Politecnico di Torino, Torino
The Politecnico di Torino is one of the most important universities in Europe for engineering and architecture studies, strongly committed to collaboration with industry. Politecnico is a research university that participates at the highest levels of international scientific research. Research activities, are structured in four macro-areas: Industrial Engineering; Information Technology; Management and Mathematical Engineering; Civil, Environmental, Architecture and Design Engineering.
The new campus hosts the Business Research Center that provides partners with office space and laboratories for innovation and technology transfer.
The new campus hosts the Business Research Center that provides partners with office space and laboratories for innovation and technology transfer.
Politecnico di Torino Alumni
Francesco Buono
Progettista junior presso Ital engineering
Automotive
Education
Politecnico di Torino 2004 — 2015
ing meccanica, Ingegneria industriale
Casa di Carità Arte e Mestieri 2013 — 2014
Diploma Tecnico CAD, 93
Experience
Ital engineering October 2014 - Present
Etp Spa April 2014 - May 2014
Bbf snc 2009 - 2009
Bbf snc 2009 - 2009
Skills
CATIA, Microsoft Office, Automotive, Strategic Planning, Continuous Improvement, Process Improvement, Vehicles, Manufacturing, Team Building, Sales Management, Project Management, Product Development, Microsoft Excel, Negotiation, New Business Development, CAD, Engineering
Francesco Burgio
Studente presso Politecnico di Torino
Telecommunications
Education
Politecnico di Torino 2010 — 2014
Laurea Magistrale, Ingegneria delle telecomunicazioni
Università degli Studi di Palermo 2006 — 2010
Bachelor's degree, Ingegneria delle telecomunicazioni
Skills
Antennas, Networking, Information Technology
Francesco C. Pesce, PhD
Senior Technology System Engineer at General Motors Powertrain Europe
Research
Education
Politecnico di Torino 2007 — 2009
Doctorate in Energetics, Fluid Power Machines
Politecnico di Torino 2004 — 2006
110/110 cum laude, Master degree in Mechanical Engineering, Automotive specialization
Politecnico di Torino 2001 — 2004
110/110 cum laude, Degree in Mechanical Engineering, Automotive specialization
Liceo Scientifico 1996 — 2001
100/100
Experience
General Motors April 2011 - Present
Centro Ricerche Fiat April 2010 - March 2011
Politecnico di Torino January 2010 - May 2010
Politecnico di Torino January 2007 - December 2009
Fiat Auto May 2004 - October 2004
Skills
Combustion Analysis, Combustion, STAR-CD, Star-CCM+, Internal Combustion..., Calibration, ETAS INCA, Mechanical Engineering, Simulations, Powertrain, Testing, Six Sigma, AMESim, Matlab, CFD
Francesco CONVERTI
responsabile ufficio tecnico presso S.A.F.srl
Industrial Automation
Education
Politecnico di Torino 1965 — 1971
laurea, ingegneria elettrotecnica
Experience
S.A.F.srl January 1986 - Present
GSA_gruppo ENI January 1985 - December 1985
italimpianti April 1974 - December 1984
Skills
progettista sistemi di..., progettista sistemi..., progettista di sistemi...
Francesco Cagliero
President France and South Europe Eaton Electrical Cooper Safety business
Electrical/Electronic Manufacturing
Education
Scuola di Direzione Aziendale L. Bocconi (Milano) 1996 — 1996
Master of Business Administration (MBA)
Politecnico di Torino 1987 — 1993
Electronic engineering
Scientific High Scool 1982 — 1987
Diploma
Experience
Eaton August 2009 - Present
ELKRON SpA 2008 - 2009
Bitron Video s.r.l. - Urmet Group 2006 - 2009
Urmet Domus 2005 - 2006
Urmet France 1999 - 2005
Urmet Domus 1997 - 1999
Urmet Domus 1996 - 1997
Urmet Domus 1994 - 1996
Telecom Italia Lab 1993 - 1994
Skills
Sales & Marketing, Acquisition Integration, Electrical Industry, Restructuring, General management, New business development, Vendite internazionali, Gestione team..., Full P&L Responsibility, International..., Management
Francesco Cagliero
CEO at Bitron Video
Electrical/Electronic Manufacturing
Education
Politecnico di Torino 1987 — 1993
Francesco Cagnazzo
presso
Civil Engineering
Education
Politecnico di Torino 1999 — 2009
Facoltà dell'Informazione
Experience
BentleySoa Spa June 2012 - Present
LA BUROCRATICA sas January 2011 - Present
C.S.I. ITALIA snc March 2010 - Present
Studio Tecnico Serino October 2007 - March 2010
Skills
Project planning, Microsoft Excel, Project management, CAD, Edilizia, Assistenza clienti, Microsoft Word, AutoCAD, Ingegneria, Microsoft Office, Ingegneria civile
Francesco Calandra
Student at Politecnico di Torino
Investment Management
Education
Politecnico di Torino 2013 — 2016
Master's degree, Engineering&Management, Ongoing (Avg. GPA: 2.86 out of 4)
Università degli Studi di Palermo 2009 — 2013
Bachelor's degree, Ingegneria Gestionale, GPA: 2.96 out of 4
Skills
Microsoft Project, PowerPoint, Microsoft Word, Management, Marketing management, Microsoft Excel, Microsoft Access, Microsoft Outlook, Strategic management, SPSS, Microsoft Office, Product development, Visio, Project management
Francesco Caldarola
Project Manager at P.M.&E. S.r.L..
