K. N. Toosi University of Technology Alumni

Ahmad Hashemi

Bologna, Emilia-Romagna, Italy
Researcher at University of Bologna
Research

Education
Università di Bologna   2014 — 2017
Doctor of Philosophy (Ph.D.), Electrical and Electronics Engineering

Azarbaijan University of Tarbiat Moallem   2006 — 2009
Master of Science (M.S.), Electrical and Electronics Engineering

K. N. Toosi University of Technology   2002 — 2006
Bachelor of Science (BSc), Electrical and Electronics Engineering

Experience
University of Bologna   November 2014 - Present
University of Bologna   November 2014 - Present
Islamic Azad University (IAU)- دانشگاه آزاد اسلامی   October 2014 - Present
Islamic Azad University (IAU)- دانشگاه آزاد اسلامی   September 2010 - November 2014
Islamic Azad University (IAU)- دانشگاه آزاد اسلامی   February 2010 - December 2010
Neda Pardaz Infromatics Co.   March 2006 - September 2006

Skills
Mathematical Modeling, English, Modeling, Matlab, Simulations, World History, Wrestling, Research, Persian, Dynamaic Simulation, Statistics, Electrical Engineering, Academic English, University Teaching, Optimization, Kurdish, Simulink

Ahmad Rezaei Nia

Nürnberg Area, Germany
Vice President at Technology transfer .co

Education
Executive Management by Industrial Development and Renovation Organisation of IRAN.IDRO   2003 — 2005
(MBA)

K. N. Toosi University of Technology   1993 — 1998
Bachelor of Applied Science (BASc), Maschinenbau

Experience
IKCO   2001 - 2012

Ali Abbasi

The Hague Area, Netherlands
Ph.D Candidate at Delft University of Technology
Civil Engineering

Education
K. N. Toosi University of Technology   2003 — 2005
Master's Degree, Hydraulic Structures, 19.0 out of 20.0 (Graduated summa cum laude)

Iran University of Science and Technology   1999 — 2003
Bachelor's Degree, Majoring Hydraulics (Water), 16.35 out of 20.0 (Graduated summa cum laude)

Experience
TU Delft   April 2011 - Present
University of Birjand   October 2006 - March 2011
Toos Ab Consulting Company   October 2005 - October 2006
Payab Kowsar   May 2002 - October 2005

Skills
Paraview, Fluid Mechanics, OpenFOAM, Numerical Simulation, Hydrology, Gnuplot, Fortran, ParaView, Fluid Dynamics, Programming, Gmsh, Numerical Analysis, Matlab, Python, LaTeX, Linux, SALOME, Water Resources, Scientific Computing

Ali Fekri

Antwerp Area, Belgium
Design Engineer at CMOSIS
Electrical/Electronic Manufacturing

Education
Technische Universiteit Delft   2009 — 2012
Master of Science (M.Sc.), Microelectronics

K. N. Toosi University of Technology

Experience
CMOSIS   October 2012 - Present
TU Delft   December 2011 - October 2012
ASML   June 2011 - September 2011

Skills
Matlab, Agilent ADS, Mixed Signal, Microelectronics, Electrical Engineering, Sensors, Circuit Design, Analog Circuit Design, FPGA, IC, Cadence Virtuoso, CMOS, Analog, Integrated Circuit..., Labview, Xilinx, VHDL

Ali Khalili

Amsterdam Area, Netherlands
Postdoctoral Researcher at Vrije Universiteit Amsterdam
Information Technology and Services

Education
University of Leipzig   2011 — 2014
PhD, Computer Software Engineering

K. N. Toosi University of Technology   2007 — 2009
MSc, Information Technology (e-commerce)

Shahid Beheshti University   2003 — 2007
BSc, Software Engineering

Experience
Vrije Universiteit Amsterdam / VU University Amsterdam   February 2015 - Present
University of Leipzig   April 2011 - February 2015
Vrije Universiteit Amsterdam   2010 - December 2010
Shaheed Beheshti University   March 2005 - July 2007

Skills
Algorithms, RDFa, Programming, PHP, SPARQL, Computational..., Semantics, Artificial Intelligence, Java, Ontologies, Ontology Engineering, Semantic Web, RDF, Knowledge Representation, JavaScript, Linked Data, LaTeX, Natural Language..., Information Retrieval, Machine Learning, Computer Science, C++, Information Extraction, Knowledge Management, SOA, Distributed Systems, Semantic Technologies, Web 2.0, UML, Research, Software Engineering, Text Mining

Alireza Khakpour

Neubrandenburg Area, Germany
Wissenschaftlicher at Leibniz Institute for Plasma Science and Technology (INP Greifswald) e.V.
Research

Education
Leibniz Universität Hannover   2011 — 2013
Master's degree, High voltage, 1.3

K. N. Toosi University of Technology   1998 — 2003
Bachelor's degree, Power system, 14.37

Experience
Leibniz Institute for Plasma Science and Technology (INP Greifswald) e.V.   August 2013 - Present
Ghods Niroo Engineering Company (GNEC)   April 2003 - August 2013

Skills
Microsoft Office, PSS/E, Research, Mathematical Modeling, Simulink, Engineering, Simulations, Matlab, Science, ETAP, Digsilent, EMTP, Programming, Electrical Engineering, Power Systems

Alireza Tajfar

Milan Area, Italy
Attended KNT University of Tech.
Electrical/Electronic Manufacturing

Education
Politecnico di Milano   2013 — 2016
Master of Science (MS), Electronic Engineering, 28/30

K. N. Toosi University of Technology   2009 — 2013
Bachelor of Science (BSc), Electrical and Electronics Engineering, 16/20

Experience
Farnas aerospace Co.   March 2013 - October 2013
Salam Iranzamin High School   2010 - 2013
Pooya Andish Electronic Co.   June 2012 - September 2012
Samaneh Gostar Hanif Kosar Co.   March 2012 - June 2012
Salam Sadeghieh High School   2009 - 2012

Skills
Microcontrollers, Embedded Systems, Testing, VHDL, Altium Designer, Matlab, C++, Teaching, Codevision AVR, Electrical Engineering, Simulink, Electronics, Quadrotor, Electronic Circuit..., C, UAV, Electronic Control..., Software, Programming, P Spice, Verilog, Sensors, ARM uC, FPGA, Multirotors

