 2008 — 2012
Bachelor's degree, Industrial Engineering, 90
Experience
Ecopack spa December 2013 - Present
Freudenberg Technical Products LP April 2013 - August 2013
Illusion art music festival September 2010 - January 2011
Freudenberg iberica March 2010 - July 2010
Rmi service July 2006 - July 2007
Skills
Lingua inglese, Production Managment, Management, Logistica, Business plan, Produzione snella, Project management, Lavoro di squadra, Trattative, PowerPoint, Lean Management, Project Managers, Strategia d'impresa, Business Planning, Marketing, Humanistic, SAP, Microsoft Excel, Lean Thinking, Microsoft Word
Marco Alioto
Manufacturing Expert...Crazed Photographer...Biker...Dad
Mechanical or Industrial Engineering
Education
Politecnico di Torino 1997 — 2005
Master of Science, Mechanical Engineering
Universidad Politecnica de Madrid 2003 — 2004
Master of Science, Industrial Engineering
Experience
Schlumberger June 2015 - Present
Schlumberger April 2011 - May 2015
Schlumberger January 2010 - March 2011
Schlumberger September 2006 - December 2009
Fiat Auto June 2006 - August 2006
Avio February 2006 - May 2006
Abarth & C. Spa January 2005 - October 2005
BEST - Board of European Students of Technology June 2002 - June 2003
Skills
5S, Kaizen, Six Sigma, Manufacturing..., Oilfield, Mechanical Engineering, Materials, Wireline, Commitment to Excellence, Team Leadership, Manufacturing, Flexibility, Offshore Drilling, Problem Solving, Lean Manufacturing, Formation Evaluation, Engineering, Project Engineering
Marco Allegri
Student at Athlone Institute of Technology
Education
Politecnico di Torino 2013 — 2015
Experience
Athlone Institute of Technology September 2014 - Present
Skills
Microsoft Word, Microsoft Excel, Management, Microsoft Office, Project Management, Problem Solving, PowerPoint
Marco Allocco
ingegnere elettronicoprogettazione HW/FW
Computer Hardware
Education
Politecnico di Torino 2013 — 2015
Laurea magistrale in ingegneria elettronica, elettronica analogica e di potenza
Politecnico di Torino 2008 — 2013
laurea in ingegneria elettronica
Experience
Mager Air Bearings October 2014 - September 2015
Skills
Matlab, C#, C, Firmware, mikrobasic, VHDL, progettazione..., Hardware, strumentazione di misura, Simulink, controllo motori, Arduino (hardware), Elettronica di potenza
Marco Altafini
Mechatronic Engineer presso Bhaitech
Research
Education
Politecnico di Torino 2012 — 2014
Master's degree, Mechatronic engineering, 110/110
Università degli Studi di Ferrara 2008 — 2012
Bachelor's degree, Ingegneria dell'informazione (Curriculum automazione)
Experience
Bhaitech s.r.l. June 2015 - Present
Politecnico di Torino January 2015 - April 2015
Skills
Communication, Matlab, Problem Solving, Robotics, Java, Elettronica, Programming Languages, Operating Systems, Automation, Automazione, Controllore logico..., PLC Programming, Electronics, Acquisition Integration, IEC61131, C#, Volunteering, TwinCAT, Design Control, Robotica, Progettazione sistemi..., Finite Element Analysis, Leadership, C, CNC Programming, Organization Skills, SolidWorks, Measurement Systems, PLC Ladder Logic, Control Systems Design, Group Work, PLC Structured Text
Marco Amedeo
Master Thesis Project presso Ostbayerischen Technischen Hochschule Regensburg
Mechanical or Industrial Engineering
Education
Politecnico di Torino 2013 — 2015
Master's degree, Ingegneria meccanica
Politecnico di Torino 2010 — 2013
Bachelor of Engineering (BEng), Ingegneria Meccanica (Mechanical Engineering), 94/110
Experience
Ostbayerischen Technischen Hochschule Regensburg September 2015 - Present
Skills
SolidWorks, Simulink, AutoCAD, Microsoft Office, Matlab
Marco Andrea Luca Branca
Researcher presso ISMB
Telecommunications
Education
Politecnico di Torino 2002 — 2011
laurea magistrale, telecomunicazioni
Experience
ISMB January 2015 - Present
Politecnico di Torino November 2012 - May 2014
Politecnico di Torino May 2012 - May 2014
Blue Sof Consulting SpA December 2011 - March 2012
Politecnico di Torino May 2007 - November 2011
Skills
Word, Ingegneria, C, Microsoft Word, Excel, PowerPoint, Visual Studio, C#, Engineering, Linux, English, Server Microsoft SQL, Programmazione, Programming, Elaborazione del segnale, Matlab, Telecommunications, Bootstrap, .NET, Signal Processing, Photoshop, Animation, Lingua inglese, Algoritmi, Microsoft Office, Java, Microsoft Excel, C++, Telecomunicazioni
Marco Andrea Oberto