Civil Engineering
Education
Politecnico di Torino 1994 — 2002
Experience
P.M.&E. S.r.L.. May 2008 - Present
ABVS progetti March 2003 - April 2008
Skills
Sustainability, Project Engineering, AutoCAD, Renewable Energy, Project Coordination, Contract Management, Engineering, Environmental Awareness, Water Resources, Water, Construction Management, Environmental..., Construction, Geotechnical Engineering, Drainage, Civil Engineering, Project Planning
Francesco Caldarola
Independent Environmental Services Professional
Environmental Services
Education
Politecnico di Torino 1994 — 2002
Francesco Calleri
Responsabile Tecnico C/o Società importazione e commercio cereali
Wholesale
Education
Politecnico di Torino 1998 — 2004
Laurea in ingegneria meccanica, Politecnico di Torino, 104/110
Experience
Società importazione e commercio cereali March 2007 - Present
Merlo S.p.A. March 2005 - February 2007
Skills
French, Trattative, Microsoft Excel, English, Automotive, Supply Chain Management, Project Management, Business Planning, Negotiation, Purchasing, Microsoft Office, Logistics, Logistica, Sales Management, Product Development, Supply Chain, Business plan
Francesco Calo'
Studente presso Politecnico di Torino
Civil Engineering
Education
Politecnico di Torino 2014 — 2017
Master's degree, Structural engineering
Politecnico di Torino 2011 — 2015
Bachelor's degree, Ingegneria civile
Skills
Microsoft Office, LaTeX, Problem solving, LUSAS, GIS, GNSS, AutoCAD, Matlab
Francesco Calosso
Dottorando presso Politecnico di Torino
Mechanical or Industrial Engineering
Education
Politecnico di Torino 2006 — 2007
laurea magistrale, Ingegneria meccanica
2003 — 2006
Laurea, Ingegneria meccanica
Experience
Politecnico di Torino January 2011 - Present
Politecnico di Torino January 2008 - December 2010
Skills
Inventor, Materials Science, AutoCAD Mechanical, Microsoft Office
Francesco Calò
Software Engineer at Objectway
Information Technology and Services
Education
Politecnico di Torino 1988 — 1996
Ingegnere Elettronico, Ottica quantistica
Experience
Gruppo Objectway Spa 2001 - Present
Skills
OOP, SQL Server, XML, SAS, Visual Basic, SAS Base, JavaScript, .NET, Problem Solving, Web Services, Windows, Analysis, Software Engineering, Web Development, Joomla, Testing, C++, ASP.NET, MySQL, HTML, Databases, Team Leadership, Visual Studio, Software Development, UML, C#, Integration, PHP, Servizi Web, CSS, Server Microsoft SQL, Design Patterns, VB.NET, SQL
Francesco Campi
Internship at P2 Architetti office presso P2ARCHITETTI
Architecture & Planning
Education
Politecnico di Torino 2011 — 2013
Master's degree, Architectur of Soustainable Design, 110/110 and publication on web
Politecnico di Torino 2008 — 2012
Bachelor's degree, Architecture of Design, 102/110
Experience
P2ARCHITETTI June 2015 - Present
Freelance January 2014 - Present
City of Saluzzo November 2014 - May 2015
Bisset Adams March 2013 - July 2013
Skills
AutoCAD Architecture, BestClass, Urban Planning, AutoCAD, Sustainable Architecture, Interior Design, Architecture, InDesign, Artlantis Studio, Photoshop
Francesco Canepa
architetto presso Dimensione
Construction
Education
Politecnico di Torino
Laurea Magistrale Architettura
Experience
Dimensione October 2009 - Present
HENN Architekten September 2007 - October 2009
Francesco Canfora
Information Security Compliance & Governance
Banking
Education
Politecnico di Torino
Master's Degree, Electrical, Electronics and Communications Engineering
Liceo Scientifico Ettore Majorana - Torino
Experience
Intesa Sanpaolo May 2006 - Present
Sanpaolo IMI January 2004 - April 2006
Sanpaolo IMI January 2000 - December 2003
Sanpaolo IMI September 1998 - December 1999
Istituto Bancario Sanpaolo di Torino November 1996 - October 1998
Skills
Information Technology, Disaster Recovery, Network Security, Governance, Security Audits, Information Security, Risk Assessment, IT Management, Vulnerability Assessment, Security, ISO 27001, PCI DSS, Security Certification, IT Strategy, IT Audit, Information Security..., Project Management, Firewalls
Francesco Cannalire
Architetto
Architecture & Planning
Education
Politecnico di Bari 2010 — 2011
Master II livello, Ingegneria della Sicurezza
Politecnico di Torino 2007 — 2009
Laurea magistrale, Architettura
Politecnico di Torino 2002 — 2007
laurea triennale, architettura
Experience
Gruppo di progettazione indipendente September 2009 - Present
Comando provinciale Vigili del Fuoco, Bari February 2012 - April 2012
Politecnico di Torino November 2009 - March 2011
Skills
3D rendering, 3D Studio Max, ArchiCAD, Ecotect, AutoCAD, Urban Planning, Vray, Rendering, SketchUp, Interior Design, Urban Design, Architectural Design
Francesco Cannarile
Studente presso Politecnico di Torino
Automotive
Education
2005 — 2011
Francesco Cannata
Aviation & Aerospace
Education
Politecnico di Torino 1989 — 1995
Francesco Cannata
IT at Consult Data
Human Resources
Education
Politecnico di Torino 2003 — 2010
Engineering
8 marzo
Experience
Consult Data May 2001 - Present
C & M April 2001 - May 2001
C.C.I.A.A. June 1998 - July 1998
Skills
Linux, Management, Microsoft Excel, Microsoft Office, Teamwork, Change Management, Java, ERP, SQL, JavaScript
Francesco Canonico
Studente del Politecnico di Torino Ingegneria Biomedica
Education
Liceo Classico 2003 — 2008
100/100
Università degli Studi di Firenze 2009 — 2014
Laurea triennale, INGEGNERIA ELETTRONICA E DELLE TELECOMUNICAZIONI, 94/110
Politecnico di Torino 2014 — 2017
Laurea Magistrale, INGEGNERIA BIOMEDICA
Francesco Canuto
IT Manager at Consorzio Terin
Information Technology and Services
Education
Politecnico di Torino 1979 — 1984
Ingegneria Elettronica
Experience
Terin April 1987 - Present
Eta Inform srl 1987 - 2012
Skills
RDF, Semantic Search, Semantic Technologies, Semantic Web, OWL, Ontology Development, Linked Data, Semantics
Francesco Canuto
Education
SDA Bocconi 2013 — 2014
Master in Business Administration, MBA
