Politecnico di Torino, Torino
The Politecnico di Torino is one of the most important universities in Europe for engineering and architecture studies, strongly committed to collaboration with industry. Politecnico is a research university that participates at the highest levels of international scientific research. Research activities, are structured in four macro-areas: Industrial Engineering; Information Technology; Management and Mathematical Engineering; Civil, Environmental, Architecture and Design Engineering.
The new campus hosts the Business Research Center that provides partners with office space and laboratories for innovation and technology transfer.
The new campus hosts the Business Research Center that provides partners with office space and laboratories for innovation and technology transfer.
Politecnico di Torino Alumni
Giovanni Catanzaro
Libero professionista
Renewables & Environment
Education
Università di Catania 2004 — 2005
Master in ICT (Information and Communication Technology)
Politecnico di Torino 1997 — 2003
Ingegneria Elettronica
Liceo Scientifico "A. Manzoni" di Mistretta 1992 — 1997
Experience
TMR Srl 2007 - November 2013
Regulus S.r.l. December 2006 - July 2007
Giovanni Catanzaro
Technical responsible at TMR SERVIZI srl
Computer & Network Security
Education
Politecnico di Torino
Giovanni Ceresa
Business Development at Ceresa S.p.A. Energy & Facility
Oil & Energy
Education
Politecnico di Torino 2002 — 2007
Master's Degree, Business Engineering
Experience
Ceresa S.p.A. - Energy & Facility November 2011 - Present
Deloitte February 2008 - November 2011
Skills
Business Valuation, Management, Valuation, Due Diligence, Management Consulting, Financial Modeling, Corporate Finance, Private Equity, Financial Analysis
Giovanni Ciraso
Professionista nel settore Ingegneria civile
Civil Engineering
Education
Politecnico di Torino 2000 — 2007
Laureato in Ingegneria Edile presso il Politecnico di Torino, Specializzazione in Estimo Civile e Valutazione del Mercato Immobiliare
Ordine degli Ingegneri della Prov. di Cuneo 2012 — 2012
Corso sulla Sicurezza nei Cantieri Edili (aggiornamento)
Ordine degli Ingegneri della Prov. di Cuneo 2011 — 2011
Mediatore delle Controversie nel Campo Immobiliare
Politecnico di Torino
Corso sulla Sicurezza nei Cantieri Edili
Associazione Nazionale Amministratori Condominiali ed Immobiliari di Cuneo 2007 — 2008
Corso dell'ANACI sull'Amministrazione Condominiale ed Immobiliare
Liceo Scientifico G.B. Bodoni - Saluzzo (CN) 1994 — 1999
Maturità Scientifica
Experience
Lavoratore autonomo 2007 - Present
MGM Informatica - Saluzzo (CN) September 2005 - March 2006
I.A.L. Saluzzo 2005 - 2006
Punto Wind - Saluzzo July 2000 - June 2001
Skills
Real Estate Financing, Real Estate, International Real..., Gestione delle..., Construction Drawings, Construction Safety, Construction..., Business Administration, Real Estate Economics, Business plan, Construction Management, Corporate Real Estate, Commercial Real Estate, Real Estate Transactions, Real Estate Marketing, Construction Engineering, Business Planning, Real Estate Development, Edilizia, Construction, Condos, Real Estate License
Giovanni Cirelli
Education
Politecnico di Torino 2011 — 2014
Laurea Magistrale LM, Ingegneria Gestionale
Università di Catania 2007 — 2011
Laurea triennale, Ingegneria Gestionale
Experience
Gruppo SCAI, Consulenza Aziendale Informatica May 2015 - Present
Gruppo SCAI, Consulenza Aziendale Informatica October 2014 - April 2015
Skills
RapidMiner, Stata, MS Project, Microsoft Excel, PowerPoint, SQL, Toad, Microsoft Office, Pianificazione,..., Visio, MySQL, Tabelle pivot di MS..., Business Intelligence, Microsoft Word
Giovanni Cocco
Software Engineer at Inpeco
Information Technology and Services
Education
Politecnico di Torino 2002 — 2005
Laurea Triennale
Experience
Inpeco April 2014 - Present
Gestioni Elettroniche February 2013 - March 2014
Xorovo 2012 - 2012
Entando s.r.l. 2009 - 2012
Agiletec 2007 - 2009
Skills
Software Design, JDBC, Business Process Design, JUnit, JSF, JSP, JavaScript, Test Driven Development, Web Applications, bpm, XML, Java Enterprise Edition, MVC, Apache, Subversion, NetBeans, Git, MySQL, JSON, Spring Framework, Servlets, JBoss Application Server, Eclipse, PostgreSQL, J2EE, Hibernate, Struts, Open Source, Tomcat, Linux, Spring, Maven, PHP, OOP, UML, SQL, REST, Java, Ant, Design Patterns, CSS
Giovanni Coccìa
Team leader
Industrial Automation
Education
Politecnico di Torino 1996 — 2002
Master degree, Eletrical engineer
Institut national polytechnique de Grenoble 1999 — 2000
Gradué en Ingénierie (bac. + 4), Electrical Engineering
Majorana 1991 — 1996
Diploma, Liceo scientifico
Experience
FATA HUNTER 2011 - Present
FATA HUNTER 2008 - 2010
FATA HUNTER April 2004 - 2008
AI Engineering S.r.l. 2002 - 2004
Skills
PLC, Software Development, Team Leadership, Manufacturing, Programming, Project management, MS Project, Instrumentation, Microsoft Office, Electrical Engineering, C++, Electricians, Process Control, Problem Solving, Project Engineering, Negotiation, Commissioning, Labview, Automation, Control Systems Design, Engineering, English, Product Development, Project Planning, Integration, Project Management
Giovanni Colangelo
Engine Platform Quality Manager presso FCA Fiat Chrysler Automobiles
Automotive
Education
Politecnico di Torino 1997 — 2004
Engineer's degree, Mechanical Engineering
Experience
FCA Fiat Chrysler Automobiles March 2015 - Present
Eaton Corporation August 2011 - February 2015
UMECO September 2009 - August 2011
TRW May 2004 - September 2009
Skills
Engineering, Quality Management, APQP, Value Stream Mapping, DMAIC, PPAP, SPC, TS16949, Iso 9000, Supplier Quality, ISO, Six Sigma, Kaizen, Quality System, Lean Manufacturing, 5S, FMEA, Continuous Improvement, Root Cause Analysis, Manufacturing
Giovanni Colomba
Amministratore/Presidente presso H.S. Automazioni s.r.l.