Professional presso Fiat Group
Automotive
Education
Politecnico di Torino 1994 — 2000
Mechanical Engineering, 102/110
Experience
Fiat Group October 2002 - Present
Politecnico di Torino September 2000 - September 2001
Skills
Marketing Strategy, Continuous Improvement, Simulations, Microsoft Excel, Product Development, Matlab, English, Engineering, Research, Brake Specialist for..., Automotive, EPB (Electric Parking..., Project Chief (Project..., ABS, ASR, ESC specialist
Marco Andreis
Plant Manager Tractors Plant
Machinery
Education
Politecnico di Torino 1996 — 2001
Bachelor of Engineering, Materials, 108/110
Liceo Scientifico 1991 — 1996
Experience
CNH Industrial September 2014 - Present
CNH Industrial August 2012 - August 2014
CNH Industrial January 2010 - July 2012
CNH Industrial March 2008 - January 2010
Meridian Lightweight Technologies Inc. December 2004 - February 2008
Meridian Lightweight Technologies Inc. March 2004 - November 2004
Meridian Lightweight Technologies Inc. June 2002 - February 2004
Meridian Lightweight Technologies Inc. January 2002 - May 2002
Skills
International Management, Continuous improvement, Process Engineering, Lean Manufacturing, Industrial Engineering, APQP, Quality Management, Supplier Quality, ISO, Manufacturing, PPAP, Quality Assurance, Startegy
Marco Anfossi
Programmatore sistemi di automazione industriale,Protea\Amministratore ABA SERVICE srl. Marketing e consulenza aziendale
Industrial Automation
Education
Politecnico di Torino
Ingegnere, Ingegneria Elettrica
Experience
Protea srl May 2014 - Present
ABA SERVICE srl 2011 - Present
GET IMPRESSED srl August 2011 - August 2013
DLite events and congress 2008 - 2011
Atmosphere Diving Center June 2002 - September 2006
Skills
Marketing Communications, Marketing communication, Social media marketing, Marketing Strategy, Strategia di marketing, Pubbliche relazioni, Business plan, Social media, Management, Lingua inglese, Microsoft Office, Social Media, Gestione eventi, Social networking, Social Media Marketing, Marketing, Marketing digitale, Strategia d'impresa, Pubblicità
Marco Anfossi
ICT Senior Consultant & Service Manager at Solve.It Srl
Information Technology and Services
Education
Politecnico di Torino
Engineer's Degree, Electrical, Electronic and Communications Engineering Technology/Technician, 97/110
Experience
Solve.It Srl December 2014 - Present
RGI Group July 2010 - Present
Marathon September 2009 - July 2010
HP November 2006 - August 2009
Motorola November 2005 - October 2006
Skills
Integration, Sviluppo di software, Linux, XML, Gestione servizi IT, Testing, HP, REXX, Java, Project management, Integrazione, ITIL, Service Management, Gestione progetti..., Server, Visual Basic, JavaScript, SQL, Certificazione ITIL..., Servers, Project Portfolio..., Oracle
Marco Angelini
Head of Utilities presso Selex ES S.p.A.
Defense & Space
Education
Politecnico di Torino 1989 — 1994
Ingegneria, Chimica
Experience
Selex ES S.p.A. February 2013 - Present
Consorzio Lanterna Energia February 2013 - Present
Selex Communications May 2001 - June 2010
Marconi 2001 - 2004
Saiwa 1999 - May 2001
Saiwa 1995 - 1999
Agnesi Spa 1994 - 1995
Marco Angeloni
OMLP Program Associate presso GE Aviation
Logistics and Supply Chain
Education
Politecnico di Torino 2012 — 2014
MD in Mechanical Engineering, 110/110 cum laude
Sapienza Università di Roma 2007 — 2011
Bachelor's degree, Mechanical Engineering, 110/110
Experience
GE Aviation August 2015 - Present
GE Oil & Gas 2015 - July 2015
Skills
Lean Production, PowerPoint, Problem Solving, Microsoft Office, Problem solving, Lingua inglese, Teamwork, Maintenance in..., SolidWorks, Manifattura, Manufacturing..., Ingegneria meccanica
Marco Angelucci
EMEA Sales&Operations Manager at IVECO
Automotive
Education
Politecnico di Torino 1995 — 2000
2000, INGEGNERIA GESTIONALE
Liceo Scientifico 1990 — 1995
1995, Maturità Scientifica
Experience
Iveco March 2013 - Present
Iveco September 2009 - March 2013
Iveco 2007 - September 2009
SEAT Pagine Gialle S.p.A. June 2006 - July 2007
Kimberly-Clark 2000 - 2007
Kimberly-Clark 2000 - 2006
Skills
MRP, Supply Chain, Supply Chain..., Supply Chain Management, Manufacturing, SAP, Materials Management, Supply Management, Lean Manufacturing, Cross-functional Team..., Production Planning, Project Planning, Demand Planning, Logistics, Continuous Improvement
Marco Aniballi
Amministratore, TCI IMPIANTI S.r.l.