European School of Project Management 2012 — 2012
PMP Certification Course, Project Management
Politecnico di Torino 1998 — 2003
Master's degree, Mechanical Engineering
IT Naval Academy 1994 — 1998
Experience
Fiat Spa April 2014 - Present
FCA Fiat Chrysler Automobiles April 2014 - Present
Fiat Spa September 2010 - September 2014
Centro Ricerche Fiat January 2004 - September 2010
Marina Militare January 1994 - December 2003
Skills
Value Engineering, Kaizen, 5S, Problem solving, Value Stream Mapping, Management, Target Costing, Continuous improvement, Lean Engineering, Industria..., Cost Saving Initiatives, Robust Design, Project Management, Produzione snella, Lean Manufacturing, Control Systems Design, Design of Experiments, Value Creation, Robust Engineering, Veicoli, Cost Engineering, Project management, Ingegneria, Mappatura del flusso di..., FMEA, Design for Manufacturing, Design for Assembly, Manifattura
Francesco Capuzzo
Collaboratore presso Studio Surra Engineering
Renewables & Environment
Education
Politecnico di Torino 2012 — 2015
Laurea Magistrale LM, Ingegneria Energetica e Nucleare, 104 / 110
Politecnico di Torino 2009 — 2012
1° livello - Laurea L, Ingegneria Energetica, 101 / 110
Experience
Studio Surra Engineering March 2015 - Present
Studio Surra Engineering October 2014 - March 2015
Skills
Mc4, Energia, Normativa energetica..., Microsoft Office, PowerPoint, Project management, Attestati di..., FreeFem++, Legislazione energetica..., AutoCAD, Microsoft Excel, Microsoft Word, Matlab, Lavoro di squadra
Francesco Caracciolo
FMS HPI Group Delivery Manager presso SKF
Mechanical or Industrial Engineering
Education
laurea in ingegneria elettronica, Ingegneria elettrica, elettronica e delle comunicazioni
Politecnico di Torino
laurea, ingegneria elettronica
Experience
SKF December 2014 - Present
SKF April 2007 - December 2014
SKF May 2006 - April 2007
SKF November 2004 - April 2006
Skills
Project Engineering, Sviluppo di prodotto, Management, Engineering, Sei Sigma, Gestione della..., Ingegneria, AutoCAD, Manifattura, Industria..., Root Cause Analysis, Ingegneria dei progetti, Continuous Improvement, Ingegneria meccanica, Maintenance Management, Produzione snella, Trattative, Negotiation, Continuous improvement, Project management
Francesco Carbonera
Premium Team Member & SME Agent at Lyoness
Management Consulting
Education
University of Illinois at Chicago 1999 — 2001
Master of Science, Electric Engineering
Politecnico di Torino 1996 — 2001
Laurea, Electronic Engineering
Experience
Free Lance February 2012 - Present
Lyoness January 2011 - Present
IMPRESA March 2008 - February 2012
Valeo July 2007 - July 2008
Selex Communications January 2005 - May 2006
HDT Team January 2002 - May 2006
Telecom Italia 2002 - 2004
Skills
Management Consulting, Business Planning, Change Management, Automotive, Team Management, Team Leadership, Program Management, Integration, Negotiation, Web Marketing, Italian, Marketing Strategy, Web 2.0, Product Management, Team Building, Project Management, New Business Development
Francesco Carcione
Designer
Luxury Goods & Jewelry
Education
2008 — 2010
Laurea Magistrale in Design del Prodotto Eco-compatibile, Design, Eco-design, Industrial Design
2004 — 2008
Laurea di primo livello in Disegno Industriale, Design, industrial design
Experience
Golden Shapes by Gaspari September 2010 - Present
Studio di architettura, Arch. Angelo Iannino April 2010 - May 2010
Skills
Industrial Design, Photoshop, InDesign, Progettazione grafica, Progettazione di..., Adobe Creative Suite, Product Design, Graphic Design
Francesco Cardi
VP of Business Development at Onfido Background Checks
Internet
Education
Politecnico di Torino 1993 — 1994
Scholarship, Physics Dept
Politecnico di Torino 1986 — 1992
Degree, Nuclear Engineering
Philips Research Laboratories 1990 — 1990
Internship, Internship in the Physics Dept
Liceo Scientifico 1981 — 1986
Bachelor of Science (B.S.), Mathematics and Physics
Experience
Onfido Background Checks May 2015 - Present
Chaordic Systems January 2012 - March 2015
Lokku April 2010 - December 2012
Weblogs SL September 2008 - March 2010
Datasul July 2007 - August 2008
Valoris Consulting (www.valorisconsulting.com) March 2006 - June 2007
Bain & Company January 2004 - March 2006
Bain & Company March 2000 - December 2003
Next2Us June 1999 - February 2000
Value Partners May 1995 - July 1999
Skills
Business Development, Product Management, Strategy, ERP, Strategic Planning, Marketing, Product Development, Marketing Strategy, Business Intelligence, Analytics, Telecommunications, Team Management, Management Consulting, Business Planning, Due Diligence, Business Strategy, Mergers & Acquisitions, E-commerce, Social Media Marketing, CRM, Entrepreneurship, PMI, Start-ups, Cloud Computing, Online Advertising, B2B, Project Management, Management, Strategic Partnerships, Competitive Analysis, Mergers, International Business..., Online Marketing, Mobile Devices
Francesco Carrozzo
FTE CRM presso St. Jude Medical
Mechanical or Industrial Engineering
Education
Politecnico di Torino 2008 — 2011
Dottore Magistrale in Ingegneria Biomedica, Ingegneria Biomedica
Politecnico di Torino
Dottore in Ingegneria Biomedica, Ingegneria biomedica/medica
Virtualab
Experience
St. Jude Medical April 2015 - Present
St. Jude Medical December 2014 - Present
MASMEC SpA September 2012 - May 2014
Skills
Strumenti medicali, Elaborazione del segnale, Medical Imaging, Biomedical Engineering, Biotechnology, Image Processing, Sviluppo di prodotto, Immagini medicali, Social Skills, Matlab, SolidWorks, Ricerca e sviluppo, Microsoft Office, Pacemaker, Elettronica, R&D, LabVIEW, Calibration, Communication, C, Digital Image Processing, C, Ingegneria biomedica, Testing, Product Development, Vision systems, Biotecnologia, Elaborazione immagini, Teamwork, Computer Vision, C++, Dispositivi medici, CRT, ICD, Liquid handling...