Industrial Automation
Education
Politecnico di Torino 1987 — 1989
Istituto tecnico Peano - Torino 1985 — 1987
Perito elettronico industriale
Experience
H.S. Automazioni s.r.l. September 1997 - Present
Skills
Costruzione e..., Studio e sviluppo..., Sviluppo sistemi di..., Sviluppo software su..., Analisi funzionali dei..., Studio e analisi..., Progettazione elettrica..., Sviluppo software su..., Costruzione..., Sviluppo sistemi scada...
Giovanni Colombo
Technical Leader Industrial Engine at FPT Industrial
Automotive
Education
University of Illinois at Chicago 2001 — 2003
Master of Science, Engineering
Politecnico di Torino 1998 — 2003
Master of Science (MS), Mechanical engineering
Experience
FPT Industrial February 2012 - Present
Fiat Powertrain Technologies March 2007 - February 2012
Fiat Powertrain Technologies August 2006 - February 2007
GM Powertrain Europe May 2005 - July 2006
Skills
APQP, Automotive, Factory, Project Management, Automotive Engineering, Industrial Engineering, PPAP, Diesel Engine, 5S, Lean Manufacturing, Powertrain, Testing, FMEA, Vehicles, Electronics
Giovanni Colonna
Intern at Italdesign Giugiaro
Mechanical or Industrial Engineering
Education
Politecnico di Torino 2012 — 2015
Master’s Degree, Aerospace, Aeronautical and Astronautical Engineering, 95
Politecnico di Torino 2008 — 2012
Bachelor’s Degree, Aerospace, Aeronautical and Astronautical Engineering, 93
Maricentadd 2011 — 2011
Gas Turbines
Liceo Classico L.De Samuele Cagnazzi 2003 — 2008
High School, Classical Studies, 94
Experience
Italdesign Giugiaro September 2015 - Present
Politecnico di Torino April 2015 - August 2015
RMIT University October 2014 - February 2015
Skills
Windows 7, Travel Planning, Gas Turbines, Patran, LaTeX, C++ Language, Solidworks, Catia, SolidWorks, Microsoft Office, Matlab
Giovanni Colucci
partner at KPMG Advisory
Management Consulting
Education
Politecnico di Torino 1984 — 1990
Laurea, Ingegneria
Liceo Classico B. Marzolla, Brindisi 1979 — 1984
Diploma, Maturità classica
Experience
KPMG Advisory, Roma November 1995 - Present
Andersen Consulting, Torino September 1990 - October 1995
Giovanni Colucci
Team Member at Atomix Software
Information Technology and Services
Education
Politecnico di Torino 2013 — 2016
Master's degree, Computer Engineering
Politecnico di Torino 2008 — 2013
Bachelor's Degree, Computer Engineering
ITIS "Luigi dell'Erba" 2003 — 2008
Perito Informatico
Experience
Atomix Software 2008 - Present
Pascarosa September 2013 - December 2013
OGGETTI SMARRITI June 2012 - April 2013
Dfood July 2011 - March 2012
TKTConsulting srl October 2008 - March 2009
NatiFortuNati SpA November 2007 - September 2008
Skills
XML, C#, jQuery, AngularJS, Blogging, Android Development, JavaScript, Agile Methodologies, SQL, Java, C++, C, PHP, Node.js, CSS, Software Development
Giovanni Conca
Studente presso Politecnico di Torino
Architecture & Planning
Education
Politecnico di Torino 2013 — 2015
Laurea magistrale, Pianificazione territoriale, urbanistica e paesaggistico-ambientale
Università degli Studi di Genova 2009 — 2013
laurea, Tecniche per la pianificazione urbanistica, territoriale e ambientale
Experience
Politecnico di Torino September 2013 - Present
Comune di Camogli November 2012 - February 2013
Skills
Quantum GIS, Territory Planner, Photoshop, AutoCAD, GeoMedia Professional, GRASS GIS, Microsoft Office, Illustrator, SketchUp
Giovanni Contardi
Sales Manager at Sicme Motori
Electrical/Electronic Manufacturing
Education
Politecnico di Torino 2000 — 2007
Mechanical Engineer 105/110, Engineering
GIUSEPPE OMAR
GIUSEPPE OMAR
Experience
Sicme Motori 2013 - Present
ABB SpA Italy 2008 - 2012
Fiat Spa July 2007 - August 2008
Skills
Electric Motors, Cost, Customer Oriented, Sales Management, Bid Preparation, Business Development, B2B Marketing Strategy, Business Development..., Problem Solving, Hazardous Areas, AC Drives, ATEX, Commercial Orientation, Purchasing Processes, Motion Controllers, Budgeting, Strategic Thinking, T&C, Business Strategy
Giovanni Coppola
Insegnante presso I.I.S. Giulio Natta
Higher Education
Education
Politecnico di Torino 1982 — 1990
Ingegneria meccanica
Experience
I.I.S. Giulio Natta September 1999 - Present
ITIS Ferrari Torino September 1999 - August 2005
Giovanni Cordaro
Independent Information Technology and Services Professional
Information Technology and Services
Education
Politecnico di Torino
Giovanni Corsi
Senior electronic engineer at Magneti Marelli S.p.A. Electronic Systems and Powertrain
Electrical/Electronic Manufacturing
Education
Politecnico di Torino 1992 — 1999
110/110, Electronics
Experience
Magneti Marelli S.p.A. - Electronic Systems and Powertrain July 2010 - Present
Alenia Aeronautica June 2009 - June 2010
Motorola Mobile Devices July 2008 - December 2008
Urmet Domus April 2002 - July 2008
CRF April 2001 - March 2002
Skills
Firmware, Hardware Architecture, Power Electronics, Microcontrollers, Electronics, FPGA, Analog, Hardware, Power Management, VHDL, Simulations, ASIC, PCB Design, Testing
Giovanni Corvaglia
Master Thesis presso Porsche Engineering Services GmbH
Mechanical or Industrial Engineering
Education
Politecnico di Torino 2013 — 2015
Master of Science, Mechanical Engineering
Università degli Studi di Lecce 2008 — 2012
Bachelor's degree, Ingegneria industriale, 110/110 con lode
Experience
Porsche Engineering Services GmbH April 2015 - Present
