Politecnico di Torino, Torino
The Politecnico di Torino is one of the most important universities in Europe for engineering and architecture studies, strongly committed to collaboration with industry. Politecnico is a research university that participates at the highest levels of international scientific research. Research activities, are structured in four macro-areas: Industrial Engineering; Information Technology; Management and Mathematical Engineering; Civil, Environmental, Architecture and Design Engineering.
The new campus hosts the Business Research Center that provides partners with office space and laboratories for innovation and technology transfer.
The new campus hosts the Business Research Center that provides partners with office space and laboratories for innovation and technology transfer.
Politecnico di Torino Alumni
Leo Italiano
Senior Business Consultant (I3P Innovative Companies Incubator of Politecnico of Torino); Business Coach (EASME)
Management Consulting
Education
Politecnico di Torino 2007 — 2010
Master of Science, Industrial Engineering and Management
Politecnico di Torino 2004 — 2007
Bachelor Degree, Business Organization Engineering
Experience
EASME - Executive Agency for Small & Medium-sized Enterprises - European Commission December 2014 - Present
I3P – Innovative Companies Incubator of Politecnico of Torino February 2010 - Present
University of Turin September 2014 - Present
, April 2011 - Present
Skills
Business Modeling, Consulenza manageriale, Project Management, Business Intelligence, Business Analysis, Project management, Start-ups, Start-up, Business Planning, Innovation Management, Strategia d'impresa, Business Strategy, Entrepreneurship, Business plan, Business development, Management Consulting
Leo Italiano, Ph.D.
Organization Project Manager at Ferrero
Food & Beverages
Education
Politecnico di Torino 2008 — 2010
PhD, entrepreneurial strategy and finance
AIFI
Private Equity and Venture Capital
Politecnico di Torino 2004 — 2007
MSc
Helsinki University of Technology 2005 — 2005
Erasmus, Industrial and management engineering
Politecnico di Torino 2001 — 2004
BA
Experience
Ferrero May 2013 - Present
The Boston Consulting Group May 2011 - May 2013
Tre Tau Engineering October 2008 - December 2012
SOGES spa February 2010 - April 2011
Tre Tau Engineering October 2008 - October 2009
Politecnico di Torino July 2007 - December 2007
Skills
Strategic Planning, English, Corporate Development, Organizational..., Supply Chain, Marketing Strategy, Team Management, Market Analysis, International Business, Business Planning, Entrepreneurship, International Project..., Business Modeling, Negotiation, Innovation Management, Start-ups, Market Entry, Venture Capital, Strategy Development, Management Consulting, Competitive Analysis, Restructuring, New Business Development, Market Research, Mergers & Acquisitions, Project Planning, Leadership, Project Management, Entrepreneurial Skills, Management, Strategy, Marketing Management, Marketing, Due Diligence, Private Equity, Research, Product Development, Finance, Industry Analysis, Strategic Consulting, Engineering, Change Management, Investments, Analysis, Business Strategy, Team Building, Knowledge Sharing, Business Development
Leo Rizzo
Implementation Manager Indipendent Contractor at OSA
Hospital & Health Care
Education
Escuela de Organización Industrial 2008 — 2009
MBA Executive MBA
Politecnico di Torino 1989 — 1995
Experience
OSA June 2009 - Present
Intercontinental Bank Plc January 2009 - April 2009
Moviquity March 2006 - December 2008
Tecsidel S.A. August 2005 - February 2006
One-Ans May 1999 - July 2005
Telecom Italia Lab 1997 - 1998
Skills
Spanish, Team Management, Project Control, Project Implementation, Vendor Management, Netcool, Requirements Analysis, Microsoft CRM, ERP Software, Management, Pre-sales, ITIL, System Deployment, Client Liaison, ERP Implementations, Solution Architecture, IT Service Management, Microsoft Dynamics NAV, C#, OSS, Telecommunications, Project Planning, C/AL, Integration, Project Management
Leo Vigna
Energy Consultant @ Vodafone Global Infrastructure, Resilience & Energy
Mechanical or Industrial Engineering
Education
Politecnico di Torino 2010 — 2013
Master's degree, Energy Engineering, 108/110
Politecnico di Torino 2006 — 2010
Bachelor's degree, Energy and Nuclear Engineering
Liceo Scientifico G. Peano, Cuneo 2001 — 2006
Maturità scientifica
Experience
Sytel Reply January 2014 - Present
Universidad de Sevilla September 2012 - March 2013
Skills
DC Power, Simulink, Cooling System, Data Center..., Concentrated Solar Power, CFD, UPS systems, Renewable Energy, HVAC, Energy Efficiency, Energy, Power Generation, Fuel Cells, Matlab, ORC, EES, Oil/Gas, Cogeneration, Data Center Design, Energy Industry, Switching Center..., Solar Energy, Data Center Cooling..., FreeFEM, Risk Analysis of Energy...