Francesco Casalegno
High Performance Computing Engineer
Program Development
Education
Ecole polytechnique fédérale de Lausanne 2012 — 2014
Master's degree, Computational and Applied Mathematics, Grade Point Average 5.92/6
Politecnico di Torino 2009 — 2012
Bachelor's degree, Applied Mathematics, 110/110 Cum Laude, Grade Point Average 29.56/30
Experience
EPFL (École polytechnique fédérale de Lausanne) September 2015 - Present
RUAG November 2014 - August 2015
European Space Agency September 2013 - February 2014
EPFL (École polytechnique fédérale de Lausanne) February 2013 - July 2013
PASS (Progetto di Aiuto e di Supporto per lo Studio) January 2012 - June 2012
Francesco Cascella
Ingegnere Gestionale specializzato Pianificazione della Produzione
Consumer Goods
Education
1993 — 2001
Laurea in Ingegneria Gestionale, Programmazione e controllo della produzione, Modelli funzionali per l’industria, Ricerca operativa
Experience
COFRA S.r.l. January 2007 - February 2011
Seat Pagine Gialle June 2001 - December 2006
Skills
Modellazione matematica, Pianificazione..., Business Intelligence, Project management, Strategia d'impresa, Management, Strategia di marketing, Business plan, Gestione vendite
Francesco Cassano
Student at Politecnico di Torino
Medical Devices
Education
Politecnico di Torino 2014 — 2016
Master's Degree, Bioengineering and Biomedical Engineering
Politecnico di Torino 2011 — 2014
Bachelor's Degree, Bioengineering and Biomedical Engineering
Institut national des Sciences appliquées de Lyon
Erasmus Exchange
Liceo Classico
Experience
Politecnico di Torino October 2011 - Present
Skills
English, C, SolidWorks, Engineering, Microsoft Excel, LaTeX, Programming, Simulations, Teaching, Matlab
Francesco Castagnotto
Embedded Software Engineer
Automotive
Education
Politecnico di Torino 2011 — 2013
Master's degree, Computer Engineering, 88/110
Politecnico di Torino 2005 — 2011
Bachelor's degree, Computer Engineering, 87/110
ITIS Giancarlo Vallauri - Fossano (CN) 2000 — 2005
Perito Capotecnito Informatico, Specializzazione Informatica, 80/100
Experience
ALTEN Italia March 2014 - Present
AL.MEC Srl January 2014 - February 2014
Politecnico di Torino March 2013 - December 2013
AFP Dronero December 2008 - June 2009
IAL Formazione Professionale February 2008 - June 2008
Skills
GNU/Linux, VHDL, Confluence, C, XML, GRML, Github, GNS3, Eclipse, Oracle, PHP4/5, Phoronix Test Suite, Sourcery CodeBench, Git, Debian, ASP, Tortoise SVN, Visual Studio, Vector CANalyzer, XSD, C++, Java, VxWorks, Windows Embedded CE, cross compilation, Embedded Linux, Visual Basic, ARM, OS Virtualization, GCC, Matlab, HTML, Log Analysis, Yocto, SQL, Ubuntu, NI LabVIEW, Embedded Systems, Bash, C#, Fedora, Linux Kernel
Francesco Catalano
Information Technology and Services
Education
Corep 2009 — 2010
Higher Education
Politecnico di Torino 2000 — 2007
Master degree
Liceo scientifico Stefano Patrizi 1994 — 1999
Experience
e-Mentor S.r.l. May 2011 - Present
Media and More May 2010 - May 2011
Motorola Mobile Devices September 2009 - December 2009
Atlas Reply November 2007 - June 2008
Avventura Urbana October 2004 - March 2007
Skills
Subversion, XHTML, Linux, Git, PHP, OOP, JavaScript, jQuery, C, Zend Framework, AJAX, Web Applications, CSS, MySQL, Moodle
Francesco Cattaneo
Architect at Me
Architecture & Planning
Education
Politecnico di Torino
Master of Architecture (MArch), Architectural Engineering
Experience
Self-employed January 2008 - Present
Me January 2008 - Present
Francesco Cattoni
Manager at PwC Advisory SpA
Management Consulting
Education
Rheinisch-Westfälische Technische Hochschule Aachen 2007 — 2008
Fluid Automation
Alta Scuola Politecnica 2006 — 2008
Master, Nanotechnology in Automotive
Politecnico di Torino 2005 — 2008
Master of Science, Mechanical Engineering, 110/110 with honours
Politecnico di Torino 2002 — 2005
Bachelor, Mechanical Engineering, 110/110 with honours
Experience
PwC Advisory SpA September 2015 - Present
PwC Advisory SpA September 2013 - August 2015
PwC Advisory SpA November 2011 - August 2013
Altran Italia S.p.A. September 2008 - November 2011
Skills
R&D, Simulations, Project Planning, Product Management, Product Development, Aerospace Engineering, Matlab, Mechanical Engineering
Francesco Catucci
CAE Engineer at Pininfarina Spa
Mechanical or Industrial Engineering
Education
Politecnico di Torino 2009 — 2012
Laurea magistrale in ingegneria aerospaziale, Ingegneria aerospaziale, aeronautica e astronautica, 110/110 e Lode
2006 — 2012
Laurea Magistrale in Ingegneria Aerospaziale, Settore strutture aeronautiche
Politecnico di Torino 2006 — 2009
Laurea triennale in ingegneria aerospaziale, Ingegneria aerospaziale, aeronautica e astronautica, 110/110 e Lode
Experience
Pininfarina Spa January 2013 - Present
Avio Aero September 2011 - March 2012
Skills
Conoscenza apprfondita..., Automotive Engineering, Conoscneza approfondita..., CATIA, Conoscenza approfondita..., Ingegneria..., Computer-aided..., Ingegneria, Simulazioni, Matlab, Buona conoscenza di..., Abaqus, Industria...