Politecnico di Torino March 2013 - Present
Porsche Engineering Services GmbH October 2014 - March 2015
Politecnico di Torino ( Dipartimento di energetica) March 2014 - June 2014
Università del Salento 2008 - 2012
Skills
Systems Modeling, Vibration Control, Catia, Simulink, Powertrain, Ingegneria..., Data Analysis, Automotive Engineering, Fluidodinamica..., Finite Element Analysis, CATIA, Microsoft Office, CFD, Internal Combustion..., Signal Processing, Thermodynamics, Matlab, Control Systems Design, Fluid Power, Termodinamica
Giovanni Cremonesi
Titolare presso Studio Tecnico Cremonesi
Construction
Education
Politecnico di Torino
Ingegnere Civile Edile
Experience
Studio Tecnico Cremonesi January 1989 - Present
Skills
Microsoft Word, Business plan, Trattative, Pianificazione..., Project management, Strategia d'impresa, Microsoft Office, Edilizia residenziale,..., Microsoft Excel, Assistenza clienti
Giovanni Cucinotta
Studente presso Politecnico di Milano
Civil Engineering
Education
Scuola Master F.lli Pesenti-Politecnico di Milano 2014 — 2015
Master universitario di II livello, “Edifici e infrastrutture sostenibili”
Politecnico di Torino 2011 — 2014
Laurea magistrale, Ingegneria Civile delle infrastrutture e dei sistemi di trasporto - Ordinamento 270
Università degli Studi di Messina 2007 — 2011
Laurea Triennale, Ingegneria Civile – Ordinamento 509
Politecnico di Milano – Scuola Master F.lli Pesenti
Superamento esame per Tecnici Certificatori Energetici CENED
Università degli studi di Messina
Abilitazione all'esercizio della professione di Ingegnere Civile
Skills
CAD, Ingegneria strutturale, Project management, Ingegneria, Structural Engineering, Microsoft Word, AutoCAD, Strade, Photoshop, Microsoft Office, Ingegneria civile, PowerPoint, Microsoft Excel, Edilizia, Matlab, Lingua inglese
Giovanni Cuomo
Logistic Engineer Intern at Eni
Civil Engineering
Education
Politecnico di Torino 2014 — 2015
Second Level Specializing Master program, Petroleum Engineering and Operations
University of Naples “Federico II” 2011 — 2013
Master's degree in Structural and Geotechnical Engineering, 110/110 summa cum laude
University of Naples “Federico II” 2007 — 2011
Bachelor's degree in Civil Engineering, 110/110 summa cum laude
Experience
Eni July 2015 - Present
MILEA Costruzioni S.r.l. 2012 - September 2014
Tun Abdul Razak Research Centre (TARRC) January 2013 - July 2013
Skills
Foundation Design, Slope Stability, AutoCAD, Deep Foundations, SAP2000, Structural Analysis, Engineering Geology, Geotechnical Engineering, Seismic Design, Soil, Earthquake Engineering, Earthworks, Geotechnics, Logistics, Retaining Walls, Civil Engineering
Giovanni D'Aloia
Software Engineer presso Fiat Spa
Automotive
Education
Politecnico di Torino
Experience
Fiat Spa January 2000 - Present
ACTIA ITALIA January 2000 - Present
Diagnosi Automotive 1999 - Present
Skills
Lean Manufacturing, Continuous Improvement, Product Development, Manufacturing, Vehicles, FMEA, Automobile, Engineering, Automotive, Automotive Engineering
Giovanni D'Aprile
Partner at Blue Reply
Information Technology and Services
Education
Politecnico di Torino 1991 — 1997
University, Electronic engineering
Experience
Blue Reply March 2012 - Present
Skills
Requirements Analysis, Web Services, Business Process, Software Project..., IT Strategy, Java Enterprise Edition, Business Intelligence, Project Management, SOA, Pre-sales, Team Management, Project management, Solution Architecture, EAI, Cloud Computing, Software Development, Enterprise Architecture, Microsoft SQL Server, Integration
Giovanni Dalmasso
PHD Student at German Cancer Research Center DKFZ / BioQuant
Research
Education
German Cancer Research Center - DKFZ 2014 — 2016
Doctor of Philosophy (PhD), Lysosomal System Biology
ETH Zürich
Master Thesis, Computational Science & Engineering
Politecnico di Torino
Master of Science, Mathematical Engineering
Politecnico di Torino
Bachelor of Science, Mathematics for Engineering Sciences
Experience
German Cancer Research Center - DKFZ May 2014 - Present
Helmholtz Centre for Environmental Research - UFZ May 2012 - May 2014
ETH, Zurich March 2012 - April 2012
Liceo Scientifico Statale G. B. Bodoni October 2011 - October 2011
ETH, Zurich February 2011 - September 2011
Politecnico di Torino February 2010 - July 2010
Liceo Scientifico Statale G. Peano June 2009 - July 2009
Liceo Classico e Scientifico Statale G. Arimondi September 2000 - June 2001
Skills
C, Parallel Computing, Applied Mathematics, Windows 7, COMSOL, C++, Simulations, Rhinoceros, Matlab, Fluent, Windows XP Professional, LaTeX, Simulation, Mac OS X, Windows, Biomechanics, Python, TBB, ANSYS, CFD, Fortran, Numerical Analysis, Algorithms, Gromacs, Lusas, Microsoft Office, Mathematica, Teaching, Programming, Bash, NetLogo, Mimics, Photoshop, Eclipse
Giovanni Davide Giaquinta
Plant Manager at SORIN GROUP Italia S.r.l. Saluggia CRM facility Cardiac Rhythm Management BU
Medical Devices
Education
Politecnico di Torino 1989 — 1996
Mechanical engineer
Politecnico di Torino 1989 — 1996
Mechanical engineer
Experience
Sorin Group Italia - CRM facility November 2012 - Present
Sorin Group June 2008 - October 2012
Skills
Design for Manufacturing, Cardiac Rithm Management, Cardiovascular Devices, Process Engineering, Heart Valves, Mechanical Engineering, Plant Management, Design Research, Manufacturing Segment...