Amir Ghahremani

Eindhoven, Provincie Noord-Brabant, Netherlands
Eindhoven University of Technology
Electrical/Electronic Manufacturing

Education
Eindhoven University of Technology   2015 — 2019
Doctor of Philosophy (Ph.D.), computer vision, machine learning

K. N. Toosi University of Technology   2011 — 2014
Master's Degree, Computer vision, Image and Video processing, Machine learning

Urmia Azad University


Skills
Xilinx FPGAs, VHDL, DXP, AVR, Matlab, C/C++

Amir Rabbani

London, United Kingdom
Lead Mapping Coordinator at Whistl
Logistics and Supply Chain

Education
University of Tehran   2009 — 2011
Master's Degree, Remote Sensing

K. N. Toosi University of Technology   2004 — 2008
Bachelor's Degree, Geomatics and Surveying Engineering

Experience
Whistl   October 2014 - Present
Whistl   December 2013 - October 2014
GeoDurkav Surveying Co.   November 2010 - August 2013

Skills
Geodesy, Data Collection, Swarm Intelligence, Cartography, Web Mapping, Geocoding, Remote Sensing, LiDAR, ENVI, Aerial Photography, Maps, ArcGIS, Geomatics, Geoprocessing, GIS, Visual C#, Spatial Analysis, Cellular Automata, ArcCatalog, RDBMS, Geodatabase, LINQ, GPS, Matlab, Microsoft SQL Server, Photogrammetry, Surveying, Google Earth, Databases, Topographic Surveys, Spatial Databases, ArcMap, Geography, Data Management, Data Mapping

Amir Sarhangi

Milan Area, Italy
Researcher at University of Milan
Research

Education
University of Twente (Faculty of ITC)   2008 — 2010
Msc., Geoinformatics

K. N. Toosi University of Technology

K. N. Toosi University of Technology

Experience
University of Milan   January 2014 - October 2014
Geomatics Technology   September 2013 - January 2014
Dana Geophysics   December 2012 - March 2013
Faculty of Geo-Information Science and Earth Observation (ITC) of the University of Twente   2008 - 2010
Faculty of Geo-Information Science and Earth Observation (ITC) of the University of Twente   2008 - 2010
Mabna Niroo   January 2004 - January 2008

Skills
Research, LaTeX, Programming, Microsoft Office, ArcGIS, ArcObjects, Mathematics, ENVI, AutoCAD, Matlab, .NET, C#, English

Arian Jafari

Lecco, Lombardia, Italy
Trading Agent
Business Supplies and Equipment

Education
Università degli Studi di Milano   2014 — 2017

K. N. Toosi University of Technology
Bachelor’s Degree, Industrial Engineering

Experience
Rasta Language Academy   December 2011 - June 2014
GIV manufacturing company   October 2009 - March 2014

Skills
Microsoft Office, Project Management, CATIA, PowerPoint, Research, Management, Customer Service, Leadership, Public Speaking, Microsoft Excel, Microsoft Word

Aso Rahimzadegan

Karlsruhe, Baden-Württemberg, Germany
Master Student at Karlsruhe Institute of Technology (KIT)
Nanotechnology

Education
Karlsruhe Institute of Technology (KIT)   2013 — 2015
Master's Degree, Optics and Photonics, 1.5 (=Outstanding Achievement in German Grading System)

K. N. Toosi University of Technology   2008 — 2013
Bachelor's Degree, Electrical (Telecommunications) Engineering, 17.06/20

Experience
Institut für Theoretische Festkörperphysik (TFP), Karlsruher Institut für Technologie (KIT)   April 2015 - Present
Institut für Mikrostrukturtechnik (IMT), Karlsruher Institut für Technologie (KIT)   November 2014 - March 2015
Institut für Mikrostrukturtechnik (IMT), Karlsruher Institut für Technologie (KIT)   August 2014 - October 2014
Karlsruher Institut für Technologie (KIT)   September 2014 - September 2014
Khaje Nasir Toosi (K. N. Toosi) University of Technology   September 2011 - September 2012
Iran Telecommunication Research Center, CTU   July 2012 - August 2012
Khaje Nasir Toosi (K. N. Toosi) University of Technology   September 2011 - February 2012
Khaje Nasir Toosi (K. N. Toosi) University of Technology   March 2010 - February 2012

Skills
Photonics, PowerPoint, C++, Simulations, SEMCAD, Clean Rooms, Microsoft Word, C, Zemax, Signal Processing, Fourier Optics, Optical Fiber, PSpice, Simulink, COMSOL, Office Tools, Microsoft Excel, Proteus, Pspice, Matlab, Electron Beam..., AVR studio, LabVIEW, CST Microwave Studio, LaTeX, Silicon Photonics, Microsoft Office, Optics, Computational..., Programming, Research, Lithography, X-ray Diffraction...

Bahram Manafi Khanian

Northern Region, Denmark
PhD Fellow at Aalborg University
Mechanical or Industrial Engineering

Education
Aalborg Universitet   2013 — 2015
Doctor of Philosophy (Ph.D.), Biomedical Science and Engineering, PhD

Iran University of Science and Technology   2003 — 2006
Master's Degree, Biomedical Engineering, Biomechanics

K. N. Toosi University of Technology   1999 — 2003
Bachelor's Degree, Mechanical Engineering, Solid Mechanics

Experience
Aalborg University   April 2013 - Present
Tehran   June 2006 - February 2013
Iran University of Science and Technology   September 2003 - September 2006

Skills
Mechanical Engineering, Matlab, Mechanics of Materials, FEM analysis, Solid Mechanics, PTC Creo, Biomechanics, Mathematical Modeling, COMSOL, Biomedical Engineering, Mathematics Education

Behzad Sepehrian Bahary Nejad

Aberdeen, United Kingdom
Researcher at University of Aberdeen

Education
University of Aberdeen   2014 — 2017
Doctor of Philosophy (Ph.D.), Management, Postgraduate Researcher

University of Tehran   2012 — 2014
Master's Degree, Industrial Engineering

K. N. Toosi University of Technology   2007 — 2012
Bachelor's Degree, Industrial Engineering( System Analysis)

Experience
University of Aberdeen   November 2014 - Present

Skills
Project Management, C++, Supply Chain Management, Quality Control, Strategic Enterprise..., System Dynamics, Artificial Intelligence, Design & Facility Layout, Statistics, Vehicle Routing, Research, Engineering Economics, Minitab, Vensim, Preventive Maintenance..., Inventory Control, Microsoft Excel, Matlab, Metaheuristics, Solar Systems, PowerPoint, GAMS, Microsoft Word