Francesco Celli
Studente presso Politecnico di Torino
Mechanical or Industrial Engineering
Education
Politecnico di Torino 2012 — 2016
Laurea breve, Ingegneria aerospaziale, aeronautica e astronautica/spaziale, 102
Liceo Scientifico 2006 — 2011
Diploma di maturità scientifica, liceo scientifico con pni, 100
Francesco Cennamo
Quality Manager presso Codex Srl
Mechanical or Industrial Engineering
Education
Politecnico di Torino 2003 — 2011
Ingegneria meccanica, 88/110
I.I.S. Europa Unita 1998 — 2003
Perito Industriale Meccanico
Experience
Codex Srl January 2012 - Present
Skills
Process Auditing, SolidWorks, FMEA, Control Plans, Internal Audit, Process Flow Charts, ISO/TS 16949, AutoCAD, Quality Auditing, Quality Management, External Audit, Microsoft Office, Quality Control
Francesco Cerutti
Staff Accountant presso KPMG
Accounting
Education
Università Carlo Cattaneo 2008 — 2013
Laurea Magistrale in Amministrazione Aziendale e Libera Professione, Economia Aziendale e Management, 110 su 110
Politecnico di Torino 2006 — 2007
Experience
KPMG September 2013 - Present
Skills
PowerPoint, Microsoft Office, Strategia d'impresa, Microsoft Word, Business plan, Management, Lingua inglese, Analisi di bilancio, Microsoft Excel, Contabilità, Lavoro di squadra
Francesco Cervellera
Graduate Engineer at ARM
Computer Hardware
Education
Politecnico di Torino 2010 — 2012
Master of Engineering (M.Eng.), Electrical, Electronics and Communications Engineering, 110 cum Lauda
2005 — 2010
Bachelor of Engineering (B.Eng.), Electrical, Electronic and Communications Engineerings
Experience
ARM August 2014 - Present
University of StuttgartStuttgart University February 2013 - February 2014
Neromatto Caffè November 2005 - December 2013
Istituto Kronos August 2009 - June 2010
Istituto Kronos February 2009 - May 2009
Gruppo Impedovo Domenico February 2006 - April 2006
Cutting Edge Srl June 2005 - September 2005
Cutting Edge Srl July 2004 - September 2004
Gruppo Impedovo Domenico January 2004 - February 2004
Skills
VHDL, ModelSim, Elettronica digitale, Linux, Sistemi embedded, SystemC, C++, UVM, UML, Bash, Matlab, Testing, C, LaTeX, Qt, Model based Software..., Unified Modeling..., Digital Electronics, SystemVerilog, Unix, Embedded Systems
Francesco Chicco
Research Intern at LSM EPFL
Nanotechnology
Education
Ecole polytechnique fédérale de Lausanne 2014 — 2015
Master in Micro and Nanotechnologies for Integrated Systems, Nanotechnology and Microelectronics
Grenoble INP - Phelma 2014 — 2014
Master in Micro and Nanotechnologies for Integrated Systems, Nanotechnology
Politecnico di Torino 2013 — 2014
Master in Micro and Nanotechnologies for Integrated Systems, Nanotechnology
Politecnico di Torino 2010 — 2013
Bachelor in Physical Engineering / Applied Physics, Engineering Physics/Applied Physics, 110/110
Istituto Superiore Baldessano-Roccati 2005 — 2010
High School Diploma in Classical Studies, Humanities/Humanistic Studies, 100 /100 cum laude
Experience
Grenoble INP IMEP-LAHC June 2014 - August 2014
Skills
Clean Rooms, VHDL, Problem Solving, Applied Physics, Matlab, EDA tools, Optics, Characterization, International Mindset, Nanotechnology, LTSpice, MEMS, Nanofabrication, Microelectronics, COMSOL, Teamwork, Integrated Optics, Testing, English
Francesco Ciancia
Plant Manager presso Fiat Auto Serbia
Automotive
Education
Politecnico di Torino 1994 — 1999
Laurea in Ingegneria Meccanica, 110/110 e lode
Liceo Classico 1989 — 1993
Maturità classica, 60/60
Experience
FCA Serbia February 2013 - Present
FIAT Group Automobiles Cassino November 2011 - February 2013
FIAT Group Automobiles Cassino June 2010 - November 2011
SATA Melfi March 2007 - June 2010
SATA Melfi February 2005 - March 2007
SATA Melfi January 2004 - February 2005
SATA Melfi September 2002 - January 2004
Fiat-GM Powertrain July 2001 - September 2002
Skills
Miglioramento processi, Manifattura, Kaizen, Ingegneria, Toyota Production System, Sistema di produzione..., Lean Manufacturing, Industria..., Continuous Improvement, Vehicles, Six Sigma, Veicoli, Automotive, Engineering, Produzione snella, Manufacturing, Sei Sigma, Mappatura del flusso di..., Settore automobilistico, Ingegneria della..., Continuous improvement, Automobile, 5S, FMEA, Management, Value Stream Mapping
Francesco Ciardo
Senior Network Engineer at Banca d'Italia
Banking
Education
ENSEEIHT - Ecole Nationale Supérieure d'Electrotechnique, d'Electronique, d'Informatique, d'Hydraulique et des Télécommunications 1999 — 2000
Master, Télécommunications et Réséaux
Politecnico di Torino 1994 — 2000
Ingegnere informatico, Ingegneria Informatica
ITIS Lecce 1989 — 1994
Experience
Banca d'Italia June 2008 - Present
Lutech July 2006 - June 2008
Getronics Italia spa February 2001 - July 2006
Aerospatiale Matra Airbus March 2000 - November 2000
Skills
Cisco, JNCIA, Cisco Technologies, VMware, VPN, Network Security, Extreme Networks, Juniper, BGP, TCP/IP, Network Design, Routing, CCNA, F5 BigIP, CCNP, Firewalls, JUNOS, IP Networking, Network Architecture
Francesco Ciccarese Apruzzi
Analista Programmatore presso Elia
Logistics and Supply Chain
Education
Politecnico di Torino
Master of Science (M.S.), Computer Engineering
Experience
Elia December 2010 - Present
Skills
JavaScript, Ricerca, Social media, Lingua inglese, Project management, Microsoft Excel
Francesco Cipriani
Engineering Specialist at FCA Fiat Chrysler Automobiles
Mechanical or Industrial Engineering
Education
University of Illinois at Chicago 2012 — 2013
Master of Science (MSc), Mechanical Engineering, Overall GPA 3.9/4
Politecnico di Torino 2011 — 2013
Master of Science (MSc), Mechanical Engineering, 110/110 with honors
Politecnico di Torino 2008 — 2011
Bachelor of Science (BSc), Mechanical Engineering
Experience
FCA Fiat Chrysler Automobiles October 2013 - Present
University of Illinois at Chicago August 2012 - May 2013
Skills
Microsoft Office, Engineering, ANSYS, Mechanical Engineering, Solid Modeling, Teamcenter, Chemkin, Mould, Cantera, Thermodynamics, Solidworks, Problem Solving, CFD, Injection Molding, Matlab, Automotive Engineering, NX Unigraphics, Teamwork, Energy Efficiency, Plastic Part Design, Renewable Energy, DFMEA, Versatility, Internal Combustion...