Giovanni De Bernardi
Education
Politecnico di Torino 1974 — 1980
Doctor in nuclear engeneering
Experience
Goglio SpA 2000 - 2005
Goglio S.p.A. 2000 - 2005
Giovanni De Franceschi
Dessinateur du bâtiment architecte
Architecture & Planning
Education
Politecnico di Torino 2008 — 2010
Laurea Specialistica in Architettura, Laurea specialistica in Architettura (classe 4/S Architettura e Ingegneria Edile), 110/110 e menzione d'onore sul sito della facoltà
Politecnico di Torino 2004 — 2008
Laurea in Architettura per il Progetto, Laurea in Architettura per il Progetto (Classe 4 Scienze dell'Architettua e dell'Ingegneria Edile)
ISITCG di Aosta per geometri 1999 — 2004
Diploma di Istruzione Tecnica e Commerciale per Geometri
Experience
Buro5 Namur April 2013 - Present
Architetto February 2013 - Present
Skills
InDesign, Sustainable Design, Vectorworks, Interior Design, SketchUp, Progettazione..., Microsoft Office, Architectural Drawings, 3D Studio Max, Architecture, Urban Design, Architectural Design, AutoCAD, Revit, AutoCAD Architecture, English, Illustrator, Photoshop
Giovanni De Luca
Project Engineer at Gruppo Dimensione S.p.a
Mechanical or Industrial Engineering
Education
Politecnico di Torino 2010 — 2012
Master's degree, Mechanical Engineering
Politecnico di Torino 2004 — 2010
Bachelor's degree, Mechanical Engineering
Experience
Gruppo Dimensione spa June 2013 - Present
GF Aspirazioni s.a.s December 2012 - May 2013
ACTA s.r.l October 2011 - November 2012
DENSO Manufacturing Italia S.p.A. October 2007 - July 2008
Skills
MS Project, Microsoft Office, English, Mechanical Engineering, HVAC, Construction, Project Planning, AutoCAD
Giovanni De Pasquale
Sales Rep AFCRM presso St. Jude Medical
Medical Devices
Education
Politecnico di Torino 2007 — 2009
laurea specialistica, Ingegneria Biomedica
Università Politecnica delle Marche 2003 — 2007
Laurea triennale, Ingegneria Biomedica
Experience
St. Jude Medical January 2014 - Present
St. Jude Medical January 2013 - December 2013
St. Jude Medical September 2009 - December 2012
Skills
Minitab, Cross-functional Team..., Quality System, Design of Experiments, Validation, Capital Equipment, Medical Devices, Six Sigma, FMEA, Product Development, Product Launch, FDA, Solidworks, Biomedical Engineering, R&D, Design for Manufacturing
Giovanni De Stefano
Scrum Master at Touring Assurances / Touring Verzekeringen (TATV)
Information Technology and Services
Education
Académie de Musique
Académie de Musique
Académie de Musique
Académie de Musique
Politecnico di Torino 1998 — 2004
Master, Telecommunications Engineer, 102/110
Politecnico di Torino 2006 — 2008
Bachelor, IT Engineer, 110/110
Experience
Touring Assurances / Touring Verzekeringen (TATV) July 2015 - Present
ServiSoft August 2011 - Present
Tech Mahindra February 2015 - June 2015
Belgacom August 2011 - December 2014
Vodafone Group Services GmbH April 2009 - July 2011
Vodafone Group Services GmbH September 2007 - March 2009
Vodafone IT May 2007 - August 2007
TVBLOB July 2005 - April 2007
Skills
Wicket, Team Leadership, Agile Methodologies, Team Building, Enterprise Architecture, TDD, UML, JPA, Hibernate, Certified Scrum Master..., Groovy, Solution Architecture, Apache Camel, Weblogic, Agile Project Management, jQuery, Integration, Maven, Telecommunications, Software Solution..., Software Project..., Oracle, Continuous Integration, Agile, Business Analysis, Software Design, Sun Certified Java..., Testing, JMS, Grails, People Skills, JUnit, Scrum, Search, Test Driven Development, JavaScript, JSP, SOAP, SQL, Ant, Spring, Design Patterns, Tomcat, JBoss Application Server, Solr, Software Engineering, SOA, Java Enterprise Edition, Java, Subversion
Giovanni De Vecchi
Core Network Engineer
Telecommunications
Education
Politecnico di Torino 2007 — 2010
Ingegneria, Telecomunicazioni
Experience
Spindox Spa June 2010 - Present
Vodafone 2013 - 2014
Centro Ricerche Fiat July 2009 - January 2010
Skills
Software Development, 3G, Signaling Protocols, Wireshark, Diameter, Network Engineering, Core Network, GSM, Java, LTE, C, C++ Language
Giovanni Della Vella
at Energy Solution spa
Renewables & Environment
Education
Università di Bologna 2009 — 2010
Master, Ingegneria nucleare
Politecnico di Torino 1981 — 1986
laurea, Ingegneria elettronica
Experience
Energy Solution spa 2012 - Present
NHOE 2009 - 2011
Ericsson Telecomunicazioni spa 2006 - 2009
Bosch Telecom 1999 - 2000
Italtel 1994 - 1999
Skills
Managed Services, Team Leadership, IP, Pre-sales, Contract Negotiation, Business Development, Wireless, Broadband, Team Management, Sales Management, Start-ups, New Business Development, Telecommunications, Program Management, VoIP
Giovanni Di Camillo
Studente presso Politecnico di Torino
Mechanical or Industrial Engineering
Education
2007 — 2012
università di l'aquila
Skills
Ingegneria, Matlab, Gestione vendite, Microsoft Excel, Project management
Giovanni Di Giacinto
Ingegnere presso Eaton EMEA
Industrial Automation
Education
Politecnico di Torino 2002 — 2015
Ingegnere elettrico, Ingegneria elettrica
Experience
Eaton EMEA March 2014 - Present
Cellino Group November 2013 - February 2014
Gammastamp spa June 2013 - October 2013
BP March 2005 - May 2013
Gruppo Di Viesto August 2001 - February 2005
Skills
Manifattura, Elettrotecnica, Ingegneria dei progetti, Ingegneria, Continuous improvement, Produzione snella, Logistica, Commissioning, PLC, Sviluppo di prodotto
Giovanni Di Renzo
Studente presso Politecnico di Torino
Education
Politecnico di Torino 2013 — 2016
Giovanni Di Rienzo
Vascular Product Specialist at BSI
Medical Devices
Education
Politecnico di Torino 1995 — 2000
BS, Mechanical Engineering
Experience
BSI June 2009 - Present
Fresenius Medical Care February 2006 - May 2009
Sorin Group 2000 - January 2006
Skills
Validation, CAPA, CE marking, Medical Device Product..., V&V, Design Control, ISO 13485, Quality Auditing, Regulatory Affairs, ISO, Medical Devices, Quality Assurance, Quality Management, R&D
Giovanni Di Stefano
Product Portfolio Manager presso Comau
Industrial Automation
Education
ESCP Europe 2015 — 2015
Problem Solving & Decision Making, Finanza e servizi di gestione finanziaria, N.A.