Leonard Van Schalkwyk
Pensionato, exlibero professionista Informatica e servizi
Information Technology and Services
Education
1969 — 1973
Ingegneria Elettronica, Informatica, Inglese
Experience
FPT Industrial 2007 - August 2013
Solve.it S.r.l. 2004 - 2011
Global Value 1999 - 2007
Digital Equipment 1978 - 1994
Skills
Integration, Outsourcing, Telecommunications, Enterprise Architecture, Program Management, Project Management, Software Development, IT Management, IT Service Management, ITIL, Team Management, IT Strategy, Pre-sales, Software Project..., Change Management
Leonardo Bello
Ingegnere presso EDF (Fenice SpA Italy)
Oil & Energy
Education
Politecnico di Torino 1979 — 1984
Laurea, Ingegneria meccanica
Experience
EDF (Fenice SpA Italy) February 2006 - Present
ADAMS S.r.l. Torino July 2003 - February 2006
DESA S.r.l. Torino September 1994 - June 2003
Skills
Centrali, Strategia d'impresa, Ingegneria dei progetti, Energie rinnovabili, Ingegneria, Produzione di energia, Project planning, Esercizio della..., Gestione dell'energia, Coordinatori della..., Esperto Gestione..., Efficienza energetica, Iscrizione alla lista..., Energia
Leonardo Caramia
Proprietario, ABA srl
Information Technology and Services
Education
Politecnico di Torino
Leonardo Casucci
Software Engineer
Computer Software
Education
Politecnico di Torino 2009 — 2012
Laurea Magistrale in Ingegneria Telematica, ICT, 110/110
Technische Universität Hamburg - Harburg 2010 — 2011
M.Sc. Communication and Information Technologies, ITC, 1.8
Politecnico di Torino 2006 — 2009
Ingengeria delle Telecomunicazioni, TLC
Experience
Klopotek September 2015 - Present
Studio Tecnico Ing. Leonardo Casucci April 2013 - Present
Exprivia July 2014 - September 2015
Reply April 2012 - July 2014
Reply January 2012 - April 2012
Technische Universität Hamburg-Harburg June 2011 - November 2011
Feedback Italia March 2009 - June 2009
Skills
Wireless Sensor Networks, Wireshark, Network Security, Google Analytics, Java, Bash, HTML, Tomcat, Network Simulation, Struts, BI Publisher, BIRT, Java Enterprise Edition, TCP/IP, jQuery, Eclipse, Maven, SQL, MySQL, Microsoft Office, C, IEEE 802.11, JBoss Application Server, C#, C++, GWT, Delphi, Web Applications, Matlab, UDP, Omnet++, DOS, PhoneGap, VHDL, EJB, JavaScript, Windows, CPLEX, Oracle SQL, CSS, Glassfish, Confluence, Ant, Weblogic, XML, JQuery UI, Linux, IEEE 802.3, Spring, Network Engineering
Leonardo Centola
Borsista presso Comau
Mechanical or Industrial Engineering
Education
Politecnico di Torino 2014 — 2015
Corso di Formazione e Specializzazione, Ingegneria informatica
Università di Roma Tor Vergata 2007 — 2013
Ingegnere
Università di Roma Tor Vergata 2010 — 2012
Ingegneria, Energetica, 110/110 e lode
Experience
Comau July 2014 - Present
Skills
Microsoft Office, Efficienza energetica, Tia Portal, SolidWorks, Java
Leonardo Cera
Project Manager at AVL
Automotive
Education
Politecnico di Torino 1990 — 1997
Experience
AVL April 2002 - Present
Automobiles Peugeot April 2001 - March 2002
Magneti Marelli PowerTrain November 1998 - March 2001
Leonardo Cerato
IT Project Manager & Sr. Programmer Analyst
Mechanical or Industrial Engineering
Education
Politecnico di Torino 1997 — 2003
Laurea (5 anni)
University of Illinois at Chicago 2000 — 2002
Master of Science (M.S.)
I.T.C. F.A. Bonelli 1993 — 1997
Diploma
Experience
BOTTERO SpA February 2008 - Present
Industrie COMETTO S.p.A. April 2004 - Present
Skills
Java, Applicazioni Web, SQL, C++, CRM, MySQL, Photoshop, UML, Database, Project management, OOP, Visual Basic, JavaScript, PHP, XML, CSS, Information Technology, C, LAMP (piattaforma)
Leonardo Cescon
Amministratore delegato at Venest Spa
Plastics
Education
Politecnico di Torino 2000 — 2005
laurea magistrale in ingegneria dell'autoveicolo
Experience
Venest Spa February 2009 - March 2015
Fibrotermica Spa March 2012 - February 2015
Fibrotermica Hellas AE October 2012 - October 2014
Tegola Canadese SpA September 2008 - January 2009
Quintegia March 2007 - August 2008
Arthur D. Little 2006 - 2007
Skills
Turnaround Experience, Reorganization, Negotiation, Business Development, Mergers & Acquisitions, Cost Reduction..., International Business, Process Optimization, Management, Business Strategy, Business Planning, Marketing Strategy, Corporate Finance, Management Consulting, Market Research
Leonardo Cescon
researcher at Quintegia
Automotive
Education
Politecnico di Torino 2000 — 2005
Leonardo Cicogna
Sviluppatore presso ATS Advanced Technology Solutions SA
Information Technology and Services
Education
Politecnico di Torino 2002 — 2007
laurea, Ingegneria informatica
Experience
ATS - Advanced Technology Solutions SA January 2008 - Present
ATS - Advanced Technology Solutions SA 2013 - 2014
Skills
Research, Editing, Microsoft Excel, PowerPoint, Public Speaking, C++, Windows, Outlook, Strategic Planning, Photoshop, Customer Service, Microsoft Office, C, Java, HTML, Teaching, Budgets, Negotiation, Microsoft Word, English
Leonardo D'Auria
Owner at Azienda Agricola Biologica Leonardo D'Auria
Furniture
Education
Politecnico di Torino 2002 — 2008
Engineering student, Management Information Systems, General
Politecnico di Torino
Experience
Azienda Agricola Biologica Leonardo D'Auria August 2001 - Present
Leonardo D'Auria September 2010 - Present
AB imballaggi September 2008 - September 2009
Skills
Product Marketing, Product Management, Event Management, Social Media Marketing, Public Relations, Management, Sports Coaching, Martial Arts, Social Media, Product Development, Negotiation, Public Speaking, Teacher Training, MMA
Leonardo Fortuna
VoIP Engineer at BroadSoft
Telecommunications
Education
Politecnico di Torino 2010 — 2010
II Level Specializing Master "Networks and services innovation in the ICT sector"
Università di Pisa 2002 — 2008
110/110 cum laude, Telecommunication Engineering
Liceo Scientifico Statale "Paolo Ruffini" 1997 — 2002
100/100
Experience
BroadSoft November 2011 - Present
Telecom Italia July 2010 - July 2011
Intecs September 2009 - December 2009
Altran Italia S.p.A. May 2009 - August 2009
Skills
Mobile Networking, IMS, Integration, IMS DB/DC, Mobile Devices, Telecommunications, UMTS, GSM, Call Processing, Networking, VoIP, IP Multimedia Subsystem, SIP, Telephony, Unified Communications
Leonardo Giacalone
maintenance engineer presso SaintGobain verallia
Automotive
Education
Politecnico di Torino 2012 — 2012
Master di II livello, AMS: Affidabilità, manutenzione e sicurezza: metodi di analisi e gestione
Politecnico di Torino 2009 — 2011
Laurea magistrale in Ingegneria Chimica, Ingegneria chimica, 108 /110
Politecnico di Torino 2006 — 2009
Laurea triennale in Ingegneria Chimica, Ingegneria chimica, 102 /110
Piero gobetti 2001 — 2006
Maturità scientifica
Experience
Saint-Gobain verallia April 2013 - Present
Michelin February 2012 - November 2012
Michelin 2012 - 2012
Skills
French, ECDL Certification, ingegneria di processo, IELTS, AutoCAD, ingegneria manutenzione, Aspen Plus
Leonardo Ippolito
Ingegnere
Civil Engineering
Education
Politecnico di Torino 1994 — 1999
Ingegneria Cicvile - Indirizzo Strutture
Experience
Self-employed February 2001 - Present
Leonardo Maddalena
Account Manager presso Simav s.p.a.