Francesco Cirillo
System Engineer Sistemista di veicolo presso Ansaldobreda
Railroad Manufacture
Education
Politecnico di Torino 1997 — 2004
Ingegneria Elettrica
Politecnico di Torino 1997 — 2004
Ingegneria elettrica
Istituto tecnico industriale "G.B.Pentasuglia" Matera 1992 — 1997
perito elettrotecnico
Experience
Ansaldobreda - Pistoia March 2006 - Present
Coepte Rail July 2004 - March 2006
coepte rail July 2004 - March 2006
Francesco Coccia
Business Intelligence Specialist at Technology Reply
Information Technology and Services
Education
Politecnico di Torino 2000 — 2006
Telecommunications Engineering, III Facoltà di Ingegneria
Oracle University
Experience
Reply May 2011 - Present
Reply July 2007 - May 2011
SPESSO Gaskets January 2006 - July 2007
Skills
Windows Server, Linux, Dashboards, Oracle Discoverer, SOA, OBIEE, Oracle SQL, Dashboard, SQL, Oracle, PL/SQL, Weblogic, Data Warehousing, Oracle Warehouse Builder, Database, BI Publisher, OBIEE 11g, Business Intelligence, Oracle SQL Developer, Integration, ETL, Oracle E-Business Suite, Databases
Francesco Coccia
Libero professionista Servizi ambientali Foggia
Mechanical or Industrial Engineering
Education
Ordine Ingegneri di Foggia 2001 — 2001
Iscrizione Ministero Interni, Prevenzione incendi - Collaudi
Ingegnere elettronico
Experience
Studio Tecnico e di consulenza May 1999 - 2012
Varie 1997 - 2012
Istituti vari come di seguito descritto 1995 - 2012
Francesco Coccia
Ingegnere
Renewables & Environment
Education
Politecnico di Torino
Laurea in ingegneria elettronica, Liceo scientifico
Francesco Colletto
Assistant Art Director
Marketing and Advertising
Education
1999 — 2005
Dottore in Disegno Industriale, Product Design, grafica
Experience
BTSadv December 2013 - Present
AKIRA December 2012 - Present
MC Engineering November 2013 - December 2013
Moskito Design September 2013 - November 2013
Freelance April 2006 - August 2013
3 fish in a tree March 2011 - November 2012
brh+ March 2005 - February 2011
Pino Spagnolo Design September 2003 - May 2004
Skills
Graphic Design, Branding e identità, Product Design, Adobe Illustrator, Logo Design, iBooks Author, Direzione artistica, English, Corporate Identity, SketchUp, Creative Direction, Identità societaria, InDesign, 3D Architectural..., Web design, Art Direction, Progettazione grafica, Music Production, Photoshop, Interior Design, Interior design, Stampa, Typ, 3D rendering, Tipografia, Editorial, Illustrator, Fotografia, Photo Editing, Corporate Branding, Web Design, Modern Furniture, Progettazione logo, Direzione creativa, 3D Studio Max, Photography, Corporate branding, Digital Photography, Print, Adobe Creative Suite, Typography, Progettazione di..., Rhino, Branding & Identity
Francesco Colloca
Head of Vehicle Purchasing and Purchasing Product Development
Automotive
Education
Politecnico di Torino 1992 — 2000
Laurea in Ingegneria Meccanica, Veicoli Terrestri
Liceo Charles Darwin, Rivoli, Torino 1986 — 1992
Diploma Scientifico
Experience
Ferrari December 2014 - Present
Ferrari January 2012 - December 2014
Fiat Group Purchasing February 2008 - December 2011
GE Oil&Gas April 2005 - January 2008
Fiat Group Automobiles September 2003 - March 2005
Fiat Auto - Sevel SpA (Val di Sangro plant, JV with Peugeot Citroen) May 2002 - August 2003
GM Fiat Worldwide Purchasing June 2000 - April 2002
Francesco Colombo
Production Group Manager presso Bialetti Industrie
Consumer Goods
Education
Politecnico di Torino 1991 — 2000
Ingegneria meccanica, Maturità scientifica
Experience
Bialetti Industrie March 2013 - Present
Bialetti Industrie August 2008 - February 2013
Bialetti Industrie August 2007 - July 2008
Denso Thermal Systems September 2001 - August 2007
Skills
Leadership, Business Planning, Forecasting, Sviluppo di prodotto, Lean Manufacturing, Manufacturing, Product Development, Supply Chain Management, Supply Chain, Market Analysis, Continuous Improvement, Continuous improvement
Francesco Colonna
Graduate Hardware Engineer, MIPS division presso Imagination Technologies
Computer Hardware
Education
University of Illinois at Chicago 2011 — 2012
Master of Science (M.S.), Electrical and Electronics Engineering, 3.88/4.00
Politecnico di Torino 2010 — 2012
Master of Science (M.Sc.), Electrical and Electronics Engineering, 110/110 cum laude
Politecnico di Torino 2007 — 2010
Bachelor of Science (BSc), Electrical and Electronics Engineering, 110/110 cum laude
Experience
Imagination Technologies August 2013 - Present
EULEGO February 2010 - May 2010
Skills
Parallel Programming, FPGA prototyping, Verilog, Digital Electronics, Microelectronics, Sistemi embedded, VHDL, Xilinx ISE, Orcad, Computer Architecture, VLSI, UVM, ModelSim, Cadence Virtuoso, Embedded Systems, Firmware, Encounter, Integrated Circuit..., Altera Quartus, Octave, Matlab, Neural Networks, C
Francesco Comito
Project Manager / Senior Electrical Engineer presso ELC Electroconsult S.p.A.