Ehsan Asadi

Coimbra Area, Portugal
Cofounder & Shareholder at Orbitrade Company Ltd./ Postdoctoral fellow at UC
Oil & Energy

Education
University of Coimbra/MIT Portugal   2008 — 2012
PhD, Sustainable Energy Systems

K. N. Toosi University of Technology   2006 — 2008
MSc, Energy System

Shahid Chamran University
Bachelor, Fluid mechanics engineering

Experience
Orbitrade Company/ UC   MITPortugal PhD candidateMIT Portugal ProgramSeptember 2008 - November 2013
LAETA/ADAI   February 2009 - January 2011
Research Institute of Petroleum of IRAN (RIPI)   May 2007 - September 2008
Maral Industrial Power Co.   September 2005 - January 2007
NIOC   May 2005 - September 2005
Poulad Machine manufacturing   September 2004 - March 2005
South Engineering Service and Turbine Industrial Equipment Co.   June 2004 - September 2004
Ahvaz Municipality Computer Institute   September 2001 - April 2004

Skills
Trading, Modeling, Engineering, Simulations, Microsoft Office, Sustainability, Energy Efficiency, Aspen Plus, Matlab, Windows, Optimizations, R&D, TRNSYS, Research, Renewable Energy, AutoCAD, Analysis, Sustainable Development, Energy, Optimization, Aspen HYSYS, Sustainable Energy, LaTeX, Science, Petrochemical

Ehsan Tahmasebi

Milano, Lombardia, Italy
PhD Scholar Energy Engineering Politecnico di Milano
Oil & Energy

Education
Politecnico di Milano   2013 — 2016
Doctor of Philosophy (PhD), Energy (Internal Combustion Engines), Continue

K. N. Toosi University of Technology   2009 — 2013
PhD applicant, Aerospace Propulsion, Withdrawn

Iran University of Science and Technology   2002 — 2006
Bachelor's degree, Mechanical Engineering

K. N. Toosi University of Technology   2006 — 2009
Master's degree, Aerospace, Aeronautical and Astronautical/Space Engineering

Experience
Propulsion and Power Engineering Research Center (ProPERC)   July 2008 - October 2013
Space Transportation Research Institue   June 2007 - June 2008

Skills
Heat Transfer, Modeling, C++, MS Project, Numerical Analysis, Microsoft Office, Fortran, Systems Engineering, Mechanical Engineering, Fluid Dynamics, ANSYS, Programming, Solidworks, Internal Combustion..., Thermodynamics, Project Management, Combustion, Fluid Mechanics, Tecplot, Aerospace Engineering, Simulations, Space Systems, Matlab, Propulsion, Mathematical Modeling, OpenFOAM, Numerical Simulation, Robotics, Simulink, Aerospace, CFD, Engineering

Ehsan Zeinali

Frederiksberg, Region Hovedstaden, Denmark
Geotechnical Structure Designer/ Constructional Site Manager
Civil Engineering

Education
K. N. Toosi University of Technology   2009 — 2012
Master’s Degree, Geotechnical Engineering

Arak University   2004 — 2009
Bachelor’s Degree, Civil Engineering

Experience
Paydar Pey Mana Geotechnical Engineering Co.   October 2011 - July 2015
Civil engineering Dept. Of Iran Army (Mandatory Military Service)   June 2012 - March 2014
Baravord Construction Co.   October 2008 - October 2011

Skills
Microsoft Excel, PLAXIS, Microsoft Word, ETABS, Structural Analysis, PowerPoint, Soil Nailing, GeoStudio, Slope Stability Analysis, Matlab, AutoCAD, Excavation Safety

Elham Ebrahimi

Edinburgh, City of Edinburgh, United Kingdom
Senior RF Engineer at BrandRex
Telecommunications

Education
The University of Birmingham   2007 — 2011
PhD, Electrical Engineering

Tarbiat Modares University   2004 — 2006
MSc, Electrical Engineering

K. N. Toosi University of Technology   1999 — 2004
BSc, Electrical Engineering

Experience
Brand-Rex   February 2015 - Present
CommScope   October 2012 - January 2015
SOFANT Technologies   June 2012 - October 2012
Harada Industries (Europe) Ltd   June 2011 - May 2012
IMST GmbH   July 2009 - June 2010
Taliya Mobile   2004 - 2006

Skills
MIMO, RF design, Antenna Measurements, RF Engineering, Wireless, Cellular Communications, Microwave, R&D, RF, CST Microwave Studio, Electromagnetics, PCB design, Antennas, 4G, Radio

Esmaeil Najafi

The Hague Area, Netherlands
PHD Candidate at TU Delft
Mechanical or Industrial Engineering

Education
Delft University of Technology   2011 — 2015
Doctor of Philosophy (Ph.D.), Systems and Control, Robotics

K. N. Toosi University of Technology   2007 — 2010
Master’s Degree, Mechanical Engineering, Dynamics and Control

K. N. Toosi University of Technology   2003 — 2007
Bachelor’s Degree, Mechanical Engineering

Experience
TU Delft   November 2011 - Present
Start-up Company in Robotics   October 2010 - September 2011
Azad University (IAU)   February 2009 - July 2011
Mahan Company   October 2007 - September 2010
IKCO   June 2006 - September 2006

Skills
Machine Learning, Heat Transfer, Robotics, Physics, Numerical Analysis, COMSOL, LaTeX, Solidworks, Simulink, Algorithms, Fortran, CFD, ANSYS, Mathematica, Experimentation, Numerical Simulation, Mechatronics, Simulations, Artificial Intelligence, Mathematical Modeling, Matlab, Dynamics, Signal Processing, Thermodynamics, Finite Element Analysis, Automatic Control, Fluid Mechanics, Optimization, System Identification, Modeling, Fluid Dynamics, Computational Mechanics

Hamed Barzegar Ganji

Southern Region, South Jutland, Denmark
Project Engineer at Dansk IngeniørService A/S
Oil & Energy

Education
K. N. Toosi University of Technology   2007 — 2010
Master of Science (M.Sc.), in Aerospace Engineering - Propulsion (Gas Turbine - Jet Engine)