Facilities Services
Education
Politecnico di Torino
Università di Roma "La Sapienza"
Experience
Simav s.p.a. February 2010 - Present
Simav s.p.a. January 2009 - January 2010
Leonardo Massai
Mathematical Engineer
Mechanical or Industrial Engineering
Education
Politecnico di Torino 2012 — 2015
Ingegneria matematica, Facoltà di ingegneria, 110 cum laude
Università di Pisa 2008 — 2011
ingegneria gestionale, Facoltà di ingegneria
Experience
Politecnico di Torino October 2012 - March 2015
Skills
Modellazione matematica, Ricerca, C++, Business Process, Modeling, Business Analysis, Mathematics, Process Optimization, Optimization, Business Strategy, Portfolio Optimization, Ingegneria, Matlab, Dynamic Modeling, Mathematical Modeling, Statistical Modeling, Mathematical Analysis, Applied Mathematics, Discrete Mathematics
Leonardo Mattioli
Graduate Engineer presso Ricardo
Automotive
Education
Politecnico di Torino 2012 — 2014
Automotive Engineer, Master of Science in Automotive Engineering, 108/110
Università Politecnica delle Marche 2009 — 2012
Dottore in Ingegneria Meccanica, Ingegneria Meccanica, 109/110
Experience
Ricardo October 2014 - Present
IFP Energies nouvelles March 2014 - September 2014
Bimota Motorcycles March 2012 - April 2012
Simonelli Moto s.a.s 2005 - 2008
Skills
Hyperworks, Catia, Simulink, Problem Solving, Goal Oriented, Matlab, Teamwork, Adobe Illustrator, PLC Programming, GT-Power, Microsoft Office, CAD, Solid Edge, Automotive Engineering, Star-CCM+, Adobe InDesign, Rhinoceros, Siemens S7, Nastran, WAVE, Hypermesh, Solidworks, CFD, SolidWorks, Motorcycle Industry, Adobe Photoshop
Leonardo Mennella
Sviluppo prodotto
Electrical/Electronic Manufacturing
Education
Politecnico di Torino
Engineer's degree, Ingegneria elettrica
Experience
DENSO Manufacturing Italia S.p.A.
Skills
Kaizen Leadership, Continuous improvement, Process Optimization, Supply Chain Management, Gestione qualità, Quality Assurance, Ingegneria dei processi, Project management, Team Leadership, Process Engineering, Product Design, R&D, Business plan, Project Management, Coaching Staff, FMEA, Kaizen, Ingegneria, Produzione snella, Gestione supply chain, Lean Manufacturing, Trattative, Miglioramento processi, Sviluppo di prodotto
Leonardo Merlo
Senior Engineer at Enel
Utilities
Education
Politecnico di Torino
Mechanical Engineering
Experience
Enel EngineerConphoebus1985 - 2000
Skills
Photovoltaics, Concentrated Solar Power, HVAC, Project Management, Project Planning, Power Plants, Power Generation, Renewable Energy, Energy Efficiency
Leonardo Napoli
Innovation engineer at APR s.r.l.
Information Technology and Services
Education
Politecnico di Torino 2009 — 2014
Master's degree, Ingegneria della produzione industriale
Universitat Internacional de Catalunya 2010 — 2012
Master of Business Administration (MBA), Amministrazione e gestione aziendale, generale
Experience
APR srl March 2014 - Present
SEAT, S.A. March 2011 - July 2011
Skills
Ricerca e sviluppo, Airplane, Additive Manufacturing, Project Management, HTML, Rapid Prototyping, R&D, Project management, Plant Layout, Software Development, Management, SQL, Aeronautics, Team Leadership, Business Analysis, Change Management, Computer Network...