Oil & Energy
Education
Politecnico di Torino
Ingegnere
Experience
ELC Electroconsult S.p.A. March 2015 - Present
Francesco Commisso
Titolare e responsabile settori tecnico e commerciale presso Eurotelcom
Telecommunications
Education
Politecnico di Torino 1987 — 1995
Ingegnere Elettronico, Elettronica
Istituto tecnico industriale statale “G. Giorgi “ Brindisi 1981 — 1987
Perito Industriale Capotecnico con specializzazione in Elettronica Industriale, Elettronica Industriale, Elettrotecnica, Tecnologie elettroniche e Informatica
Experience
Eurotelcom March 2001 - Present
Istituto Professionale di Stato per l’Industria e l’Artigianato “G. Martinez” 2000 - 2005
Istituto Professionale di Stato per l’Industria e l’Artigianato “G. Martinez” 2000 - 2005
Istituto Tecnico Parificato Icos September 2002 - July 2003
Istituto Tecnico Parificato Icos September 2002 - July 2003
Istituto Tecnico Parificato Icos September 2002 - July 2003
Istituto Tecnico Parificato Icos September 2002 - July 2003
Tel.Com. S.r.l. January 1997 - March 2001
Tel.Com. S.r.l. January 1988 - January 1997
Skills
Telecommunications, Gestione account, Gestione vendite, Project management, Customer Service, Account Management, Team Leadership, Strategic Planning, Project Management, Telecomunicazioni, Microsoft Office, Telefonia, Reti, Sistemi di sicurezza e..., Pianificazione..., Assistenza clienti, Consulenza, Wireless, Sales Management, Product Management, VoIP, Gestione prodotti, New Business Development, Networking, New business development, Team leadership
Francesco Commisso
Civil structural Engineer (M.Sc.Eng Politecnico di Milano)
Civil Engineering
Education
Politecnico di Milano 2012 — 2015
Laurea Magistrale LM in Ingegneria Civile e Ambientale, Ingegneria civile
Politecnico di Torino 2009 — 2012
Bachelor's degree, Civil engineering
Experience
Politecnico di Milano April 2013 - April 2015
ECSD Engineering February 2014 - May 2014
Skills
Matlab, Microsoft Word, SAP2000, Calcestruzzo, CAD, Rhinoceros 3D, Analisi strutturale, Analisi agli elementi..., Engineering, Seismic, EPS, Concrete, Steel, Ingegneria strutturale, Lingua inglese, Microsoft Excel, English, Composite materials, Microsoft Office, Structural analysis, Abaqus, Ingegneria civile, Eurocode, AutoCAD, Modeling
Francesco Coniglione
Studente presso Politecnico di Torino
Architecture & Planning
Education
Politecnico di Torino 2015 — 2017
Bachelor of Architecture (BArch)
2012 — 2015
Bachelor of Architecture (BArch), Architettura
Experience
Isolarchitetti Srl October 2014 - January 2015
Skills
Adobe Illustrator, AutoCAD, Revit, 3D Studio Max, Computer Hardware, InDesign, Photoshop
Francesco Conte
Mechanical Transmission Manufacturing Engineer
Mechanical or Industrial Engineering
Education
Kungliga tekniska högskolan 2013 — 2014
Master of Science (M.Sc.), Mechanical Engineering
Politecnico di Torino 2012 — 2014
Master of Science (M.Sc.), Mechanical Engineering, 110/110 cum laude
Politecnico di Torino 2009 — 2012
Bachelor of Science (B.Sc.), Mechanical Engineering, 110/110 cum laude
Experience
Avio Aero November 2014 - Present
Energhe, Ferrero Group October 2014 - October 2014
Skills
Ingegneria meccanica, Analisi agli elementi..., Tires, Energy, Matlab, SolidWorks, Problem solving, Mechanics, ANSYS, Microsoft Office, Mechanical Engineering, Simulink, AutoCAD, Energia, Ingegneria, Finite Element Analysis, Windows, CAD, C, Solidworks
Francesco Convertini
Amministratore Unico
Information Technology and Services
Education
1984 — 1990
Luarea, ingegneria Elettrotecnica
Politecnico di Torino 1984 — 1990
Laurea Ingegneria Elettrotecnica, Ingegneria, 104/110
Experience
SISTEMA Srl July 1999 - Present
Moody - Intertek 1999 - 2012
Moody - Intertek 1999 - 2012
Moody - Intertek 1999 - 2012
Centro Sviluppo Materiali January 1992 - August 1999
Francesco Corazza
Engineer with entrepreneurial mindset
Computer Software
Education
Eidgenössische Technische Hochschule Zürich 2012 — 2012
Visiting Student – Master of Science Thesis
Alta Scuola Politecnica 2011 — 2013
Diploma
Politecnico di Torino 2010 — 2012
Master of Science (MSc)
Politecnico di Milano 2010 — 2012
Master of Science (MSc)
Big Dive 2013 — 2013
Intensive course
Università di Bologna 2007 — 2010
Bachelor of Science (BSc)
Liceo Classico L. Ariosto Ferrara 2002 — 2007
High school diploma - Gymnasium diploma
Experience
Empatica September 2014 - Present
Francesco Cordero di Vonzo
Studente presso Politecnico di Torino
Logistics and Supply Chain
Education
Politecnico di Torino 2014 — 2016
laurea magistrale, Ingegneria gestionale/Gestione industriale
Technische Universität Darmstadt 2015 — 2015
Progetto erasmus, Logistica, materiali e gestione supply chain
Politecnico di Torino 2010 — 2014
Bachelor's degree, Industrial Engineering and Management, Ingegneria gestionale/Gestione industriale, 89
Galileo Ferraris Torino 2005 — 2010
Maturità Scientifica, Liceo Scientifico P.N.I. + scienze
Skills
Microsoft Office, Teamwork
Francesco Cornelio
Product Validation at Iveco Bus Iveco France
Mechanical or Industrial Engineering
Education
University of Derby 2010 — 2011
Engineering, Manufacturing and Management
KTH Royal Institute of Technology 2008 — 2009
Erasmus, Ingegneria meccanica
Politecnico di Torino 2007 — 2009
Master's degree, Mechanical Engineering, 110/100 with honours
Università di Bologna / University of Bologna 2002 — 2005
Bachelor's degree, Mechanical Engineering, 110/100 with honours
Experience
Iveco Bus - Iveco France February 2013 - Present
Rolls-Royce January 2012 - January 2013
Rolls-Royce September 2010 - December 2011
FLUOREM April 2010 - September 2010
Alenia Aeronautica February 2007 - September 2007
Skills