Politecnico di Torino 2012 — 2014
Corso di Master Universitario di 2° livello-CMU2, Ingegneria, N.A.
Università degli Studi di Roma Tre 2009 — 2011
Master Degree, Electronic Engineering for Industry and Development - Curriculum: Power Electronics, 110/110 cum Laude
Università degli Studi di Roma Tre 2006 — 2009
Bachelor Degree, Electronic Engineering - Curriculum: General, 110/110 cum Laude
Experience
Comau April 2015 - Present
Comau January 2014 - April 2015
Comau January 2012 - January 2014
ENEVOL July 2011 - December 2011
Skills
Energy, Artificial Neural..., Project planning, Industria..., Ingegneria, Microsoft Office, Renewable Energy, Robotics, Solar, Matlab, AutoCAD, Fuel Cells, Problem solving, Produzione snella, Automation, Project management, Photovoltaics, Performance Measurement, Manifattura
Giovanni Distefano
R&D Director Production Manager
Sporting Goods
Education
Politecnico di Torino 1986 — 1992
laurea, Ingegneria elettronica
Experience
Mares SpA November 1998 - Present
Galber Ase May 1994 - November 1998
Skills
Embedded Systems, Engineering, Team Leadership, Project Management, Strategic Planning, Electronics, Start-ups, Product Development, Product Management, Team Management, Management, Manufacturing
Giovanni Ercolano
Software Engineer presso deltatre s.p.a.
Information Technology and Services
Education
Politecnico di Torino 2004 — 2009
Bachelor's degree, Ingegneria Informatica, 110/110
ITIS E.Majorana 1999 — 2004
Diploma, Perito Informatico, 100/100
Experience
deltatre s.p.a. May 2013 - Present
SPEA September 2012 - May 2013
SPEA August 2004 - September 2012
Blue Assistance August 2004 - August 2004
Contacta Spa July 2003 - April 2004
Skills
Electronics, LINQ, Git, TFS, MVC, Boundary Scan, Software Development, .NET, XAML, Multithreaded..., Visual Basic 5.0/6.0, Borland C++ Builder, Scrum, MVVM, WinForms, WPF, Microsoft Office, Matrox MIL, Software Project..., Team Leadership, Entity Framework, OOP, CVS, Win32 API, BSDL, C++, GigE Cameras, XML, C#, Cognex, Visual Basic, OCR, Image Processing, Machine Vision, Team Learning, Agile Methodologies, SQL, Visual Studio
Giovanni Fabio Di Graziano
Consultant at Altran Italia S.p.A.
Automotive
Education
Politecnico di Torino 2008 — 2011
Master's degree, Electronics Engineering
Università degli Studi di Palermo 2002 — 2007
Bachelor's degree, Electronics Engineering
Experience
Altran Italia S.p.A. October 2011 - Present
Skills
Python, CANalyzer, XML, Microsoft Office, HEXE, INCA, winUDS
Giovanni Fabio Di Graziano
Dottore Magistrale in Ingegneria Elettronica
Information Technology and Services
Education
Politecnico di Torino 2008 — 2011
Laurea Specialistica in Ingegneria Elettronica
Experience
C.R.E.S July 2007 - October 2007
Giovanni Fassio
Associate at The Boston Consulting Group
Insurance
Education
Politecnico di Torino 2011 — 2014
Master's Degree, Management Engineering, 110/110 cum Laude
RWTH Aachen 2013 — 2014
GPA 1.5/5
Fondazione CRT 2014 — 2014
Talenti per l'impresa, Innovation, Management and Entrepreneurship
Alta Scuola Politecnica 2011 — 2013
Diploma of Alta Scuola Politecnica
Politecnico di Torino 2008 — 2011
Bachelor's degree, Supply Chain and Logistic Engineering, Management Engineering, 110/110 cum Laude
Experience
The Boston Consulting Group November 2014 - Present
FCA Fiat Chrysler Automobiles January 2014 - November 2014
Tubosider April 2011 - September 2011
Giovanni Fassio
Studente presso Politecnico di Torino
Education
2008 — 2013
Giovanni Favasuli Foti
Consultant at Reply
Telecommunications
Education
Politecnico di Torino 2011 — 2013
Electronic Engineering, Wireless System Design, Master Degree
Università degli Studi 'Mediterranea' di Reggio Calabria 2007 — 2011
Bachelor of Engineering (BEng), Electronic Engineering
Experience
Reply September 2014 - Present
RTM SpA February 2014 - August 2014
Telecom Italia Lab March 2013 - September 2013
Skills
C++ Language, Wireless Broadband, Programming, Software Defined Radio, Communication Systems, Optical Fiber, VHDL, LTE, Telecommunications, Antennas, Electronic Engineering
Giovanni Ferlisi
Maintenance Manager at cnh
Machinery
Education
Politecnico di Torino 1993 — 2000
Master's degree, Mechanical Engineering
Liceo Massimo D'Azeglio 1989 — 1993
Humanities/Humanistic Studies
pilz
pilz
Experience
CNH Industrial June 2015 - Present
CNH Industrial May 2015 - Present
New Holland CE - CNH - Fiat Industrial May 2011 - Present
New Holland CE - CNH - Fiat Industrial February 2014 - January 2015
SAET May 2009 - May 2011
COMAU May 2001 - June 2007
Skills
Maintenance Management, Facilities Management, CAD, Automotive, 5S, Manufacturing, Automation, Equipment Installation, Preventive Maintenance, Budgeting, Lean Manufacturing, Continuous Improvement, Safety Management..., Industrial Safety, Energy Management, Machinery Repair, Engineering, FMEA
Giovanni Ferri
Studente presso Politecnico di Torino
Mechanical or Industrial Engineering
Education
Politecnico di Torino 2009 — 2013
Ingegneria chimica
Giovanni Filomeno
Mechanical Designer presso Anpil Pay 2.0
Mechanical or Industrial Engineering
Education
Technische Universität München 2015 — 2017
Master's degree, Computational Mechanics
Collegio Universitario Renato Einaudi 2012 — 2015
Politecnico di Torino 2012 — 2015
Bachelor's degree, Mechanical Engineering
Tongji University, Shanghai, China 2013 — 2014
Bachelor's Degree, Mechanical and Production Engineering
Università degli Studi di Bari 2011 — 2012
Progetto Lauree Scientifiche, Fisica
Liceo Scientifico 2007 — 2012
Diploma di maturità scientifica, 100/100
Experience