University of Kashan   1999 — 2004
Bachelor of Science (B.Sc.), in Mechanical Engineering - Solid Design

National Organization for Development of Exceptional Talents (NODET)   1995 — 1999
High school, Mathemathics and Physics, High school diploma

lærdansk
Modul 2-3, Danish Language

Experience
Dansk IngeniørService A/S   August 2014 - Present
Royal Oyster Group (ROG)   July 2011 - November 2013
Khaje Nasir Toosi (K. N. Toosi) University of Technology   February 2011 - July 2013
Pentane Chemistry Industries Co. (PCI)   October 2010 - July 2011
IRICO   June 2007 - December 2009
Kooshkan Transformers (Tesco)   May 2006 - October 2006
Misagh Manufacturing & Industrial Factory   July 2004 - December 2004

Skills
Project Engineering, Transformer, 3D Modeling, Procurement, PDMS Design, Simulations, Solidworks, CFD, P&ID, Process Piping Design, Drawing, PVElite, Fixtures, CFD Simulations and..., Heat Transfer, Pumps, Manufacturing, Tool & Die, Combustion Analysis, Fortran, Manufacturing Processes, ANSYS, Gas Turbines, FMEA, Autodesk Inventor, Combustion, FEM Analysis, Compressor, Mechanical Engineering, Sheet Metal, PFD, Offshore Oil & Gas, Design for Manufacturing, CFX, Assembling, Oil and Gas Rotary...

Hamed Fatemi

Eindhoven Area, Netherlands
Department Manager at NXP Semiconductors
Research

Education
Eindhoven University of Technology   2002 — 2006
PhD, Computer Architecture

K. N. Toosi University of Technology   1998 — 2001
M.Sc, Electrical Engineering

University of Tehran   1994 — 1998
B.Sc, Electrical Engineering

Nikan highschool   1983 — 1994

Experience
NXP Semiconductors   April 2014 - Present
NXP   February 2008 - April 2014
Eindhoven University of Technology   August 2006 - February 2008
Eindhoven University of Technology   August 2002 - August 2006
Philips Research   2003 - 2004
MpegIran   August 2001 - August 2002
Iran Communications Industries   1997 - 2001

Skills
Processors, Semiconductors, RTL design, Software, PCB design, Microcontrollers, Matlab, Image Processing, Verilog, R&D, FPGA, Signal Processing, Integrated Circuit..., Algorithms, Low-power Design, ASIC, Materials Science, Video Processing, Digital Signal..., Simulations, RF, Circuit Design, IC, Computer Vision, ARM, LaTeX, Embedded Systems, SoC, VHDL, Hardware Architecture, Analog, Digital Signal...

Hamid Jafari

Jonkoping, Sweden
PhD, Assistant Professor
Logistics and Supply Chain

Education
Jönköping International Business School   2009 — 2014
PhD, Business Administration, Retailing

Kungliga tekniska högskolan / KTH Royal Institute of Technology   2006 — 2008
MSc, Industrial Engineering, Production Engineering and Management

K. N. Toosi University of Technology   2001 — 2005
BSc, Industrial Engineering, Systems Analysis and Planning

Experience
Jönköping University   January 2015 - Present

Skills
Marketing, Retail Management, Marketing Management, E-commerce, Innovation Management, Category Management, Retail, Multi-channel Retail, Supply Chain, Private Label, B2B Marketing, Supply Chain Management, Consumer Logistics, Quality Management, Logistics, Brand Loyalty

Iman Madadi

Delft, Provincie Zuid-Holland, Netherlands
CTO and Cofounder at Qualinx
Research

Education
Delft University of Technology   2010 — 2014
Doctor of Philosophy (Ph.D.)

University of Tehran   2007 — 2010
Master of Science (M.Sc.), Electrical and Electronics Engineering

K. N. Toosi University of Technology   2002 — 2007
Bachelor's Degree

NODET
Diploma, Physics and Mathematics

Experience
Qualinx BV   February 2015 - Present
TU Delft   November 2010 - April 2015
M4S NV, Huawei Technologies   September 2013 - September 2014

Skills
RF, Circuit Design, Signal Processing, VHDL, Simulink, Matlab, Mathematical Modeling, Receivers, Simulations, LaTeX, Sensors, Integrated Circuit..., Electrical Engineering, Agilent ADS, Semiconductors, Electronics, Cadence Virtuoso, Verilog, FPGA, Analog Circuit Design, ModelSim

Kambiz Ansari

Central Region, Denmark
Mechanical Engineer
Oil & Energy

Education
Daneshgah-e-Sanati-e-Khaje Nasir-ul-Din Toosi   2006 — 2009
Master of Science (MSc), Mechanical Engineering, 17.9 (out of 20)

Islamic Azad University   2000 — 2005
Bachelor of Science (BSc), Mechanical Engineering

Experience
Mapna Turbine Manufacturing Co.   January 2010 - August 2012
TOP company   January 2009 - January 2010

Skills
EPC, Valves, Steam Turbines, Oil/Gas, Commissioning, Thermodynamics, Heat Exchangers, Turbomachinery, AutoCAD, Fluid Mechanics, Engineering Design, ASME, Engineering, Petroleum, Pro Engineer, Inspection, Heat Transfer, HVAC, Materials, Pipelines, Project Engineering, Pressure Vessels, Calculations, Stress Analysis, Power Generation, FEED, Solidworks, Pumps, P&ID, Energy, Turbines, Power Plants, CAESAR II, Air Compressors, Finite Element Analysis, PDMS, Petrochemical, Gas Turbines, Simulations, Gas, CAD, Piping, Rotating Equipment, CFD, Mechanical Engineering, Welding, ANSYS, Tanks, Refinery, Factory

Mahdi Ebrahim

Milan Area, Italy
PhD candidate in Technology Management and Strategy at Bocconi University

Education
University of Tehran   2008 — 2010
Master’s Degree, Entrepreneurship Management

K. N. Toosi University of Technology   2001 — 2006
Bachelor’s Degree, Mechanical Engineering

Experience
Bocconi University   September 2011 - Present

Skills
Microsoft Excel, Economics, Marketing Management, Microsoft Word, Innovation Management, Market Research, Project Management, Business Planning, Analysis, English, Microsoft Office, Research, Entrepreneurship, Management Consulting, Strategic Planning, Technology Management, Matlab, Business Strategy