Systems Engineering, Aerodynamics, Fluent, Matlab, AutoCAD, Aircraft, Accelerometro, Finite Element Analysis, ICEM CFD, Unigraphics, SC03 (internal Rolls..., Cradle, CFD, PDM, dewesoft, Stress Analysis, Rhinoceros, Flight Test Engineering, Estensimetria, Aerospaziale, Solid Edge, Unigr, Cradl SC/Tetra (CFD..., Ingegneria meccanica, Aerodinamica, ANSYS, Teamcenter, Testing, Ingegneria, misure meccaniche, Aeronautics, Aerospace, Engineering, SAP, Canalyzer, Analisi agli elementi..., Simulink, Fluidodinamica..., Mechanical Engineering, Fortran
Francesco Corona
Libero Professionista Titolare di Studio di Architettura & Design CORONA
Architecture & Planning
Education
Politecnico di Torino
Architetto
Istituto Tecnico per Geometri Enrico Fermi
Diploma di Geometra
Experience
Studio di Architettura & Design CORONA January 1995 - Present
Tribunale e Procura di Taranto January 2009 - 2013
Studio Ingaramo January 2005 - January 2009
Studio Pession Associato January 2004 - January 2005
Studio FZ January 2002 - January 2004
Skills
Architecture, Interior design, Progettazione..., AutoCAD, Sustainable Design, SketchUp, Interior Design, Photoshop, Artlantis Studio, Adobe Illustrator, Microsoft Office, ArchiCAD, Pinnacle Studio, Revit, Architectural Design
Francesco Cotroneo
Impiegato presso Fiat Group Purchasing
Automotive
Education
1994 — 2000
Laurea, Ingegneria Mecanica
Experience
Fiat Group April 2011 - Present
Fiat Group December 2007 - March 2011
Geco Oleodinamica February 2007 - December 2007
Trioneuro February 2006 - January 2007
Euroheat July 2004 - February 2005
GTD March 2003 - June 2004
CERN December 2001 - January 2003
Skills
Procurement Outsourcing, Friction Stir Welding, Gearboxes, Gage R&R, Driveline, Process Capability, Supply Management, Cold Forming, Shafts, Strategic Supplier..., TS16949, Friction, PFEMA, Supplier Quality, PPAP, 7-Step, Splines, APQP, Quality Auditing, Gear Manufacturing, Clutch, Procurement Contracts, Broaching, Supplier Quality..., Gage R & R, Quality Tools, 8-D
Francesco Cotrufo
1
Construction
Education
EFAP 2013 — 2014
Tecnico ambiente energia e sicurezza, Ecogestione, audit ambientale e sicurezza in azienda
Politecnico di Torino 2006 — 2014
Ingegnere edile, Ingegneria edile, 94/110
Forte Chance Piemonte 2011 — 2011
Corso di specializzazione, Tecnico della Bioedilizia-Indirizzo impianti
I.T.I.S. G.B. Pentasuglia 2000 — 2005
Perito elettrotecnico, Diploma, 80/100
Experience
Valeo February 2015 - Present
Aurora S.r.l. November 2014 - January 2015
Studio Durando & C. S.a.s. November 2013 - July 2014
Studio Durando & C. S.a.s. July 2013 - July 2013
Fresia Alluminio April 2011 - June 2011
Skills
Civil Engineering, Applicazione delle..., Energy, -disponibilità al..., Business Planning, Energie rinnovabili, English, Microsoft Office, Ingegneria civile, Business plan, ambiente, -attitudine a lavorare..., Engineering, Photoshop, Lingua inglese, qualità, Construction, Energy Efficiency, Project Planning, Efficienza energetica, Microsoft Word, Problem Solving, Problem solving, Project Engineering, sicurezza, Ingegneria, AutoCAD, Microsoft Excel, Sicurezza, Renewable Energy, Project management, -attitudine a lavorare..., Edilizia, Project planning, -ottima flessibilità
Francesco Crupi
Production Manager Repair & Overhaul Dynamic Systems presso AgustaWestland
Aviation & Aerospace
Education
1997 — 2003
Ingegnere, meccanica
Technische Universität München 2001 — 2002
Programma Erasmus, Ingegneria meccanica
Experience
AgustaWestland September 2014 - Present
Ansaldobreda March 2013 - August 2014
Ansaldobreda August 2012 - February 2013
Ansaldobreda July 2009 - July 2012
Ansaldobreda June 2008 - July 2009
Ansaldobreda February 2006 - June 2008
Ansaldobreda March 2005 - February 2006
Polisud January 2004 - March 2005
Skills
Contract Management, Continuous Improvement, 5S, Business Strategy, Management & Enterprise..., Root Cause Analysis, Strategic Planning, Kaizen, Change management, Ingegneria gestionale, Manufacturing, Value Stream Mapping, Operations Management, Lean Manufacturing, Negotiation, Ferrovie, Project management, Project planning, OHSAS 18001
Francesco Cunsolo
Energy and Nuclear Engineer
Oil & Energy
Education
Politecnico di Torino 2014 — 2016
Master's degree, Energy Engineering - Innovation in energy production
Politecnico di Torino 2011 — 2014
Bachelor of Engineering (BE), Energy and nuclear engineering
Conservatorio di Alessandria
Diploma in pianoforte vecchio ordinamento
Liceo Scientifico A. Gramsci 2006 — 2011
87/100
Experience
Team D.I.A.N.A. - Politecnico di Torino September 2013 - Present
Skills
Microsoft Excel, Microsoft Word, Microsoft Office
Francesco Cutrona
Performance Engineer presso Pininfarina
Automotive
Education
Politecnico di Torino 2005 — 2010
Master's degree, Ingegneria meccanica, 110 e lode
Experience
Pininfarina June 2014 - Present
Ferrari August 2012 - May 2014
Pininfarina September 2011 - August 2012
Avio Aero March 2011 - September 2011
Francesco D'Accico
Impiegato Settore IT presso Banca Reale S.p.A.
Information Technology and Services
Education
Politecnico di Torino 2003 — 2013
Dott. Ing. Informatica, Ingegneria Informatica
Experience
Banca Reale S.p.A. October 2014 - Present
Skills
CSS, Strategia d'impresa, Leadership, Sviluppo Oracle SQL, ASP, JavaScript, SQL, Linux, Microsoft Access, Server Microsoft SQL, Banking, Microsoft Office, Management, C, Toad, MySQL, Microsoft Windows, C++, PHP, Windows, HTML
Francesco D'Introno
Impiegato commerciale presso Selesta Ingegneria S.p.a.
Information Technology and Services
Education
Ipsia Amaldi
Politecnico di Torino
Ingegneria elettrica ed elettronica
Experience
Selesta Ingegneria S.p.a. February 2014 - Present
Selesta Ingegneria S.p.a. January 1999 - February 2014
Embraco March 1996 - December 1998
Skills
Telecomunicazioni, Cloud computing, Trattative, Business development, New business development, Pre-vendite, Microsoft Office, Project management, Vendita di soluzioni, Integrazione, Gestione vendite, Sicurezza