Leonardo Orazi
R&D Engineer in Security and Data Monitoring System
Information Technology and Services
Education
Politecnico di Torino
Bachelor’s degree, Computer Engineering
Experience
PB Elettronica S.r.l. November 2005 - Present
GEODATA Engineering S.p.A. January 2002 - October 2005
Best Engineering S.p.a. January 1998 - October 2001
Skills
C, System Integrators, C++, .NET, Networking Protocol, Client Server..., GIS Modeling, VB.NET, MySQL, GIS Application, TCP/IP protocols, Microcontrollers, Java, Microsoft SQL Server, C#, Assembly Language, ASP.NET, ASP
Leonardo Peretti
PROTOCUBE s.r.l. cofounder
Design
Education
Politecnico di Torino 1999 — 2005
Engineer's Degree, Construction Engineering
Liceo Scientifico
Experience
PROTOCUBE srl January 2006 - Present
Politecnico di Torino 2005 - 2005
Skills
3D Modeling, Rhino, Additive Manufacturing, 3D, Lighting, Photoshop, 3D Studio Max, Interior Design, Microsoft Word, After Effects, Illustrator, Microsoft Excel, Magics, Microsoft Office, Rendering, AutoCAD
Leonardo Regano
PhD student at Politecnico di Torino
Internet
Education
Politecnico di Torino 2013 — 2015
Master's degree, Ingegneria Informatica - Reti, 110/110
Politecnico di Bari 2008 — 2012
Bachelor's degree, Ingegneria delle Telecomunicazioni, 98/110
Politecnico di Torino
Doctor of Philosophy (PhD), Ingegneria informatica
Leonardo Rinaldi
Direttore Produzione at Ancitel SpA
Telecommunications
Education
Politecnico di Torino 1998 — 1999
Master, Telecommunications
Università degli Studi di Lecce 1991 — 1997
Physics, Astrophysics
Scientific High School
Experience
Ancitel S.p.A. July 2015 - Present
CLIOCOM February 2012 - September 2015
CSI Piemonte July 2010 - February 2012
CSI Piemonte May 2006 - June 2010
CSI Piemonte January 2004 - April 2006
CSI Piemonte January 2002 - December 2003
CSI Piemonte June 2000 - December 2001
Skills
Network Design, Start-ups, Start-up, VoIP, Project Management, Business Development, Program Management, Analysis, Budgets, Data Center, Networking, Firewalls, Pre-sales, Team Management, Project management, Security, Enterprise Architecture, IP, VPN
Leonardo Rossi
studente presso Politecnico di Torino
Mechanical or Industrial Engineering
Education
Università di Bologna 2009 — 2012
triennale, Ingegneria gestionale/Gestione industriale, 99
Politecnico di Torino
Experience
Politecnico di Torino October 2012 - March 2015
Skills
Budgets, Negotiation, Microsoft Office, C, Microsoft Excel, Outlook, PowerPoint, Public Speaking, Windows, Microsoft Word, Strategic Planning, Editing, Teaching, English
Leonardo Sasso
Team Leader Transmission Design
Automotive
Education
Politecnico di Torino
Laurea in Ingegneria Aerospaziale
Experience
Vehicle Engineering & Design April 2001 - Present
Leonardo Schiavone
Photographer presso Jazzit!
Photography
Education
Politecnico di Torino
Ingegnere elettrotecnico
Experience
Jazzit! January 2004 - Present
Free Lance 1986 - Present
Radio Flash 1985 - 1986
Skills
Travel Photography, Microsoft Office, Photoshop, Commercial Photography, Architectural..., Portraits, Event Photography, Photography, Fine Art Photography, Graphic Design, Portrait Photography, Digital Photography
Leonardo Solis Vasquez
Estudiante en Politecnico di Torino
Telecommunications
Education
Politecnico di Torino 2010 — 2013
Laurea Magistrale in Ingegneria Elettronica, Ingegneria Elettronica
Technische Universität Darmstadt 2012 — 2012
Erasmus Exchange Student, Electronic Engineering
Universidad Nacional de Ingeniería 2004 — 2009
B.Sc. Electronic Engineering
Experience
Center for Advanced Security Research Darmstadt (CASED) April 2012 - November 2012
INICTEL-UNI September 2008 - August 2010
Skills
ModelSim, Chipscope, C++ Language, ECL, SystemC, Visual Paradigm, C++, C#, VHDL, Matlab, Verilog, Xilinx ISE, IAR Embedded Workbench, Embedded Systems, FPGA prototyping, C
Leonardo Verrastro
IS Business Engagement Manager Commercial Systems at Philip Morris International
Tobacco
Education
École Supérieure d'Électricité 1996 — 1997
Master Degree, Optoelectronics And Communications
Politecnico di Torino 1992 — 1997
Master Degree, Electronic Engineering
Politecnico di Torino 1992 — 1997
Master's Degree, Electrical, Electronics and Communications Engineering, 107/110
Experience
Philip Morris International January 2014 - Present
Philip Morris International August 2013 - December 2013
PT HM Sampoerna Tbk September 2010 - July 2013
Philip Morris International October 2009 - September 2010
Philip Morris International June 2008 - October 2009
Philip Morris March 2007 - May 2008
Philip Morris June 2005 - February 2007
Philip Morris September 2003 - May 2005
Philip Morris September 2000 - August 2003
Philip Morris May 1999 - August 2000
Skills
SAP, ERP, Business Intelligence, Management, Project Management
Leonardo Zecchini
Technical Support Manager at CNH Industrial
Automotive
Education
Politecnico di Torino 1993 — 2001
MSBC, Management Engineering
Liceo Scientifico 1989 — 1993
Certificate, Scientific
Experience
CNH Industrial May 2014 - Present
CNH Industrial August 2013 - April 2014
IVECO Ltd March 2011 - August 2013
IVECO Ltd September 2010 - March 2011
Iveco October 2008 - September 2010
Iveco November 2007 - October 2008
IVECO June 2006 - October 2007
Iveco May 2005 - May 2006
IVECO May 2004 - April 2005
FIAT GRA.DE 2002 - 2004
Skills
Parts, Manufacturing, Target Oriented, Warranty, Automobile, Target Marketing, Product Development, Automotive Aftermarket, Lean Manufacturing, Management, Business Planning, Vehicles, make it happen, Problem Solving, Supply Chain, Negotiation, Automotive, People Management, Continuous Improvement, Engineering, Logistics, Make It Happen, Business Strategy
Leonardo Zuccaro Marchi
PhD Architect Visiting Lecturer TU Delft
Architecture & Planning
Education
Technische Universiteit Delft 2009 — 2013
Doctor of Philosophy (PhD), Architecture
Università IUAV di Venezia 2009 — 2013
Doctor of Philosophy (PhD), Urbanism
CCA - Canadian Centre for Architecture 2011 — 2011
Architecture-Urbanism
Alta Scuola Politecnica 2005 — 2008
Diploma, Innovation management, Architecture
Politecnico di Milano 2005 — 2008
Master of Science (M.Sc.), Architecture, 110 L
Politecnico di Torino 2005 — 2008
Master of Science (M.Sc.), Architecture-Construction, 110 L
Politecnico di Milano 2002 — 2005
Bachelor of Science (B.Sc.), Architecture, 110 L
Cornaro 1997 — 2002
Experience
TU Delft March 2014 - Present
Leonardo Zuccaro Marchi and LAP/Landscape Architecture Praxis January 2009 - Present
KTH Royal Institute of Technology November 2014 - August 2015
Universidad de Monterrey August 2014 - December 2014
Politecnico di Milano March 2009 - July 2011
CZA Cino Zucchi Architetti January 2009 - June 2010
Skills