Maryam Alizadeh Zolbin

Randers C, Region Midtjylland, Denmark
Materials Engineer, Electron Microscopy Scientist, Materials tests Specialist (Looking for new opportunities)
Nanotechnology

Education
K. N. Toosi University of Technology   2004 — 2007
Master's degree, Materials Engineering, Materials selection and design

Amirkabir University of Technology - Tehran Polytechnic   1999 — 2004
Bachelor's degree, Materials Engineering, Metallurgy

Experience
Materials and Energy Research Center (MERC)   May 2007 - December 2014
Iran Nanotechnology Initiative Council   September 2010 - November 2010
Sharif University Branch(ACECR)   September 2005 - November 2006

Skills
Photolithography, Electron Microscopy, Optical Microscopy, Failure Analysis, TEM, Materials, Nanotechnology, Characterization, Metallography, Metals, Analysis, Experimentation, Material Selection, Microsoft Office, CVD, Research, Thin Films, Gas, Metallurgy, FTIR, Surface, Ceramic, Training, AFM, Mechanical Testing, PVD, Nanomaterials, Polymers, Laboratory, SEM, Powder X-ray Diffraction, Engineering, Electrochemistry, Microscopy, Biomaterials, Materials Science, Lithography, MEMS, WAXS, Scanning Electron..., Spectroscopy

Maryam BAHRAMIPANAH

Prilly, Canton de Vaud, Switzerland
Doctorant Assistante at Ecole polytechnique federal de Lausanne
Electrical/Electronic Manufacturing

Education
Ecole polytechnique fédérale de Lausanne   2012 — 2016
Doctor of Philosophy (Ph.D.), Power System Engineering, 6 (of 6)

University of Tehran   2008 — 2011
Master's Degree, electrical power engineering, 17.17 (of 20)

K. N. Toosi University of Technology   2003 — 2007
Bachelor's Degree, electrical power engineering, 15.0 (of 20)

Experience
Niroo Research Institute   July 2009 - December 2009
University of Tehran   January 2009 - December 2009
Peiman Khotot Gostar Company   March 2008 - September 2008

Skills
Simulink, Labview, Matlab, Digital Signal..., Pspice, LabVIEW, VHDL, Optimization, C++, LaTeX, Robotics, Signal Processing, Machine Learning, PSpice, Sensors, Experimentation, Simulations, Mathematical Modeling

Masoud Dorosti

Eindhoven Area, Netherlands
Researcher in Research Department at ASML
Semiconductors

Education
Eindhoven University of Technology
Doctor of Philosophy (PhD), Dynamics and Control

Delft University of Technology   2009 — 2011
MSc, Systems and Control

K. N. Toosi University of Technology   2002 — 2007
BSc, Electrical Engineering-Systems and Control

Experience
Eindhoven University of Technology   April 2013 - Present
ASML   April 2013 - Present
ASML   January 2014 - January 2015
ASML   August 2011 - March 2013
Nobleo   August 2011 - March 2013
TNO Industrie en Techniek   September 2010 - July 2011
Delft University of Technology   September 2009 - July 2011
Nargan Company   September 2008 - August 2009
K.N.Toosi University of Technology   February 2006 - July 2009
Y.N.Saleh Company   January 2006 - June 2008

Skills
Semiconductors, Sensors, Systems Management, Mathematical Modeling, Numerical Simulation, System Identification, Control Systems Design, LaTeX, Mechatronics, Simulink, Mechanics, Mechanical Engineering, Robotics, Modeling, Control Theory, Dynamics, Electrical, Electronics, Simulation, Signal Processing, Algorithms, Image Processing, Numerical Analysis, Lithography, C++, Embedded Systems, Optimization, Semiconductor Industry, R&D, Fortran, Computer Vision, Instrumentation, Power Electronics, Matlab, Digital Signal..., Simulations, Physics, Electrical Engineering, Optics, Control System Design

Mo Sharif

Rotterdam Area, Netherlands
Civiel ingenieur & Stedenbouwkundige met meer dan 25 j ervaring opzoek naar werk
Architecture & Planning

Education
University of Tehran   1992 — 1995
Master of Science (M.Sc.), Urban and Regional Planning

University of Tehran   1992 — 1993
Master's Degree, Aardbevingswetenschap diploma

K. N. Toosi University of Technology   1973 — 1979
Bachelor's degree, Bouwkunde en civiele technik(building& civil engineering)

Experience
Volksuniversiteit Rotterdam   February 2014 - Present
VAC Barendrecht   February 2009 - Present
Gemeente Barendrecht   February 2012 - May 2012
Gemeente Tilburg   April 2010 - July 2010
Gemeente Groningen   April 2005 - August 2008
University of Tehran   1996 - 1999
Gemeente Teheran   1984 - 1995
Ministerie van Woning en Stedenbouw   1982 - 1983

Skills
Windows, Dutch, Illustrator, PowerPoint, Microsoft Office, Logo Design, Engineering, AutoCAD, Graphic Design, SketchUp, Revit, Microsoft Word, Urban, Microsoft Excel, English, MicroStation, 3D, Research, Construction, Budgets, Urban Planning, InDesign, Photoshop

Mohammad Ali Fotouhi Ghazvini

Porto Area, Portugal
Research

Education
Daneshgah-e-Sanati-e-Khaje Nasir-ul-Din Toosi   2006 — 2009
Master of Science (MSc), Power Systems

Guilan University   2001 — 2006
Bachelor of Science (BSc), Electrical Engineering

Experience
GECAD   February 2011 - Present

Skills
Programming, Smart Grid, Energy Efficiency, Embedded Systems, Simulations, Simulink, Linux, Power Electronics, C, Electrical Engineering, Power Systems, Energy, LaTeX, Renewable Energy, Engineering, C++, COMSOL, Matlab, Signal Processing, Pspice

Mohammad Basiri

Düsseldorf, Nordrhein-Westfalen, Germany
Workes at ThyssenKrupp Steel Europe AG
Mechanical or Industrial Engineering

Education
Universität Duisburg-Essen, Standort Duisburg   2011 — 2014
Master's degree, Mechanical Engineering