Croce Rossa Italiana September 2012 - Present
Anpil Pay 2.0 March 2015 - June 2015
Cantene s.r.l. December 2014 - June 2015
Tesmec S.p.A. July 2014 - October 2014
Osservatorio Astronomico Sirio May 2012 - September 2012
Croce Rossa Italiana November 2011 - September 2012
Skills
Pack Office, CodeBlocks, AutoCAD, Mechanical Engineering, Observational Astronomy, Computer Numerical..., Emergency Medicine, Computer Language, First Aid
Giovanni Fiori
Coordinatore service presso Welcome srl
Retail
Education
A. Avogadro di Torino 1990 — 1995
Perito capotecnico in elettrotecnica industriale, 50/60
Politecnico di Torino
Experience
Welcome Srl batterie industriali e gruppi di continuita' September 2014 - Present
Gruppo Movincar February 2002 - August 2014
Skills
Management, Trattative, Microsoft Office, Assistenza clienti, Microsoft Excel, Project management, Pianificazione..., Vendite, Project planning, Continuous improvement
Giovanni Foti
Altran Italia S.p.A. Consultant
Telecommunications
Education
Politecnico di Torino 2006 — 2010
Telecommunications Engineering, Telecommunications Engineering, 101/110
Università degli Studi 'Mediterranea' di Reggio Calabria 2001 — 2006
Telecommunications Engineering, Telecommunications Engineering, 100/110
ITIS A. Panella di Reggio Calabria 1996 — 2001
Electronic and Telecommunication Expert, Electronic, Telecommunications, Physics, Maths, 82/100
Experience
Vodafone November 2012 - Present
Altran Italia S.p.A. November 2012 - Present
Wind September 2012 - October 2012
Assembly Data System September 2012 - October 2012
Aizoon July 2011 - August 2012
Ericsson January 2011 - March 2012
SOGETEL srl January 2011 - April 2011
Retis S.p.A August 2010 - December 2010
Huawei August 2010 - December 2010
Wind August 2010 - December 2010
Skills
Linux, Hardware Testing, Systems Monitoring, Traffic Generation, Integration, Troubleshooting, Network Engineering, IP, Traffic Analysis, Performance Testing, Project management, SDH, Technical Documentation, VHDL, Ericsson, Wireline, Interoperability, Stesura di budget, Routers, Cabling, Alarm Management, DSLAM, Project planning, Shell Scripting, DHCP, DWDM, Network Provisioning, Huawei, Installation, Load Testing, Ingegneria gestionale, Fault Management, Technical Coordination, ATM, Pianificazione,..., Stress Testing, Manual Testing, Telecommunications, DSL, Validation, TCP, Wireshark, Microsoft Office, Switches, Windows, Ingegneria delle..., Ethernet, Engineering design, Management, Test Automation
Giovanni Francesco Laporta
Studente presso Politecnico di Torino
Mechanical or Industrial Engineering
Education
Politecnico di Torino 2013 — 2015
Laurea Magistrale LM, Ingegneria meccanica
Università degli Studi di Parma 2009 — 2013
Laurea triennale, Ingegneria meccanica, 104
Skills
CAD, Ricerca, Matlab, Analisi agli elementi..., SolidWorks, Dimensionamento..., Ingegneria meccanica, C++, C, Simulink, Ingegneria, AutoCAD, Programmazione, Simulazioni
Giovanni Francesco Sorace
OTTTV services and Digital Video Expert Experienced Executive (Senior Manager) at Accenture Consulting
Broadcast Media
Education
Politecnico di Torino 1997 — 2002
Ingegneria Informatica, Engineering
University of Illinois at Chicago 2000 — 2001
Master of Science in Electrical and Computer Engineering, Engineering
Experience
Accenture February 2003 - Present
Skills
DRM, Android, IPTV, Digital TV, VOD, Mobile Devices, Program Management, Media & Entertainment, Broadcasting Industry, Broadcast, Video, Over The Top TV, Broadcast Television, Broadband, Content Delivery, Project management, Digital Video, Digital Transformation, Business Process, Digital Media, Program management, Content Management, Management Consulting, Digital media, Project Management, Streaming Media
Giovanni Fresia
Tecnical Support Manager presso Fiat Group
Consumer Goods
Education
Politecnico di Torino 1979 — 1984
laurea, Ingegneria Meccanica
Experience
Fiat Group Automobile January 2013 - Present
FIAT Group Automobile June 2009 - December 2012
Fiat France January 2007 - May 2009
Fiat Group January 2005 - December 2006
Fiat Group March 2002 - December 2004
Fiat Group September 2000 - March 2002
Fiat Group August 1996 - September 2000
Fiat Group November 1994 - August 1996
Fiat Group October 1987 - November 1989
Fiat Group R&D Innovazione Architettura Veicolo 1985 - 1987
Skills
Automotive Product..., Automotive Aftermarket, Automotive Repair, Automotive Product..., Product Management, Process Quality..., Quality Assurance..., Automotive Engineering, Process Engineering
Giovanni Gallardo
Advanced Engineering Responsible at IVECO
Mechanical or Industrial Engineering
Education
Politecnico di Torino 1977 — 1981
Experience
IVECO New Product Development, logisticSNIA SpASeptember 1986 - September 1996
Skills
Logistics, Simulations, Project Planning, Supply Chain Management, Engineering
Giovanni Galli
Analog FAE at Avnet Memec
Semiconductors
Education
Politecnico di Torino 1983 — 1993
Master of Science (MS), electronics
itis guglielmo marconi
Experience
Avnet Memec July 2012 - Present
austriamicrosystems April 2010 - June 2012
Infineon Technologies October 2006 - December 2009
IRF Semiconductor April 2000 - September 2006
STMicroelectronics April 1994 - April 2000
Skills
LDO, Power Electronics, Circuit Design, Power Management, CMOS, Semiconductors, Analog Design, High Voltage, Sales, DC-DC, Business Development, Debugging, Product Development, ASIC, Integrated Circuit..., IC, Analog Circuit Design, Analog, Power Supplies
Giovanni Gangemi
Petrophysicist at Eni
Oil & Energy
Education
Politecnico di Torino 2013 — 2014