Construction
Education
Liceo Scientifico Galileo Galilei
diploma
Politecnico di Torino
Ingegnere meccanico, Politecnico di Torino
Experience
TCI IMPIANTI S.r.l. 2000 - Present
Skills
Microsoft Office, Negotiation, Construction Management, AutoCAD, Contractors, Customer Service, Microsoft Excel, Contract Management, Project Management, Contract Negotiation, Project Planning, Microsoft Word, Construction, Budgets
Marco Annoni
Innovation Area Manager "ITS, Logistics & Tourism" at Telecom Italia
Telecommunications
Education
Politecnico di Torino 1979 — 1984
Dottore in Ingegneria, Elettronica
ITIS E.Agnelli - Torino 1974 — 1978
Perito, Elettronica
Experience
ETSI October 2010 - Present
Telecom Italia November 2008 - Present
Telecom Italia January 2004 - November 2008
Telecom Italia 2000 - 2004
Telecom Italia - TILAB 1994 - 2000
CSELT 1989 - 1994
CSELT September 1985 - 1989
Synarea Consultants 1984 - 1985
Skills
Networking, Project management, Management, Telecommunications, UMTS, R&D, Broadband, Standardization, Project Planning, Program management, Analysis, International Project..., Mobile Devices, Integration, Innovation, Product Management, Security, Strategy, eCall, Team Leadership, Testing, Program Management, Wireless, Team Management, LTE, System Architecture, Music, Strategic Thinking, ICT, Project Management, Project Coordination
Marco Antognozzi
Technology Project Manager | Internal Communication Expert
Information Technology and Services
Education
Politecnico di Torino 2006 — 2009
Master of Science (MSc), Media Engineering, 110 / 110 (cum laude)
ELS Language Centers – Santa Monica (CA) 2007 — 2007
American-English course, Semi-Intensive English Program
Politecnico di Torino 2003 — 2006
Bachelor of Science (BS), Media Engineering, 110/110
Experience
Reply April 2012 - Present
Reply October 2009 - March 2012
Politecnico di Torino June 2009 - September 2009
Indyca January 2009 - September 2009
Fondazione per il Libro, la Musica e la Cultura May 2009 - May 2009
NBC Olympics January 2006 - February 2006
Skills
Social Media, User-centered Design, Project Management, Multimedia, Video Production, Agile Project Management, User Experience Design, Web Project Management, Creative Direction, Employee Engagement, Social media, Event Management, Collaboration Tools, Multimedia Project..., Project management, Web Development, HTML, Live Video Streaming, Information Design, User Experience, CSS, New Media, Online User Experience
Marco Antonio BORSI
Deputy Head of Design
Aviation & Aerospace
Education
1973 — 1979
Ingegnere Aeronautico, Progetto e costruzione velivoli
I.T.I.S. Amedeo Avogadro 1968 — 1973
Perito Aeronautico, Progetto e costruzione velivoli
Experience
Alenia Aeronautica December 2010 - Present
Alenia Aeronautica December 2007 - December 2010
Alenia Aeronautica 2002 - December 2007
Skills
Aeronautics, Flight Test, Aerospace, Avionics, CFD, Aircraft, Aerodynamics, Systems Engineering, Aviation, Aircraft Design, Project Management
Marco Antonio Bruno
Safety Engineer at Bombardier Germany
Transportation/Trucking/Railroad
Education
Politecnico di Torino 2000 — 2006
Seconda Università degli Studi di Napoli
Experience
Bombardier Transportation September 2013 - Present
Alstom Transport as a consultant May 2012 - July 2013
Sapa Group January 2012 - May 2012
Ansaldo STS as a Consultant April 2011 - December 2011
Ansaldo STS as a Consultant April 2009 - April 2011
Ansaldo STS as a Consultant January 2008 - April 2009
Ribes Informatica Ivrea (Torino) January 2008 - April 2008
CSI piemonte April 2007 - November 2007
Skills
RAMS, Java, C, C++, Requirements Analysis, Integration, VHDL, UML, Independent..., Test Planning, XML, Embedded Software, Embedded Systems, Linux, On site Testing, Systems Engineering, SQL, Testing