Architecture, Landscape Architecture, Sustainability, ArchiCAD, Rhino, Residential Design, Urban, Sketching, Concept Design, Urbanism, Urban Planning, Art, Urban Design, Master Planning, Theory, Vray, Rendering, Research, Architectures, 3D visualization, Sustainable Design, Sustainable Architecture, English, Comprehensive Planning, Ecotect, Concept design, Architectural Design, Residential, Urban Theory, Design Research, SketchUp, AutoCAD Architecture
Leopoldo Frati
Senior Advisor presso Sanipedia
Hospital & Health Care
Education
Politecnico di Torino
Electronic Engineer
Experience
KOS GENETIC January 2010 - Present
Sanipedia January 2010 - Present
IMS - Istituto di Management Sanitario October 2009 - Present
IBM January 1976 - September 2009
Lester Daniel Suarez Cabrera
Research Assistant. Mechatronics Lab. Politecnico di Torino
Research
Education
Politecnico di Torino 2007 — 2010
Doctor of Philosophy (Ph.D.), Mechatronics
University of Cienfuegos. Cuba 2003 — 2005
Master's Degree, Applied Mathematics
University “Marta Abreu” of las Villas. Cuba 1997 — 2002
Master's Degree, Automatic Control
Experience
Mechatronics laboratory (LIM). Politecnico di Torino January 2010 - Present
FLAG-MS S.r.l April 2012 - May 2015
Politecnico di Torino January 2007 - December 2009
Faculty of Mechanical Engineering, Universidad de Cienfuegos, Cuba September 2002 - December 2006
Skills
Algorithms, Fluid Dynamics, Labview, Matlab, Control Systems Design, Embedded Systems, Signal Processing, Numerical Simulation, Numerical Analysis, Simulations, Experimentation, Active Magnetic Bearings, C++, Microcontrollers, Mechatronics, Digital Signal..., Electronics, LaTeX, Motor Control, C, Simulink
Letizia Godio
Process Fmeca Trainer
Mechanical or Industrial Engineering
Education
ingegneria aerospaziale, sistemi aerospaziali, meccanica e dinamica del volo
liceo Classico Cavour Torino 1984 — 1989
diploma, francese, storia, filosofia, greco, latino, arte, chimica, biologia, fisica e matematica
Experience
Società pubbliche/private December 2011 - June 2012
Faiveley Transport April 2010 - November 2011
Faiveley Transport September 2008 - March 2010
Faiveley Transport January 2007 - August 2008
Faiveley Transport 2003 - 2008
Sab Wabco SpA October 1999 - November 2002
SaB Wabco SpA October 1998 - September 1999
Politecnico di Torino June 1998 - July 1998
Skills
Poka Yoke, Technical Documentation, Manufacturing, Process Improvement, Troubleshooting, Industrial Safety, Lean Manufacturing, FMECA, Testing, Team Leadership, Assembly, Technology Transfer, Kaizen, AS400
Letizia Maggiore
Dott.ssa in Ingegneria Civile
Civil Engineering
Education
Politecnico di Torino 2013 — 2015
Laurea Magistrale, II livello, Ingegneria ambientale/per la salute ambientale
Politecnico di Torino 2008 — 2013
Laurea I livello, Ingegneria civile
ITG P.L. Nervi 2003 — 2008
Diploma Istituto Tecnico Superiore, Geometra, 70/100
Experience
Golf Smile May 2008 - Present
Associazione Happy Days 2008 - Present
J.E.To.P. March 2015 - Present
J.E.To.P. November 2014 - June 2015
Impresa Nicola Srl April 2012 - August 2012
Studio Tricarico April 2011 - July 2011
Skills
Microsoft Office, ENVI, ArcGIS, Autodesk Software, Graphics, AutoCAD, Adobe Creative Suite
Letizia Martini
Supply Chain and Customer Service Director Italy & Iberia presso Ideal Standard International BVBA
Telecommunications
Education
Politecnico di Torino 1990 — 1996
Laurea, Ingegneria gestionale
Liceo Scientifico 1985 — 1990
Diploma, Liceo scientifico
Experience
Ideal Standard International BVBA January 2015 - Present
Ideal Standard International BVBA January 2013 - January 2015
Vodafone IT May 2012 - January 2013
Vodafone Italia April 2009 - May 2012
TeleTu Italy February 2006 - April 2009
Capgemini Consulting February 2002 - February 2006
Ernst & young consultant 1999 - 2001
Coopers & Lybrand Consulting June 1996 - January 1999
Skills
Customer experience, Program management, Telecommunications..., Assistenza clienti, Team Building, Customer Satisfaction, Change management, Dispositivi mobili, CRM, Change Management, Customer Experience, Call center, Logistics Management, Miglioramento processi, Telecomunicazioni, Process Improvement, Soddisfazione del..., Project Coordination, Call Center, Project planning, Program Management, Project Planning, Project management, Customer Service, Management
Letizia Martini
at Vodafone
Telecommunications
Education
Politecnico di Torino
Experience
Tele2 Responsabile Provisioning DSL ConsumerVodafoneApril 2009 - Present
Letizia Roccamena
Dottoranda presso ENTPE
Architecture & Planning
Education
Politecnico di Torino 2011 — 2014
Master's degree, Ingegneria Edile, 101/110
Universidad del Pais Vasco 2012 — 2013
Master's degree, Ingeniaria en Edificación
Politecnico di Torino 2008 — 2011
Bachelor's degree, Ingegneria Edile
Liceo Classico "Cielo d'Alcamo" 2003 — 2008
Maturità classica, 100/100
Experience
ENTPE January 2015 - Present
École Nationale des Travaux Publics de l'État March 2014 - June 2014
Università degli Studi di Torino September 2013 - November 2013
Skills
Microsoft Excel, TRNSYS Software, Revit, Architectural Design, SketchUp, Urban Planning, Sustainable Design, CAD, AutoCAD, Architecture, Home Automation, Innovative materials, ArchiCAD, Architettura, AutoCAD Architecture, Progettazione..., Progettazione..., Rendering, Sustainability, Domotics, Energy Retrofits
Letizia Ugolini
dealership newspaper advertising
Marketing and Advertising
Education
Politecnico di Torino 1993 — 2000
Bachelor's degree, Architecture and Related Services
Experience
astfaar September 2008 - September 2011
Skills
Furnishings, AutoCAD, Advertising, Sketching, Graphic Design, Furniture, Interior Design
Li Wen Ren
Attended Politecnico di Torino
Education
Politecnico di Torino 2009 — 2013
Liang Hao
Student at Politecnico di Torino
Computer Networking
Education
Politecnico di Torino 2011 — 2014
Master's Degree, Computer and Communication Networks Engineering, 110/110
Harbin Institute of Technology 2007 — 2011
Bachelor's Degree, Computer Science and Technology, 88/100
Experience
Alone January 2014 - March 2014
Politecnico di Torino May 2013 - March 2014
Politecnico di Torino September 2012 - September 2013
Skills
Microsoft Office, MapReduce, Linux, Windows, Subversion, Python, Machine Learning, MySQL, Computer Vision, C, Tomcat, HTML, Qt, C#, Java, Image Processing, Apache 2, Operating Systems, Networking, C++, Oracle, Git, Data Mining
Libero Catalano
CAE manager presso Pininfarina
Mechanical or Industrial Engineering
Education
Università di Pisa / University of Pisa 2008 — 2009
Master in Yacht Engineering, Yacht Engineering
Politecnico di Torino 1989 — 1996
Laurea, Ingegneria Meccanica
Experience
Pininfarina S.p.A. October 2012 - Present
AMET s.r.l. April 2006 - September 2012
Centro Ricerche I.S.D.G. s.c.r.l. January 2006 - April 2006
Altair Engineering 2002 - 2006
Altair Engineering 2001 - 2002
Altair Engineering 2000 - 2001
Altair Engineering 1998 - 2000
Skills
CAE, Project Coordination, CAE Management, Project Planning, International Project...