Master of Engineering (MEng), Petroleum engineering and operations, 23/30
Università degli Studi di Roma Tre 2011 — 2013
Master of Science (MSc), Geology of the resources (oil & gas), 108/110
University of Leeds 2012 — 2012
Exchange Msc student, Reservoir Architectures, 65/90
Università degli Studi di Messina 2006 — 2010
Bachelor's degree on Geology, Petrography, 110 cum laude/110
Experience
Eni April 2015 - Present
Eni March 2015 - Present
Eni July 2014 - October 2014
Eni April 2013 - July 2013
Skills
Geological Mapping, Reservoir Management, Geology, Sequence Stratigraphy, Petroleum Engineering, Reservoir Engineering, Drilling, Petroleum, Exploration Geologists, Reservoir Modeling, Basin Modeling, 3D seismic..., ArcGIS analyst, Earth Science, Geophysics, Petroleum Geology, Petrel, Petrophysics
Giovanni Garaldi Biasi
Intern at FEV América Latina
Mechanical or Industrial Engineering
Education
Politecnico di Torino 2013 — 2015
Master of Engineering (MEng), Mechanical Engineering
Universidade de São Paulo 2010 — 2015
Bachelor of Engineering (BEng), Mechanical Engineering
Colegio Dante Alighieri 1997 — 2009
Experience
FEV América Latina August 2015 - Present
FEV Italia S.r.l March 2015 - July 2015
Numerical Offshore Tank (TPN) April 2012 - August 2013
Universidade de São Paulo March 2011 - March 2012
Insitituto de Pesquisas Tecnológicas July 2008 - December 2008
Skills
Finite Element Analysis, CFD, Emissions Control, Microsoft Office, Matlab, Automotive Engineering, Internal Combustion..., Star-CCM+, AutoCAD, Solidworks, English, Microsoft Word, Engineering, Fluid Dynamics, PowerPoint, Uniplot, Portuguese, Java, Simulations
Giovanni Gardin
architetto
Architecture & Planning
Education
Politecnico di Torino
Experience
Self-employed October 2010 - Present
CBS Architetti Associati October 2010 - Present
Skills
AutoCAD, Progettazione...
Giovanni Gariglio
Senior Interior Designer presso Fiat Professional
Design
Education
Politecnico di Torino 1980 — 1987
Laurea in Architettura, 105\110
Experience
Fiat Professional January 2011 - Present
Fiat auto Spa January 2010 - December 2010
Alfa Romeo May 1998 - December 2009
IED Istituto Europeo di Design October 1993 - July 1998
Fiat Auto SPA September 1989 - May 1998
Giovanni Gariglio
Sales Manager presso Johnson Electric Asti
Automotive
Education
Politecnico di Torino 1985 — 1991
MS Mechanical Engineer, Physics / Mathematics / General and Applied Chemistry / Technical designing methologies / Mechanical, 110/110
Experience
Johnson Electric Asti January 2001 - Present
Johnson Electric Engineering Germany January 1999 - December 2000
Bruel snc December 1995 - January 1999
Bitron Spa Climate Control Business Unit December 1992 - December 1995
Skills
Microsoft Word, Microsoft Office, Leadership, Vendite, Management, Microsoft Excel, PowerPoint, Ricerca, Formazione, Lingua inglese
Giovanni Gasco
Architetto libero professionista, 3D Visualiser
Architecture & Planning
Education
SGI Studio - Autodesk Training Centre (private training institute) 2011 — 2012
Master specialistico in Virtual Architecture, 3D Modeler, 3D Graphic
Politecnico di Torino 2009 — 2011
Degree in Architecture and building engineering -4/S-, Architecture, 105/110
Politecnico di Torino 2006 — 2009
Laurea di classe 4 - Scienza e ingegneria edilizia, Architecture, 108/110
Liceo Scientifico P.N.I. 2001 — 2006
Diplomato
Experience
NoReal - 3D Agency April 2015 - Present
Architetto libero professionista March 2014 - Present
InRender - Accademia Italiana di Computer Grafica November 2012 - Present
Technical Office May 2012 - November 2012
Consortium of Architecture firms March 2012 - May 2012
Cipriani Antonio S.R.L. March 2011 - April 2011
Comune di Finale Ligure February 2009 - March 2009
Skills
3D visualization, Illustrator, Adobe Premiere, 3DS Max, Microsoft Office, 3D Printing, BIM, 3D rendering, Revit, Render, Premiere, Panotour, Autopanogiga, SketchUp, Architettura, Mental Ray, 3D Architectural..., AutoCAD, Modellazione 3D, Designs, Visualizzazione 3D, 3D Studio Max, Adobe Illustrator, Vray, 3D modeling software, Nuke, Autodesk, Architecture, Rhinoceros, 3D, Showcase, 3D Modeling, Concept Design, Photoshop
Giovanni Gaudio
Ingegnere presso EGEA Ente Gestione Energia e Ambiente
Civil Engineering
Education
Politecnico di Torino 2014 — 2015
Master di secondo livello in "Ingegneria dell'acqua per uso potabile, civile e industriale"
Politecnico di Bari 2010 — 2013
Master's degree, Ingegneria per l'Ambiente e il Territorio, 106/110
Politecnico di Bari 2006 — 2010
Bachelor's degree, Ingegneria Ambientale e del Territorio, 103/110
Experience
EGEA - Ente Gestione Energia e Ambiente May 2015 - Present
KU Leuven April 2013 - July 2013
Skills
Trattamento delle acque..., Impianti idraulici, Energie rinnovabili, Microsoft Office, Microsoft Word, Geology, GIS, Environmental..., Management, Sustainable Engineering, Geotechnical Engineering, Lavoro di squadra, Ingegneria civile, Trattamento delle acque, AutoCAD, Ingegneria ambientale, Rete fognaria, Microsoft Excel, PowerPoint, Engineering, Ingegneria, Transportation..., Progettazione di..., Sostenibilità, Analisi, Hydraulics, ArcGIS, Edilizia
Giovanni Germano
Ingegnere meccanico
Mechanical or Industrial Engineering
Education
ingegnere, meccanica
Experience
n.d. February 2008 - Present
Cellino srl January 2007 - January 2008
Cellino srl April 2002 - December 2006
FRAP January 2000 - March 2002
Skills
Product Development, Kaizen, Prototyping, FMEA, PPAP, Project Planning, Research & Development, Automation Software..., AutoCAD, Quality Assurance, Industrial Automation, Mechatronics, Continuous Improvement, Supplier Quality, Problem solving, Industrial Process..., Engineering, Microsoft Office, Lean Manufacturing