Guilan University   2007 — 2010
Master's degree, Mechanical Engineering

K. N. Toosi University of Technology   2000 — 2005
Bachelor of Engineering (BEng), Mechanical Engineering

Experience
ThyssenKrupp   May 2012 - April 2015
JTKZ   February 2009 - December 2010
Tehran Javan Consulting Co   February 2006 - February 2009

Skills
Mechanical Engineering, Stainless Steel, Petroleum, Python, Steel Design, Engineering, Product Management, Mechanical Product..., Oil/Gas, Steel Structures, Project Engineering, Power Plants, PDMS, Finite Element Analysis, C++, Pressure Vessels, ANSYS, Factory, VBA, CATIA, ASME, Fortran, Metal Fabrication, Microsoft Office, Oil & Gas Industry, Mechanical Desktop, Engineering Design, Project Management, Autodesk Inventor, Steel, SolidWorks, Abaqus, Refinery, Manufacturing, Matlab, AutoCAD, Offshore Oil & Gas, Oil & Gas, Product Design, SAP

Mohammad Esmaeil Akbari Azirani

Hannover Area, Germany
Master Student at Institut für Informationsverarbeitung (TNT), Leibniz Universtät Hannover
Telecommunications

Education
Leibniz Universität Hannover   2012 — 2015
Master’s Degree, Telecommunications Engineering

K. N. Toosi University of Technology   2007 — 2012
Bachelor’s Degree, Electrical, Electronics and Communications Engineering

Experience
Institut für Informationsverarbeitung (TNT), Leibniz Universtät Hannover   November 2014 - July 2015
Leibniz Universität Hannover, Germany   September 2012 - July 2015
Fachsprachenzentrum (FSZ), Leibniz Universität Hannover   April 2014 - December 2014
Radio Frequency Systems (RFS)   April 2014 - September 2014
Institut für Hochfrequenztechnik und Funksysteme (HFT); Leibniz Universität Hannover   June 2013 - March 2014
Institut für Quantenoptik (IQO), Leibniz Universität Hannover   October 2012 - March 2014
Hannoversches Zentrum für optische Technologien (HOT), Leibniz Universität Hannover   June 2013 - August 2013
Laboratorium für Informationstechnologie (LFI), Leibniz Universität Hannover   November 2012 - May 2013
IRAN University of Medical Sciences (IUMS)   February 2011 - March 2011
Institut für Turbomaschinen und Fluid-Dynamik (TFD), Leibniz Universität Hannover   December 2009 - May 2010

Skills
Programming, Simulations, Research, Microwave Engineering, Microsoft Excel, Antenna Measurements, PSpice, Electrical Engineering, Telecommunications..., Matlab, Microsoft Office, LaTeX, PowerPoint, RF Engineering, C, C++, Signal Processing, Microsoft Word, Simulink, Antennas

Mohammad Homaei

Randers NV, Region Midtjylland, Denmark
Electrical Engineer, SAS
Electrical/Electronic Manufacturing

Education
K.N.Toosi University Of Technology (http://www.kntu.ac.ir)   2005 — 2008
Master's Degree, Electrical Engineering

K. N. Toosi University of Technology   2000 — 2005
Bachelor's Degree, Electrical Engineering

khaje nasir

Experience
Peimann Khotoot Gostar Co.   June 2012 - January 2015
Peimann Khotoot Gostar Co.   November 2011 - June 2012
Peimann Khotoot Gostar Co.   February 2009 - November 2011
Peimann Khotoot Gostar Co.   March 2008 - February 2009
Peimann Khotoot Gostar Co.   April 2006 - March 2008
NRI   September 2005 - April 2006

Skills
Electricians, Control Systems Design, Power Generation, PLC, SCADA, Electrical Engineering, Project Engineering, Automation, Engineering, Switchgear, Matlab, Power Systems, Power Distribution, DCS, High Voltage, C

Mohammad Hossein

Finland
International Project Manager at SAFIN
Financial Services

Education
Tampere University of Technology   2012 — 2015
Master's Degree, Business and Technology

Daneshgah-e-Sanati-e-Khaje Nasir-ul-Din Toosi   2007 — 2012
Bachelor of Science (BSc), Aerospace, Aeronautical and Astronautical Engineering

Moscow State Aviation Technological University   2007 — 2012
Bachelor's Degree, Aeronautical/Aerospace Engineering Technology/Technician

Allameh Helli   2003 — 2007
High School Diploma, Mathematics and Physics, A

Experience
SAFIN   August 2015 - Present
Lionbridge   February 2014 - October 2014
FlexIT Finland Oy   January 2014 - July 2014
FlexIT Finland Oy   September 2012 - December 2013
Propulsion and Power Systems Engineering Research Institute   March 2011 - August 2011
Mofid Vanak   September 2009 - July 2010
Mofid Vanak   August 2009 - July 2010

Skills
Teaching, Optimizations, Rapid Prototyping, Idea Generation, Russian, Microsoft Excel, Knowledge Management, Persian, Product Development, Project Management, Programming, Teamwork, English, Project Planning, Optimization, Open Book Management, Business Strategy, Team Leadership, Microsoft Office, Solidworks, Strategic Planning, Youth Mentoring, Mockups

Mohammad Nili

Bristol, Bristol, United Kingdom
Student at UWE

Education
UWE   2013 — 2016
Master of Science (MSc), Information Technology

K. N. Toosi University of Technology   2007 — 2012
Bachelor of Science (BSc), Information Technology

K. N. Toosi University of Technology


Skills
Leadership, User Experience, Databases, Microsoft Office, Microsoft Excel, MySQL, HTML, Project Management, Strategic Planning, Customer Service, C#, Research, PowerPoint, Microsoft Word, C++, PhpMyAdmin, Management, iOS Development, PHP

Morteza Hassanzadeh

Gothenburg, Sweden
Research

Education
Chalmers Tekniska Högskola   2008 — 2010
MSc

K. N. Toosi University of Technology   1998 — 2003
Bachelor of Science (BSc)


Skills
Matlab, Mathematical Modeling, Engineering, Automotive, Finite Element Analysis, Vehicle Dynamics, Catia, Numerical Analysis, ANSYS, Simulations, LaTeX, Automotive Engineering, Simulink

Mostafa Khalili

Dresden, Sachsen, Germany
Research Associate at TU Dresden
Telecommunications

Education
Technische Universität Dresden   2015 — 2019
Doctor of Philosophy (Ph.D.), Electrical, Electronics and Communications Engineering