Libero Dinoi
Research
Education
Politecnico di Torino 1996 — 2002
M.Sc.
Experience
Elettronica SpA March 2006 - Present
ISMB April 2002 - March 2006
Politecnico di Torino September 2005 - November 2005
STMicroelectronics 2001 - 2002
Lichun Wang
Attended Politecnico di Torino
Design
Education
Politecnico di Torino 2010 — 2014
Bachelor's degree, Design and Visual Communications, General
Sichuan International Studies University 2008 — 2010
Bachelor's degree, Italian Language and Literature
Experience
Q.F.A. srl Quattrer Arredamenti 4R May 2014 - July 2014
Lavazza March 2012 - March 2012
Phase motion control Ningbo ltd July 2010 - August 2010
Istituto Piepoli Spa May 2010 - May 2010
Skills
Photoshop, SketchUp, AutoCAD, Blender, Illustrator, Microsoft Office, Rhinoceros, Dialux
Licia Rossetti
Consultant presso Reply
Information Technology and Services
Education
Politecnico di Torino 2012 — 2014
Magistrale Ingegneria Gestionale, Ingegneria gestionale/Gestione industriale, 105
Politecnico di Torino 2009 — 2012
Ingegneria dell'organizzazione d'impresa, Ingegneria gestionale/Gestione industriale, 98/110
ITIS Zuccante 2004 — 2009
Perito Informatico, 90/100
Experience
Reply August 2015 - Present
EY January 2015 - July 2015
Scloby s.r.l. September 2014 - November 2014
Petra S.R.L April 2012 - July 2012
Skills
Microsoft Word, Programming, Microsoft Excel, PowerPoint, Research, Microsoft Office
Lidia Apaza
Student at Politecnico di Torino
Architecture & Planning
Education
Politecnico di Torino 2013 — 2014
Universidad Nacional de San Agustín 2004 — 2009
Bachelor of Architecture (B.Arch.), Architecture
Lidia Giordana
Ricerca e sviluppo prodotti e gestione ufficio tecnico presso Libera professionista
Furniture
Education
Politecnico di Torino 1984 — 1991
Laurea vecchio ordinamento, Architecture
Experience
Libera professionista October 2013 - Present
Nature Company srl July 2012 - September 2013
Moeco srl October 2004 - May 2012
ony-ki snc November 2000 - June 2004
Skills
Space planning, Sales Management, Furniture, Marketing Strategy, Negotiation, Microsoft Office, Product Development, Strategic Planning, Interior Design, Account Management, Retail, New Business Development, Microsoft Excel, Customer Service, Sales
Lidia Icardi
Solar Orbiter Electrical Power System engineer at ESA/ESTEC
Aviation & Aerospace
Education
Politecnico di Torino 2005 — 2008
Master's degree, Electronics Engineering
Politecnico di Torino 2002 — 2005
Degree, Electronics Engineering
Liceo Classico 1997 — 2002
High school graduation, Humanities
Experience
ESA/ESTEC February 2011 - Present
THALES ALENIA SPACE December 2008 - January 2011
Skytechnology SRL September 2008 - November 2008
Politecnico di Torino June 2008 - August 2008
Lidia Rolle
Pianificazione e Controllo presso TecSolis S.p.A.
Renewables & Environment
Education
Sole 24 ore Business School 2014 — 2015
Master executive advance in Project management, Management
Politecnico di Torino 2009 — 2012
Master's degree, Engineering Physics, 110/100 con Lode
Politecnico di Torino 2006 — 2009
Bachelor of Engineering (B.Eng.), Engineering Physics, 110/110
Experience
TecSolis S.p.A. May 2014 - May 2015
TecSolis S.p.A. April 2012 - May 2015
Skills
Thin Films, Physics, Energie rinnovabili, Photovoltaics, Matlab, bandi di gara, Sistema di qualità, GSE, Insegnamento, Solar Energy, Program Management, Energy, Lavoro di squadra, Project management, Energy Efficiency, Solar Cells, C, ENEL, Engineering, Renewable Energy, SOA, TERNA, buone doti relazionali...