Giovanni Giannandrea
MSc Ingegneria informatica
Computer Networking
Education
Politecnico di Torino
Master's degree, Ingegneria informatica
Università degli Studi di Siena
Bachelor's degree, Ingegneria informatica
Skills
VMware, Embedded Systems, C, Python, Qt Creator, Java, UART, C++, OSGi, LaTeX, OpenCV, Visual Studio, HTML 5, MySQLi, Windows, Wireshark, UML, Socket Programming, Xcode, Oracle PL/SQL..., Eclipse, PyQt, Bash, Arduino, Dreamweaver, VirtualBox, ATMega, Mac OS, JavaScript, Linux, Matlab, PHP, Premiere, Photoshop, I2C
Giovanni Giannotti
Project Director
Construction
Education
Politecnico di Torino
Master's Degree, Mechanical Engineering
Universitat Politècnica de Catalunya
Universitat Politècnica de València (UPV)
Experience
Benetton Group November 2010 - Present
Fudes Design & Construction July 2010 - October 2010
Busi Impianti SpA March 2003 - June 2010
HEP August 2002 - February 2003
Skills
ANSYS, Research, Microsoft Project, Sysnoise, Photoshop, Management, Training, AutoCAD, Microsoft Office, Leadership
Giovanni Gianuario
CPO Engineering Manager
Mechanical or Industrial Engineering
Education
Politecnico di Torino 1988 — 1994
Engineer's degree, Aerospace, Aeronautical and Astronautical Engineering, 95
DNV Knowledge Institute 2002 — 2002
Internal Quality Auditor, Quality System ISO9001:2000, Certificated
Experience
CNH INDUSTRIAL SPA June 2014 - Present
CNH Italy SpA September 2012 - Present
CNH Italy SpA July 2011 - September 2012
CNH Industrial February 2006 - March 2011
Tecumseh Products Company July 2002 - January 2006
De' Longhi January 2000 - June 2002
Skills
Six Sigma, Kaizen, FMEA, PPAP, Mechanical Engineering, TPM, Manufacturing, Leadership, Lean Manufacturing, Kanban, SPC, Engineering, Manufacturing..., Automotive Engineering, Reliability Engineering, Root Cause Analysis, TQM, Cross-functional Team..., Automotive, Quality Auditing, APQP, ISO, R&D, Finite Element Analysis, Process Engineering, Product Development, Project Engineering, Value Stream Mapping, 5S, Supply Management, DMAIC, Quality Assurance, Testing, Team Building, Continuous Improvement, Quality Management, Engineering Management, Quality System, Quality Control, Supplier Quality, GD&T
Giovanni Gianuario
Q&R Specialist presso New Holland CE CNH Fiat Industrial
Machinery
Education
1988 — 1994
Ingegneria Aeronautica, Aerodinamica/Fluidodinamica e Strutture
Diploma 1983 — 1988
Perito Costruttore Aeronautico, Aeronautico
Experience
New Holland CE - CNH - Fiat Industrial July 2011 - Present
Tecumseh Europe SPA March 2002 - January 2006
Tecumseh Europa S.p.A. 2001 - 2006
Ariagel SPA March 2000 - March 2002
Skills
Quality Auditing, Hydraulic Systems, Quality Management
Giovanni Giarola
Senior Sales Manager at GE Energy Management
Oil & Energy
Education
Politecnico di Torino 1993 — 2001
Master's Degree, Electrical and Electronics Engineering
ITC Cavour 1988 — 1993
Experience
GE Energy Management July 2011 - Present
Ilmed Impianti srl September 2010 - July 2011
Pietro Fiorentini SpA January 2006 - October 2010
Microsystems srl February 2004 - December 2005
Corning 2000 - 2001
Skills
New Business Development, Integration, Channel Account..., Sales Management, Product Development, Business Development, Cross-functional Team..., Manufacturing, Leadership, Product Management, Service Delivery, Team Management, Management, Team Building, Sales, Project management, International Sales, Project Management, Smart Metering, SCADA, New business development, GIS
Giovanni Giorcelli
ICT Team Leader Global Engineering Support at CNH Industrial
Automotive
Education
Esame di Stato Ingegneria 1997 — 1997
Politecnico di Torino
Laurea, Mechanical
Experience
CNH Industrial January 2013 - Present
Giovanni Giovannetti
Head of GIS and Security Division presso NHOE
Aviation & Aerospace
Education
Politecnico di Torino
Master of Science (MSc), Ingegneria aerospaziale, aeronautica e astronautica
Experience
NHOE April 2013 - Present
NATO Communications and Information Agency (NCIAgency) April 2012 - April 2013
EUFOR Mission Althea August 2007 - March 2012
NATO C3 Agency June 2005 - July 2007
Provincia di Livorno April 2004 - June 2005
Omaelba S.R.L. February 2003 - June 2005
Ministero della Difesa October 1992 - January 2003
Skills
GIS, ArcGIS Server, Geography, Cartography, Spatial Databases, ArcSDE, Remote Sensing, ArcGIS, Geomatics, Data Management, ERDAS Imagine, Spatial Analysis, GPS, Google Earth, ESRI
Giovanni Giuffre
HW Design Engineer
Electrical/Electronic Manufacturing
Education
Politecnico di Torino 2007 — 2010
Master's degree, Electronic Engineering, 110/110 with honour
Università degli Studi di Messina 2004 — 2007
Bachelor's degree, Electrical and Electronics Engineering
Experience
Magneti Marelli September 2010 - Present
University of California, Irvine September 2009 - March 2010
Skills
Electronics, Hardware Development, Microsoft Excel, Visual Basic, Simulazioni, Microsoft Word, Simulations, Analog Circuit Design
Giovanni Giuliano
DIRIGENTE presso FUTURA 90' S.R.L. CONSOLIDAMENTI E FONDAZIONI SPECIALIINGEGNERIA GEOTECNICA Fino a ottobre 2013
Construction
Education
Politecnico di Torino 1982 — 1998
LAUREA, INGEGNERIA CIVILE - SEZIONE EDILE - STRUTTURISTA GEOTECNICO
Experience
FUTURA 90' S.R.L. - CONSOLIDAMENTI E FONDAZIONI SPECIALI-INGEGNERIA GEOTECNICA DIRETTORE FONDAZIONI SPECIALI E CONDOLIDAMENTIEUROPEA92 92 SPAJanuary 2015 - Present
opere per il sottosuolo srl April 2014 - August 2014