Ulm University   2012 — 2014
Master of Science (M.Sc.), Electrical, Electronics and Communications Engineering

K. N. Toosi University of Technology   2007 — 2011
Bachelor of Science (B.Sc.), Electrical, Electronics and Communications Engineering

Experience
Universität Ulm   2012 - 2014
Khaje Nasir Toosi (K. N. Toosi) University of Technology   February 2010 - September 2011
Tezhab-sad   June 2010 - September 2010

Skills
CDMA, Simulink, 3G, Wireless, GSM, RF, C++, LaTeX, Simulations, Stochastic Processes, OFDM, Microwave, PSpice, C, Programming, Microsoft Office, Signal Processing, MIMO, LTE, Channel Coding, Compressive Sensing, Fiber Optics, 4G, Telecommunications, Matlab, RF Engineering, Antennas, Channel Estimation, UMTS, Ethernet, Cellular Communications, Information Theory

Nader K. Rad, PMP

Leuven Kessel-Lo, Vlaanderen, Belgium
Project Management Consultant, Author, and Trainer
Professional Training & Coaching

Education
Sharif University of Technology   2002 — 2004
Msc, Philosophy of Science

K. N. Toosi University of Technology   1997 — 2002
Bsc, Civil Eng

Experience
Management Plaza   2011 - Present
{freelancer}   May 1997 - March 2013

Skills
Planning/Scheduling, Training, Certified Project..., Project Planning, Management, Project Reporting, Agile Project Management, PMP, Progress Monitoring, Earned Value Management, Information..., Project Management, Cost Engineering, Process Scheduler, Microsoft Project, Software Project..., Project Delivery, Claim Investigation, Schedule Analysis, Risk Management, Scrum, Kanban, CPM Scheduling, Certified Scrum Master..., Project Portfolio..., Schedules, Primavera P6, Scope Management, Program Management, Schedule Control, International Project..., PMO, WBS, PMBOK, Resource Management, Visio, MS Project, Project Coordination, Stakeholder Management, PMI, Analysis, Cost Management, Critical Chain Project..., Claim Analysis, Business Process..., Business Process, PRINCE2, Project Control, Risk Analysis

Nafiseh Ghasemi

Enschede, Provincie Overijssel, Netherlands
PhD Student at University of Twente
Research

Education
K. N. Toosi University of Technology   2008 — 2011
Master’s Degree, Remote Sensing, A

K. N. Toosi University of Technology   2004 — 2008
Bachelor’s Degree, Surveying Engineering, A

Experience
Iran University of Science and Technology   September 2012 - September 2013

Petr T

Ukraine
ответственная ТДВ
Food Production

Education
K. N. Toosi University of Technology

Pouria Zand

Eindhoven Area, Netherlands
Research Engineer at imec
Research

Education
Universiteit Twente   2010 — 2014
Doctor of Philosophy (Ph.D.), Computer Science

University of Tehran   2005 — 2008
Master's Degree, Telecommunications Engineering

K. N. Toosi University of Technology   1999 — 2005
Bachelor's Degree, Electrical Engineering

Experience
imec   January 2015 - Present
NXP Semiconductors   April 2014 - December 2014
University of Twente   April 2010 - March 2014
Farineh FanAvar   May 2007 - March 2010
Farineh San-at Eng. Co.   April 2005 - May 2007

Skills
Embedded Systems, Programming, MAC protocols, Protocol Design, ISA100.11a, C++, Wireless Networking, Foundation Fieldbus, Network Simulation, 802.15.4e, C++ Programming, Microcontrollers, Linux, Scheduling Algorithms, Wireless Sensor Networks, Matlab, Automation, Fieldbus, IPv6, Network Architecture, Simulations, Computer Science, PLC Programming, Routing Protocols, RPL, PCS7, ZigBee, Distributed Systems, OpenWRT, CoAP, Algorithms, NS-2, LaTeX, 802.15.4, WirelessHART, PLC, Contiki, DCS, Modbus

S. Amir Mahmood Najafi

Hannover Area, Germany
Research and Development Engineer at Senvion GmbH & Leibniz Universität Hannover (ScheringInstitute), Germany
Electrical/Electronic Manufacturing

Education
Leibniz Universität Hannover   2012 — 2017
Researcher, High Voltage Engineering

Leibniz Universität Hannover   2010 — 2011
Master's Degree, Power Electrical Engineering

K. N. Toosi University of Technology   2008 — 2010
Master's Degree

Islamic Azad University   2002 — 2007
Bachelor's Degree, Electrical and Electronics Engineering, 1.5

Experience
Senvion SE   February 2015 - Present
Leibniz Universität Hannover, Germany   January 2012 - Present
Atrak Energy   February 2007 - June 2007

Skills
Physics, Programming, Simulink, Algorithms, Mathematica, Linux, English, Photoshop, Science, Microsoft Office, Windows, Microsoft Visual Studio..., C++, Simulations, LabVIEW, Power Electronics, Computer Science, Mathematical Modeling, LaTeX, Signal Processing, COMSOL, Electrical Engineering, Matlab, German, Maxwell, Mac OS, Finite Element Analysis, Labview

Sadegh Mansouri Moghaddam

Gothenburg, Sweden
Doctoral Student at Chalmers University of Technology

Education
Chalmers University of Technology
Doctor of Philosophy (Ph.D.), antenna design and OTA measurments

K. N. Toosi University of Technology
Master’s Degree, Communication, General

Experience
Chalmers University of Technology   October 2014 - Present
Khaje Nasir Toosi (K. N. Toosi) University of Technology   2012 - 2014

Skills
Reverberation Chamber, Research, Antennas, PSpice, CST Microwave Studio, Simulations, HFSS, Optimization, MIMO, OTA, Matlab, Anechoic Chamber, Antenna Measurements, Agilent ADS

Saman Karimi

Odense, Region Syddanmark, Denmark
Sales BackOffice Coordinator at Haarslev Industries
Mechanical or Industrial Engineering

Education
Iran University of Science and Technology   2004 — 2007
Master's Degree, Mechanical Engineering, Air and Space