Lidia Romeo
Europe Communication Leader at IBM
Information Technology and Services
Education
Politecnico di Torino 1998 — 1999
Master in Multimedial Techologies and Communication, Communication, Internet
Università degli Studi di Palermo 1991 — 1999
foreign languages, Arts Faculty
Liceo Scientifico B. Croce 1986 — 1991
Experience
IBM February 2015 - Present
IBM July 2013 - Present
IBM December 2010 - July 2013
IBM May 2007 - February 2011
Global Value May 2006 - May 2007
Global Value July 2001 - July 2005
GSA February 2000 - June 2001
Skills
Communication, Human Resources, Risk Management, Outsourcing, Project Management, Strategic Communications, English, Program Management, Marketing
Lihua Xiao
Drilling Fluid Specialist at eni E&P division
Oil & Energy
Education
Politecnico di Torino 1993 — 1996
Doctor of Philosophy (PhD), Mining and Mineral Engineering, PhD
Experience
eni - E&P division January 1990 - Present
Liliana Corvino
Business Analyst at Accenture
Management Consulting
Education
ESCP Europe 2013 — 2014
Master in Business Management
Politecnico di Torino 2009 — 2011
Engineering Master's Degree, 110/110
Universidad Politécnica de Madrid 2010 — 2011
LLP Erasmus
Politecnico di Torino 2006 — 2009
Engineering Bachelor's Degree, 107/110
Experience
Reply September 2014 - August 2015
Gestalten June 2014 - July 2014
L'Oréal September 2013 - February 2014
CSTB May 2012 - May 2013
Engineering private practice Albino Corvino December 2011 - April 2012
Cauberg-Huygen Raadgevende Ingenieurs BV August 2011 - November 2011
Liliana Franzese
Studente presso Politecnico di Torino
Education
Università degli Studi di Salerno 2011 — 2015
Laurea triennale, Ingegneria gestionale/Gestione industriale, 98
Politecnico di Torino
Laurea Magistrale LM, Ingegneria gestionale/Gestione industriale
Skills
AutoCAD, Microsoft Office, Microsoft Windows, Ingegneria, Microsoft Excel, Engineering, Project planning, Management, Microsoft Word, Business plan, Lingua inglese
Liliana Ramírez Mesa
Energiereferentin en IWR Institut
Mechanical or Industrial Engineering
Education
Politecnico di Torino 2010 — 2010
Erasmus Mobility Program
Universidad de Sevilla
Ingeniería Técnica en Diseño Industrial
Experience
IWR Institut March 2014 - Present
Green Space 2011 - 2012
Skills
AutoCAD, C (programación), Relaciones..., SolidWorks, CATIA, Energía solar, Microsoft Office, Energías renovables, Ingeniería
Liliana Rodriguez
Freelance Architect
Architecture & Planning
Education
Architectural Association School 2009 — 2010
Master of Science (MSc), Sustainable Environmental Design
Politecnico di Torino 2008 — 2008
Exchange programme
Instituto Tecnológico de Monterrey 2004 — 2009
Bachelor of Arts (BA), Architecture
Experience
Freelancer September 2012 - Present
Flender Architekten July 2011 - July 2013
Oficina de Arquitectura en Inovacción Inteligente en Diseño (ODA) August 2008 - September 2009
Skills
AutoCAD, Architectural Design, Concept Design, Architectures, Submittals, Architectural Drawings, Rendering, Photoshop, Sustainability, Comprehensive Planning, LEED, Mixed-use, Ecotect, InDesign, Vray, Rhino, Sustainable Design, Space Planning, BIM, AutoCAD Architecture, ArchiCAD, Construction Drawings, SketchUp, Revit, Adobe Creative Suite, Design Research, Model Making, Urban Design, 3D Studio Max, Interior Design, Sustainable Architecture, 3D Visualization, Residential Design, Architecture, Microstation
Liliana Torre
Consulente Altran presso THALES ALENIA SPACE
Aviation & Aerospace
Education
Politecnico di Torino 2008 — 2011
laurea magistrale, Ingegneria Aerospaziale
Experience
THALES ALENIA SPACE January 2012 - Present
Skills
Aerospaziale, Testing, Simulazioni, Matlab, Microsoft Office, Ingegneria dei sistemi, Simulink, Ingegneria, Sistemi spaziali
Liliana Wang
Ingegnere Elettronica
Research
Education
Politecnico di Torino 2010 — 2012
Master's degree, Electrical and Electronics Engineering
Politecnico di Torino 2007 — 2010
Bachelor's degree, Information Technology, 110/110
Tongji University 2006 — 2010
Bachelor's degree, Information Technology, 110/110
Experience
Politecnico di Torino 2010 - 2012
Skills
Italian languages, Student Organizations, Musical Instruments, English language skills
Lin Gu
Software Development Engineer at Amadeus
Computer & Network Security
Education
Ecole nationale supérieure des Télécommunications / ENST Paris 2012 — 2014
Engineer's degree, Communication System Security, 3.96/4
Institut Eurécom 2012 — 2014
Engineer's degree, Communication System Security
Politecnico di Torino 2011 — 2014
Master of Science (M.Sc.), Computer and Communication Networks Engineering
Politecnico di Torino 2008 — 2011
Bachelor of Science (BSc), Telecommunications Engineering, 110L/110
Air Force Engineering University 2000 — 2004
Bachelor's degree, Missle and Radar Engeering, Top 1%
Experience
ALTEN September 2014 - Present
Amadeus IT Group September 2014 - Present
Sytel Reply July 2014 - September 2014
Alcatel-Lucent July 2013 - January 2014
EURECOM May 2013 - July 2013
EURECOM May 2013 - July 2013
ISMB April 2011 - July 2011
Air Force of China September 2004 - February 2005
Skills
Distributed Algorithms, Unix Shell Scripting, Python, HBase, Networking, Linux Module Programming, Military Experience, Linux Kernel Programming, C++, Cloud Computing, Image Processing, Restlet, Hadoop, Content Centric..., Security, Mercurial, Shell Scripting, Java, Git, C, Linux, Agile Methodologies, Zookeeper, Telecommunications, Electronics, Labview, Matlab, Windows, Network Security, Linux Socket Programming, Antennas, VMware VTSP, Scrum, HTML 5, Radar, Linux Kernel