K. N. Toosi University of Technology   1999 — 2004
Bachelor's Degree, Mechanical Engineering, Fluid Mechanics

Kosar High School   1994 — 1998
High School

Experience
Nardis Co   June 2008 - October 2014
Raahbord Sanat Alborz   February 2009 - March 2014
MMTE (Mines and Metal Technology and Engineering)   April 2006 - June 2008
ASCO (Ab Gostar-E-Shargh)   May 2004 - April 2006
Mahab Ghodss Consulting Engineering Company   April 2002 - April 2006

Skills
Matlab, Water Treatment, PDMS, Mechanical Engineering, Stress Analysis, CAD, EPC, Commissioning, Oil/Gas, Gas, Power Plants, Hydraulics, FEED, Fluid Mechanics, LNG, Valves, PDS, Pressure Vessels, Oil & Gas, Engineering Design, Procurement, AutoCAD, Factory, Energy, CAESAR II, Pipelines, Pro Engineer, Navisworks, Plant Design, Construction, Calculations, Piping, Project Engineering, Offshore, Petrochemical, HAZOP Study, Water, Petroleum, Materials, Heat Exchangers, SolidWorks, Onshore, Refinery, P&ID, ASME, Engineering, Pumps, Process Piping Design, HAZOP

Shahram Honarvar

Korschenbroich, Nordrhein-Westfalen, Germany
General Manager at TMS GmbH
Import and Export

Education
K. N. Toosi University of Technology   1992 — 1999
Master, Energiewandlung

Experience
TMS GmbH   October 2013 - Present

Skills
Marketing, Adobe Photoshop, Microsoft Word, Kundendienst, Unternehmensführung, Microsoft Office, Projektmanagement, Microsoft Excel

Shahram Honarvar

Cologne Area, Germany
General Manager TMS GmbH
Machinery

Education
   1992 — 2000
Master of Science (M.S.) , Maschinenbau

Experience
TMS GmbH   October 2013 - Present
FMS GmbH   September 2008 - May 2012

Skills
Geschäftsführung

Sina Khanalizadeh

Frankfurt am Main, Hessen, Germany
Manager
Business Supplies and Equipment

Education
K. N. Toosi University of Technology
Engineering

Experience
Self-employed   June 2014 - Present

Skills
Strategic Planning, Project Management, Customer Service, Microsoft Excel, Research, Business, Engineering, Trading, PowerPoint, Project Planning, Microsoft Office, Budgets

Soheil Mohammadi

München, Bayern, Germany
Development and Test Engineer
Automotive

Education
Technische Universität München   2011 — 2013
Master's Degree, Communications Engineering

K. N. Toosi University of Technology   2005 — 2011
Bachelor's Degree, Computer Engineering

Experience
in-tech GmbH   February 2015 - Present
T-Labs, Telekom Innovation Laboratories   March 2014 - August 2014
Institue for Media Technology, Technische Universität München   February 2013 - September 2013
Institute for Communications Engineering, Technische Universität München   August 2012 - September 2012

Skills
MAX+Plus II, AVR Studio 4, Algorithms, Hardware Security, Cryptography, CodvisionAVR, FPGA, C, x86 Assembly, ISE (HDL), Digital Signal..., Xilinx, Eclipse, AVR Assembly, Python, Signal Processing, C#, GNU Radio, Matlab, Computer Architecture, Microsoft Office, Linux, Information Theory, Computer Vision, Pspice, VHDL, Machine Learning, Digital Image Processing, Channel Coding, C++, Pattern Recognition, Teamwork, ModelSim, LaTeX

Zahra Sadeghi

Holmbury St Mary, Surrey, United Kingdom
PhD student
Research

Education
UCL   2015 — 2016
Researcher

K. N. Toosi University of Technology   2012 — 2016
Doctor of Philosophy (Ph.D.), Remote Sensing-SAR Interferometry

rajayee

Experience
University of Leeds   2015 - 2015

Skills
Cell Culture, LaTeX, Microsoft Office, GIS, ArcGIS, Image Processing, Science, Microsoft Word, AutoCAD, Microsoft Excel, Matlab, Research, Spatial Analysis, Remote Sensing, Molecular Biology

ali dabagh

Finland
Attended DaneshgaheSanatieKhaje NasirulDin Toosi

Education
K. N. Toosi University of Technology   2008 — 2012

arash kia

Ireland
Student at DaneshgaheSanatieKhaje NasirulDin Toosi
Mechanical or Industrial Engineering

Education
K. N. Toosi University of Technology   2005 — 2008

mohammad mohammady

Romania

Education
K. N. Toosi University of Technology

shahab shariat bagheri

Paris 13, Île-de-France, France
Maser Student at TELECOM ParisTech
Telecommunications

Education
Telecom ParisTech   2014 — 2015
Master's degree, Digital Communication Systems (Systèmes de Télécommunications Numériques)

K. N. Toosi University of Technology   2011 — 2014
Electrical Engineering and Telecommunications, Telecommunications Systems, 17/20

Sharif University of Technology   2010 — 2011
Bachelor of Applied Science (B.A.Sc.), Mathematics

Allameh Tabatabai High School   2006 — 2010
Mathematics and Physics, 19/20

Experience
IEEE Signal Processing Magazine   2013 - Present
DASH7 Alliance   January 2015 - July 2015
Khaje Nasir Toosi (K. N. Toosi) University of Technology   2012 - 2014
NASIR Co.   June 2012 - September 2012

Skills
4G, GNU Octave, telecommunications..., Data Processing, Coding Languages, LaTeX, Github, Channel Coding, Digital Communication, Persian, Mathematics, Optimization, Git, Signal Processing, Big Data, Linguistics, Data Mining, Matlab, Linux, OFDM, French, Karate, Java

shahin M. Ebrahimi

Stuttgart Area, Germany
Research Assistant at University of Stuttgart
Electrical/Electronic Manufacturing

Education
University of Stuttgart   2014 — 2016
Master of Science (M.Sc.), INFOTECH (Embeded Systems)

K. N. Toosi University of Technology   2009 — 2013
Bachelor of Science (B.Sc.), Electrical and Electronics Engineering, 78%

JADE Hochschule, Germany   2012 — 2012
Summer School, Biomedical Enginnering

Experience
University of Stuttgart   January 2015 - Present
Nikan   September 2011 - September 2013
Khaje Nasir Toosi (K. N. Toosi) University of Technology   October 2012 - May 2013
Khaje Nasir Toosi (K. N. Toosi) University of Technology   October 2011 - May 2013

Skills
Project Management, Java, C++, Arduino