Lin Leon
Student at Politecnico di Torino
Education
Politecnico di Torino 2011 — 2013
Linda Bianco
Engineering Consultant presso Akka Technologies
Education
Politecnico di Torino 2011 — 2013
Laurea Magistrale, Ingegneria Biomedica (Bioingegneria Elettronica e Informatica), 106/110
Politecnico di Torino 2008 — 2011
Laurea di primo livello, Ingegneria Biomedica, 105/110
Liceo Scientifico Statale ''F.Vercelli'' 2003 — 2008
Maturità scientifca, 100/100
Experience
Akka Technologies April 2014 - Present
Politecnico di Torino March 2013 - December 2013
Azienda Ospedaliero-Universitaria San Giovanni Battista di Torino (Molinette) May 2011 - June 2011
Linda Damiani
Visual merchandiser presso H&M
Research
Education
Politecnico di Torino 2007 — 2012
Laurea, Architettura - Disegno Industriale
Istituto professionale Albe Steiner 2004 — 2006
Diploma, Grafica Pubblicitaria
C.I.P. Franco Balbis 2001 — 2004
diploma, Disegnatore Pubblicitario, Grafica
Experience
H&M September 2015 - Present
MANGO April 2015 - August 2015
Mango October 2014 - April 2015
PROMOD May 2014 - September 2014
Università degli Studi di Torino November 2012 - April 2014
Politecnico di Torino 2007 - 2012
ZAAF desig August 2011 - September 2011
CTM computer to magic June 2004 - September 2004
Skills
Adobe Illustrator, Vray, Solidworks, Moda, Lingua inglese, Progettazione di..., Social media, Photoshop, Rendering, Rhino, Disegno industriale, 3D Studio Max, Pubblicità, InDesign, Microsoft Office, Blender, Adobe Creative Suite, Industrial Design, AutoCAD, Product Design, CAD, Graphic Design, Rhino 3D, Rhinoceros, Fotografia, Grafica, Progettazione grafica, Illustrator
Linda Jäger
PhD Student at ETH Dept. of Organic Chemistry
Research
Education
Harvard Medical School 2009 — 2009
Proteomics
Massachusetts Institute of Technology 2008 — 2009
Molecular biology, Biophysics
KTH Royal Institute of Technology 2006 — 2009
MSEng, Biological engineering, MSc, Chemistry
Politecnico di Torino 2007 — 2007
Biomaterials
Università degli Studi di Siena 2007 — 2007
Italian
KTH Royal Institute of Technology 2003 — 2006
BSc, Chemistry
Experience
ETH Dept. of Organic Chemistry March 2011 - Present
Children's Hospital Boston November 2009 - October 2010
MIT June 2008 - October 2009
Skills
Cell Biology, Proteomics, Enzyme Kinetics, Scientific Writing, Protein Expression, Evolutionary Biology, Cell Culture, Biophysics, Lifesciences, Life Sciences, Molecular Evolution, Molecular Biology, Analytical Chemistry, Biochemistry, Protein Chemistry, Organic Chemistry, Chemistry
Linda Piccini
Construction Engineer
Design
Education
2007 — 2009
Laurea II livello, Ecodesign
Experience
Italdesign Giugiaro May 2015 - Present
Proyecto - Idg July 2013 - April 2015
Bertone R&D February 2013 - July 2013
Proyecto - IDG October 2011 - January 2013
Amet srl February 2004 - October 2011
Skills
Disegno industriale, Photoshop, Progettazione di..., Progettazione grafica, InDesign, Adobe Illustrator, Industria..., Ingegneria, CATIA
Linda Regina
Quality and Lean Engineer at Luxottica Group
Apparel & Fashion
Education
Politecnico di Torino
Ingegneria Logistica e Produzione
Experience
Luxottica Group Spa September 2007 - Present
Valeo March 2007 - July 2007
Skills
TPM, Produzione snella, Cintura verde, Manifattura, Continuous improvement, 5S, Kaizen, Sviluppo di prodotto
Linda Senatore
HSE e Facility manager
Renewables & Environment
Education
Politecnico di Torino 2003 — 2009
Laurea specialistica in Ingegneria edile, Politecnico di Torino
Politecnico di Torino 2003 — 2009
Laurea specialistica in ingegneria edile, ingegneria edile
Experience
MECAPLAST Group April 2015 - Present
ARES Srl - società di ingegneria e consulenza October 2011 - April 2015
Studio O. Siniscalco October 2010 - October 2011
SEA engineering June 2010 - October 2010
Skills
sicurezza e salute dei...
Lino Gabriel Da Silva De Abreu
MSc. Mechanical Engineer
Industrial Automation
Education
Politecnico di Torino 2012 — 2014
Master's Degree, Mechanical Engineering, MSc. in Mechanical Engineering
Universidad Simón Bolívar 2008 — 2014
Engineer’s Degree, Mechanical Engineering, Mechanical Engineer
Skills
Leadership, Microsoft Office, HEC-RAS, Project Engineering, EPANET, MathCAD, MSC Adams, Teamwork, SolidWorks, AutoCAD, Siemens NX, Microsoft Word, Matlab, PowerPoint, Simulink
Lino Scelsi
Senior R&D Process Engineer, TravelArtist
Consumer Goods
Education
University of Cambridge 2006 — 2009
PhD, Chemical Engineering
Politecnico di Torino
MEng & BEng, Chemical Engineering, 110 cum Laude - early graduation
Liceo Scientifico
100/100
Experience
Procter & Gamble July 2014 - Present
Bicycling against oil wars September 2012 - Present
Procter and Gamble December 2010 - June 2014
University of Sheffield October 2009 - December 2010
University of Cambridge February 2009 - July 2009
Skills
COMSOL, Process Engineering, R&D, Plastics Recycling, Composites, Simulations, Engineering, Chemistry, Manufacturing, Fluid Mechanics, Polymers, Polymer Science, Multiphase Flow, Rheology, Chemical Engineering, Modeling, Materials Science, Process Simulation, Plastics
Lino Scelsi
Researcher at University of Cambridge
Plastics
Education
University of Cambridge 2006 — 2009
PhD, Chemical Engineering
Politecnico di Torino 2003 — 2005
MEng, Chemical Engineering
Politecnico di Torino 2000 — 2003
BEng, Process Engineering
Experience
University of Cambridge January 2006 - Present
HysyTech June 2005 - October 2005